Need Help?
Call
Lower hinge bracket secures the refrigerator door at the bottom, allowing smooth pivoting. Replace if bent, cracked, or causing door misalignment and sagging.
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more
Black plastic cam that the refrigerator door rides on to open and close smoothly. Replace if cracked, worn, or broken causing door misalignment issues.
The right door on our Jenn Air French Door Refrigerator would pop open & not fully close when the left door was closed first. Called the local distributor/dealer who advised me that the magnetic door gasket probably needed replacement (cost $300.00 + for the repair) What??? Visited you web site where I noted the right door had a "closure & bushing" on the bottom of the door. Could it be this was the problem fix? Took the right door off & examined both pieces. Sure enough the bushing was... Read more
Replacement lower hinge pin for refrigerator doors. Acts as a pivot point to hang and support the door. Replace if worn, broken, or missing from a move.
I ordered a refrigerator door hinge, hinge pin, and washer. The descriptions and pictures imply that these items are sold separately. However, the hinge I received was an assembly that included a pin and washer. I replaced the original hinge assembly with the new assembly, but the door still sagged (not as badly as before). I added the washer I had ordered separately and the original washer (total of 3 washers). The refrigerator doors seems to be closing properly now. I still have an extra... Read more
Secures the top of your refrigerator door to the cabinet. Replace if cracked, broken, bent, or lost during a move to restore proper door alignment.
I ordered online to AppliancePartPros.com for the fridge door hinge and after quick delivery I spent 15 minutes to securely fit the door back on the frig. I'm sure to do business again for parts if needed. Read more
Plastic bearing that sits in the upper hinge, allowing the refrigerator door to swing smoothly and quietly. Replace if cracked, worn, or broken.
Went to site at 4pm central, found part, watched repair video, ordered part, part arrived NEXT MORNING, replaced part, door works perfectly. Total time for web research, ordering AND repair: Less than 30 minutes. Total cost with delivery: $21.66. Door works just like new. It doesn't get any better than this folks. Read more
Replacement door closer cam for refrigerator hinges. Installs on upper door hinge to control door swing and prevent cabinet damage. Needed when cracked or worn.
I called Appliance Parts Pro told them what I needed it and the model of the refrigerator. They told me exactly what I needed and also made suggestions to make sure I had enough parts to accomplish the task. Read more
Bearing insert for freezer door hinges. Replaces worn or damaged bearings that cause stiff door operation or poor alignment. Installs in hinge bracket.
Removed door and replaced bottom bearing. Read more
Supports and pivots the refrigerator door at the center hinge bracket. Replace if worn, damaged, or missing to restore smooth door swing and alignment.
You guys had the exact hinges I needed and I was able to get the frig up and running shorty Read more
The Door Hinge is an OEM part for Whirlpool dryers. This hinge ensures the secure attachment of the dryer door to the appliance, allowing it to open and close smoothly. Right-hand hinge. For the left hinge use AP3047600
Causes of a bad door hinge can include regular wear and tear, accidental impacts, or overloading the door.
Symptoms of a bad door hinge include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Watched your very helpful and informative "how to" video and replaced both right and left hinges. Getting the front panel to line up on the clips was the most difficult part. Read more
Limits door opening angle to prevent overextension and cabinet strikes. Replace if worn, broken, or missing to restore controlled door travel.
Replaced these parts Read more
Plastic door stop that cushions refrigerator door closure and prevents impact damage to walls or cabinets. Replace if cracked, broken, or missing.
I ordered the door stops (or door cams) for both the fridge and freezer and the hinge bearings. I figured I might as well do both if I'm going to do one. Very easy. Watched a YouTube video. Got a link to the site to order the parts. All you need is a screwdriver and ratchet. Done in 30 minutes. Read more
Limits how far the refrigerator door swings open. Replace this stop if it's worn, broken, or missing to protect the hinge and prevent door overextension.
The plastic bearing broke after 7 years of too much opening and closing. Removing original bears were not real easy, however installing new ones were quick. It works well. The parts arrived really quickly. Read more
Left hand hinge. For right hinge use WP8066056
Replaces worn or broken refrigerator door closer cam that installs at the bottom hinge. Restores smooth door action when the original is cracked or damaged.
Watched the video at Appliance Parts Pros. Followed the video. I was fixing the refrigerator door (a little easier then the freezer door). The repair was very simple and took less then 15 minutes. Read more
Supports the freezer door on the hinge pin for smooth opening and alignment. Replace if worn, cracked, or missing to stop door sagging or scraping.
Hinge component that guides the cam for self-closing door action. Replace if cracked, broken, or worn to restore smooth door swing and proper alignment.
Emptied the door, removed the top door hinge plate, removed the door, then removed the damaged lower hinge plate and bushing, and then replaced them with the new parts. Everything went back together just fine, and now the door closes properly, and stays closed! Thanks!! Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.