Dishwasher Duct Parts

The Vent Blower Assembly is an OEM part for Frigidaire dishwashers. It is designed to help ventilate the dishwasher by expelling hot, moist air from the interior after the washing cycle. 

You should replace the vent blower assembly if it becomes faulty. Causes of a bad vent blower assembly can include regular wear and tear, blockages from debris, or electrical issues. A malfunctioning vent blower can lead to poor drying performance and excessive moisture inside the dishwasher.

Symptoms of a bad vent blower assembly include:

• Dishes not drying properly after the wash cycle
• Excessive moisture or condensation inside the dishwasher
• Unusual noises coming from the vent blower area
• The dishwasher emitting warm, moist air less effectively

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Blower Motor Assembly is an OEM replacement part for LG dishwashers. Located inside the wash cavity, it functions to distribute heated air throughout during the dry cycle. Rapid rotation of the blower motor blades works to eject moisture from dishes and ensure thorough drying. 

Causes of a bad blower motor include failure of the motor itself, cracks in the blades that disrupt airflow, or bearing issues preventing proper rotation.

Symptoms include:

• Dishes still feeling damp after a cycle 
• Puddles of water remaining in the bottom of the dishwasher
• Water droplets on upper racks/dishes
• The motor producing grinding/squealing noises on startup

It is also compatible with some Kenmore dishwashers using LG components. 

Replacement door vent directs humid air out during the dry cycle. Install inside the door panel to replace a cracked, clogged, or missing vent.

NOTE: The clamps no longer come with the connector hose. The part number for the clamp is WD01X10322.

Vent assembly for dishwashers. Mounts to the door or tub to allow proper air circulation during wash cycles. Replace if cracked, broken, or missing.

This is a common fastening nut used to secure panels, trim, or components on compatible LG appliances. It provides a simple, reliable way to hold mating parts in place and restore proper fit and function. What it does

• Secures panels, brackets, or hardware to prevent movement or vibration
• Stops rattling or loose parts caused by a missing or worn nut
• Restores proper alignment when replacing damaged or stripped fasteners
• Works where a standard threaded nut is required for reassembly

• One common nut as pictured

• Disconnect power and water before servicing the appliance
• Use the properly sized wrench or socket to avoid rounding the nut
• Do not overtighten; tighten until snug and secure per OEM torque guidance
• Replace like-for-like—thread size and type match the original

Replacement dishwasher vent assembly that directs airflow inside the tub. Install when original vent is cracked, broken, or no longer opens and closes properly.

Replaces a cracked, broken, or missing air duct assembly in your dishwasher. Routes ventilation airflow between internal compartments to maintain proper system performance.

Channels air through your dishwasher to maintain proper ventilation. Replace this duct assembly if it's cracked, damaged, or broken to restore airflow.

Replaces a cracked, broken, or chewed dishwasher door vent bezel. This cover installs on the upper left side of the dishwasher door to protect the vent.

This flapper vent is the replacement exhaust flap that helps control dryer airflow and keeps outside air, pests and debris from entering the vent when the dryer is off. Fits many GE dryer exhaust housings. What it does

• Opens during dryer operation to let moist air escape and closes when the dryer is off to block backdrafts.
• Restores proper airflow when a damaged or stuck flap is preventing venting.
• Helps reduce outside odors, drafts and pest entry through the exhaust opening.
• Works as a simple mechanical replacement—no electrical connections.

• Disconnect the dryer from power and, if applicable, turn off gas before servicing.
• Access the exterior vent or the dryer exhaust housing; replacement typically secures with screws or snaps into the vent housing.
• Inspect and clean the vent duct and housing before installing the new flap to ensure proper operation.

Replacement vent duct for your dishwasher. This connecting duct channels air during the drying cycle. Order a new one if yours is cracked or damaged.

Vapor chamber duct for dishwashers. Installs in the drying system to channel steam and moisture. Replace if cracked, broken, or missing for proper venting.

Vent connector for dishwashers. Installs between vent assembly and tub to channel air flow. Replace if cracked, broken, or missing for proper drying.

Dishwasher vent bezel that covers and secures the drying duct assembly. Replace if cracked, broken, discolored, or missing for a complete appearance.

This vent assembly directs refrigerated air from the evaporator into the fresh-food compartment to help maintain even cooling and airflow. It restores proper air distribution and reduces temperature variation in the refrigerator interior. What it does

• Channels cold air from the evaporator into the fresh-food section for balanced temperature distribution.
• Helps eliminate warm spots and uneven cooling that can cause food to spoil prematurely.
• Reduces airflow noise caused by damaged or misaligned vent components.
• Works with the fridge's air control system to support consistent compartment temperatures.

• Disconnect power to the appliance before beginning any repair.
• Remove interior liners or shelves as needed to access the vent location; use basic hand tools.
• Inspect surrounding seals and mounting tabs during installation; replace if damaged.