Dishwasher Manual, Care Guide

This is a replacement energy guide label — the adhesive sticker that displays a refrigerator or freezer's estimated annual energy use and efficiency rating. Use it to restore missing or damaged labeling for accurate consumer information. What it does:

• Replaces a torn, faded, or missing energy guide sticker so appliance energy info is visible
• Restores manufacturer/retailer-required energy labeling for display or resale
• Helps owners quickly view estimated annual energy use and comparative efficiency
• Serves as a direct cosmetic and informational replacement without affecting appliance function

• One replacement energy guide label (adhesive-backed)

• Clean and dry the application area; remove any old adhesive before applying
• Peel backing and press label firmly; smooth out bubbles for a secure bond
• Apply to a flat, visible surface on the appliance where original label was located
• Non-electrical part — no tools or wiring needed; replace with appliance powered off for best access

This replacement Energy Guide label restores the factory energy-rating label so your appliance displays required efficiency info and model details clearly. It's a direct cosmetic/identification replacement for a missing, faded, or damaged label. What it does:

• Replaces a torn, faded, or missing Energy Guide sticker so energy-use info and ratings are visible
• Restores factory identification and the printed efficiency/consumption information
• Helps meet labeling requirements for resale or service identification
• Provides the original look and placement when applied in the correct location

• One adhesive Energy Guide label

• Surface must be clean, dry, and free of oils or residue before applying
• Align carefully and press firmly; smooth from center outward to avoid bubbles
• Intended as a cosmetic/identification replacement only; does not affect appliance operation
• If label area is textured or damaged, consider a smooth restoration first for proper adhesion

This replacement Energy Guide label is the adhesive sticker that displays an appliance's estimated yearly energy use and operating cost in plain, easy-to-read format. It restores a legible energy information label for appliances with missing, damaged, or faded guides. What it does:

• Shows the estimated yearly energy consumption and cost information found on the original Energy Guide label
• Replaces torn, worn, or illegible labels so energy info is visible again
• Helps consumers compare energy use when evaluating or reselling an appliance
• Fits where the original factory label was mounted — typically on the interior or exterior cabinet

• One (1) adhesive Energy Guide label

• Surface-mount sticker: clean and dry the application area before installing for best adhesion
• Peel the backing and press firmly to apply; smooth out any bubbles
• Avoid installing on wet or heavily textured surfaces; not reusable once removed
• Dispose of the old label properly; no special tools required

This energy guide label is the factory replacement sticker that displays verified energy consumption and efficiency information for a refrigerator. It restores the visible energy-rating label so users can quickly confirm estimated energy use. What it does

• Shows the appliance's official energy consumption and estimated yearly operating cost.
• Restores a missing or damaged energy rating label for resale, service, or regulatory compliance.
• Helps owners verify efficiency details without opening the appliance.
• Peels and sticks to a clean, flat exterior surface for long-lasting placement.

• Clean and dry the mounting area thoroughly before applying.
• Peel backing and press label firmly, smoothing out air pockets.
• Align label carefully; adhesive is permanent and may not re-adhere once removed.
• Follow any local disclosure or placement requirements when replacing the label.

This replacement energy guide label restores the factory energy-use information on your appliance so estimated energy and efficiency details are readable and compliant. It's a simple, low-cost way to replace a faded, damaged, or missing label. What it does

• Replaces the appliance's energy guide label so estimated energy consumption and rating info are legible.
• Helps when the original label is faded, torn, or removed and needs a clear, visible replacement.
• Provides the same informational purpose as the factory-applied label; does not affect appliance performance.
• Useful for resale, compliance, or when verifying energy usage details printed on the appliance.

• One adhesive energy guide label.

• Surface must be clean, dry, and free of grease; use a mild cleaner and dry completely before applying.
• Peel backing and smooth label onto a flat area; align carefully—adhesive is permanent.
• Do not apply to textured or heavily curved surfaces where adhesion may fail.

This genuine replacement energy guide label restores the factory energy-use information and rating on your appliance so you can read performance data at a glance. It's a direct-fit adhesive label made to match the original. What it does:

• Replaces a torn, faded, or missing energy guide so energy consumption and rating details are visible
• Restores the factory-applied regulatory and efficiency information required for resale or inspection
• Helps you appliance energy use and estimated yearly cost as printed on the original label
• Simple peel-and-stick replacement—no tools required for the label itself

• Clean and dry the surface area thoroughly before applying; remove any residue or old adhesive
• Align the label carefully and press firmly from the center outward to avoid bubbles
• No electrical work required; install only at room temperature for best adhesion
• Dispose of old label according to local recycling/ disposal rules

This is a replacement energy guide label that restores the factory energy-use and efficiency information on the appliance. It provides a clear, adhesive-backed label that matches the original for identification and resale requirements. What it does:

• Displays the appliance's energy usage and efficiency information as shown on the original label.
• Replaces faded, torn or missing labels so energy information is legible for buyers and service techs.
• Helps maintain the appliance's original appearance where the label is required or expected.
• Fits where the factory energy guide was applied; adhesive backing provides a permanent attachment on smooth surfaces.

• Clean the surface thoroughly and remove any old adhesive or debris before applying.
• Peel backing and press label firmly in place, smoothing out air bubbles.
• Apply only to smooth, dry, non-porous surfaces for best adhesion.
• Do not use near high-heat areas or where label could obstruct vents or controls.

This Energy Guide label is the factory appliance sticker that displays estimated energy use and efficiency information so owners can verify the appliance's rated energy performance. It replaces a missing or damaged label to keep the appliance compliant and informative. What it does

• Shows the appliance's estimated annual energy consumption and cost information printed on the factory Energy Guide sticker
• Restores the visible energy-rating information used for comparisons and reference
• Helps comply with visible labeling expectations after label damage or removal
• Useful when preparing an appliance for resale, inspection, or documentation

• One Energy Guide label (sticker) as shown

• Peel-and-stick replacement; surface should be clean, dry, and at room temperature for best adhesion
• Align carefully before applying — once adhered, repositioning may be difficult
• Wear gloves to avoid smudging printed surface during installation

This replacement energy guide label restores the factory appliance rating sticker so you can view estimated energy use and efficiency details required for reference. It keeps your appliance compliant-looking and information readable. What it does:

• Replaces a missing, torn, or faded energy guide sticker so energy-use info is visible
• Provides the appliance's estimated annual energy consumption and rating panel in original format
• Helps buyers and service technicians quickly identify energy-use information during inspections
• Restores the factory-applied label appearance without altering appliance function

• One replacement energy guide label

• Peel-and-stick application: clean and dry the mounting area before applying
• Align carefully; adhesive is permanent and may not reposition well once attached
• Avoid placing over seals, vents, or moving parts

This is a replacement Energy Guide label that restores the original energy-use and efficiency information on your appliance. It provides the visible markings required for reference and resale value. What it does:

• Replaces a missing, damaged, or faded Energy Guide label so energy information is legible.
• Restores factory identification and energy-consumption details typically found on the appliance.
• Helps satisfy resale or inspection expectations by supplying the correct on-appliance label.
• Improves usability by making the official energy ratings easy to read at a glance.

• Clean and dry the mounting surface before applying; remove old adhesive residue for best adhesion.
• Align the label carefully, then press firmly to ensure full contact; do not stretch or fold the label.
• For best results, apply at room temperature and avoid repositioning once adhered.
• This is a cosmetic/informational part only; no electrical work is required to install.

This replacement Energy Guide label restores the appliance's factory energy-use info and on-appliance rating sticker so usage and efficiency details are readable. It's a simple adhesive label made to match the original factory marking. What it does

• Displays the appliance's energy-consumption information and rating details in the original on-unit location.
• Replaces faded, torn, or missing energy guide stickers so required energy information is visible.
• Helps technicians and owners verify appliance energy-use data during service or resale.
• Keeps the appliance looking complete with a manufacturer-style label.

• One adhesive Energy Guide label (single sticker only).

• Clean and dry the mounting surface before applying to ensure adhesive bonds properly.
• Peel the backing and align carefully; apply firm pressure to remove air bubbles.
• Do not stretch or fold the label; replace only if the original label location is intact and flat.

This replacement Energy Guide label is the adhesive sticker that displays an appliance's official energy use and efficiency information. It restores missing or unreadable labeling so buyers and service techs can see the appliance's energy guidance. What it does

• Replaces a torn, faded or missing Energy Guide sticker so the appliance shows its official energy-use information.
• Restores readable energy and efficiency details typically found on refrigerators and similar appliances.
• Helps clarify operating cost and efficiency ratings for resale, service, or inspection.
• Cosmetic replacement only—does not affect appliance operation or performance.

• One Energy Guide label (adhesive sticker)

• Clean and dry the installation area; remove old adhesive residues before applying.
• Peel and stick the label in the original location; align carefully—adhesive is permanent once applied.
• No tools or electrical disconnection required for label replacement; handle gently to avoid creasing.
• Replace only with the correct OEM label for accurate energy information.

This Energy Guide label is the official adhesive sticker that displays a refrigerator's estimated energy use and efficiency info. It replaces a damaged or missing energy rating label so you can keep appliance labeling accurate. What it does:

• Shows the appliance's estimated yearly energy use and efficiency information
• Restores required consumer-facing energy labeling for resale or inspection
• Helps clarify energy-cost expectations when evaluating appliance performance
• Replaces a torn, faded, or missing factory sticker on the cabinet or inner panel

• Clean and dry the mounting surface before applying to ensure good adhesion
• Peel protective backing and press firmly, smoothing out any air bubbles
• Apply to a flat, accessible area where label is visible and not subject to frequent wear
• If replacing a damaged label, remove residue with an appropriate adhesive remover and follow manufacturer surface prep recommendations

This is an adhesive Energy Guide label that mounts on the appliance exterior to show the manufacturer's estimated energy use and rating. Replaces a missing, torn, or unreadable energy guide so ratings are clearly visible. What it does:

• Displays the appliance's estimated energy consumption and efficiency information.
• Restores required labeling if the original guide is damaged or removed.
• Helps homeowners verify energy rating details at a glance.
• Common symptom: label is missing, badly faded, or illegible.

• Surface must be clean, dry, and free of oils or residue before applying.
• Peel-and-stick installation; align carefully—adhesive is permanent and difficult to reposition.
• No tools required; follow the original label location and orientation for compliance.