Dishwasher Panel Parts

The Panel Facia is an OEM part for Bosch dishwashers. It is the front control panel of your dishwasher, providing a clean and polished look.

A bad panel facia can occur due to wear and tear over time, accidental damage, or exposure to moisture and cleaning agents. Signs of a faulty facia include cracks, discoloration, or a loose fit that compromises the aesthetic appeal of your dishwasher.

Symptoms of a bad panel facia include:

• Cracks or visible damage on the surface
• Discoloration or fading
• A loose or missing panel

Replace your damaged or worn-out panel facia with this genuine OEM Bosch part to restore the appearance of your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This outer dishwasher door panel restores the appliance's front appearance and provides a finished, protective surface for the door. Fits replacement needs where the original panel is scratched, dented, or cosmetically worn. What it does:

• Replaces the outer door surface to restore the dishwasher's exterior finish and color
• Covers and protects internal door components from everyday wear
• Helps maintain a flush, sealed appearance around the door edge
• Addresses symptoms such as visible dents, deep scratches, paint wear, or detached/loose outer door skin

• Disconnect power to the dishwasher before beginning any service
• Exterior trim, handle, or insulation may need to be removed or transferred during installation
• Support the door when loosening fasteners to prevent dropping or damage
• Follow the manufacturer's service instructions for proper alignment and torque of door hardware

Color: Black

This inner door is the interior panel for a dishwasher door that protects internal components and provides a finished inside surface. Replacing a damaged inner door restores proper sealing and appearance. What it does:

• Forms the interior surface of the dishwasher door and helps contain water during cycles
• Protects wiring, insulation, and electronics housed inside the door
• Helps maintain a proper seal to prevent leaks and improve wash performance
• Addresses symptoms like visible door damage, interior rust, dents, or moisture inside the door cavity

• Disconnect power and water supply before starting any repair
• Removing the outer door panel or control panel may be required;
• Keep fasteners and trim organized for reassembly; some clips or screws may be needed

This outer refrigerator door restores the appliance's exterior and helps maintain proper sealing and temperature control. It replaces a cracked, dented, or damaged door to improve appearance and function. What it does

• Replaces a damaged outer door panel so the fridge can close properly and look like new
• Helps maintain an effective seal when used with an intact gasket, reducing cold air loss
• Stops drafts and visible damage that can lead to higher energy use or interior moisture
• Works with existing hinges and trim when the correct hardware is transferred

• Disconnect power to the appliance before starting and remove food from door shelves as needed
• Transfer existing hinge assemblies, handles, trim, and gasket to the new door unless this part specifically includes them
• Use caution when lifting and aligning the door to avoid chipping paint or damaging the hinge pins
• If you see missing or damaged hardware, get the required screws/hinges separately.

This control panel is the user-facing interface that holds the appliance's buttons and display, restoring a clear, responsive control surface for selecting cycles and options. It replaces a cracked, faded, or unresponsive panel to improve usability. What it does:

• Provides the physical buttons and display area for selecting cycles, options, and settings
• Restores tactile button response and readable indicators when the original panel is damaged or worn
• Addresses symptoms such as stuck or non-responsive buttons, cracked or cosmetic damage, and unreadable labels
• Works with the appliance's existing electronic controls and wiring harness

• Disconnect power to the appliance before beginning any work to avoid shock
• Remove the console or access screws as required; handle painted or plastic finishes carefully to avoid scratching
• Reuse factory fasteners and verify tab alignment before fully tightening
• If buttons or display still don't work after replacing the panel, test the underlying control board and wiring harness

This control panel is the user-facing interface that houses the appliance's buttons and display so you can select cycles and monitor status. It restores a worn or damaged console for normal operation and clear feedback. What it does:

• Provides the front-mounted buttons and display used to select cycles and options
• Transmits user selections to the appliance's main control for proper operation
• Replaces faded, cracked, or unresponsive panels that make controls hard to read or press
• Helps restore a secure mounting surface for switches and indicators

• One replacement control panel

• Disconnect power (and water, if applicable) before beginning any repair to avoid shock or injury
• This panel typically mounts to the console with screws or clips; remove trim to access mounting hardware
• Handle with care to avoid damaging button surfaces or display lens during installation

This inner door panel replaces a damaged or worn internal door surface to restore a clean, secure oven/microwave door interior and support proper window assembly alignment. It fits behind the outer door and holds the inner glass in place. What it does:

• Replaces cracked, chipped, or warped inner door surface that can trap debris or affect door closure
• Restores the inner layer that helps keep the door assembly aligned and stable
• Reduces rattling or vibration caused by a loose or broken inner panel
• Helps maintain a clean interior appearance by covering internal components

• Disconnect power (and gas, if applicable) and allow the appliance to cool before starting
• Handle the panel carefully—sharp edges or glass may be exposed; wear gloves and eye protection
• Keep all original fasteners and note screw locations
• After installation, confirm the door closes and seals correctly and test the appliance on a short cycle

This part is a dishwasher control panel. The purpose of this part is to house the display and the selection buttons that control the dishwasher functions. The buttons on the control panel may not work if it has gone bad. If nothing is showing up on the display, this is another indicator that this part will need to be replaced. The user can attempt to reset the control panel using the manufacturer's instructions. If this does not work, it will need to be replaced. If unable to determine the issue, contact a professional. Unplug the dishwasher from the electrical outlet prior to attempting to replace this part. Wear work gloves to protect the hands.This part is compatible with dishwashers that are manufactured by the Whirlpool and KitchenAid brands. The control panel comes directly from the manufacturer and is a genuine OEM part. It is sold individually.

This facia panel replaces a damaged or worn control panel bezel to restore the dishwasher's front appearance and provide a secure surface for buttons and the control display. It keeps controls protected while improving cosmetic fit and finish. What it does:

• Replaces cracked, dented, or scratched control panel bezel that affects appearance
• Provides the mounting surface for control buttons and display components
• Helps prevent moisture and debris from reaching internal controls
• Restores proper alignment and tactile feel of front controls

• Disconnect power and water supply before beginning any repair
• Removal typically requires opening the door and removing trim screws; keep fasteners for reassembly
• Handle edges carefully to avoid cuts or damage to the panel finish

This outer door panel is the exterior panel that restores the appliance's front appearance and protects internal door components. Replacing a damaged or dented outer panel brings back a flush, sealed door and improves the unit's look. What it does

• Covers and protects inner door components from impact, moisture, and wear
• Restores proper door alignment and helps maintain the cabinet seal
• Improves cosmetic appearance when the original panel is dented, scratched, or corroded
• Helps prevent debris from entering the door cavity and affecting internal parts

• One outer door panel

• Designed for compatibility with specific OEM door assemblies; fit for your model before ordering
• Handle and trim may need transfer from the old panel; your model's parts diagram
• Use appropriate fasteners and avoid overtightening to prevent panel distortion
• Disconnect power and water (if applicable) and follow general safety precautions before servicing