Dishwasher Basket, Silverware Basket

This silverware basket organizes utensils in the lower rack of your dishwasher so water can reach them evenly. Replacing a cracked or missing basket keeps small items contained and helps prevent interference with the spray arm.

• Holds cutlery and small utensils upright during wash and rinse cycles
• Keeps small items from falling through the rack or onto the heater
• Replace if the basket is cracked, warped, melted, or missing sections
• May help with utensils tipping over, rattling, or blocking the spray arm

• Remove the lower rack, lift out the old basket, and position the new basket in the same location
• Ensure the basket does not obstruct the spray arm and the rack rolls freely
• Handle sharp utensil tips carefully; install with the dishwasher cool and empty

The Silverware Basket is an OEM component specifically designed for Whirlpool dishwashers. Located at the bottom outer edge of the tub, the silverware basket provides designated silverware basket dishwasher spacing to properly clean utensils away from other dishes. 

Composed of crisscrossing finger prongs attached to a reinforced circular base, the basket holds forks, knives, and spoons upright safely in place during wash cycles. Its lightweight plastic construction flexes under pressure without breaking or cracking.

Symptoms of a bad silverware basket include:

• Loose or falling utensils obstructing other spray jets   
• Dull or improperly cleaned silverware after cycles
• Visible cracks, chunks missing, or sharp prongs

Replace with this OEM Whirlpool basket to restore form-fitting function. This part fits Whirlpool, KitchenAid, Jenn-Air and select Maytag and Amana dishwashers.

Color: white. Measures about 2-1/2 inches wide by 6 inches high by 10 inches deep.

This silverware basket is a dishwasher utensil caddy that organizes forks, knives and spoons so cutlery cleans evenly and stays contained during the wash cycle. It fits into the lower rack and helps prevent items from shifting. What it does:

• Holds and separates silverware and small utensils for better cleaning and safer handling
• Keeps loose items from falling into the wash area or blocking the spray arms
• Snaps into the lower dishwasher rack to stay secure during cycles
• Works with standard dishwasher racks that accept a removable utensil caddy

• One silverware basket

• Place the basket into the lower rack and align so it sits securely in the rack slots
• No tools required for standard installation; handle with care to avoid sharp utensils
• Inspect for broken tabs or clips before installing; damaged mounting points can allow the basket to shift
• Clean periodically to remove food buildup and prevent odors

This replacement basket lid is the top cover for the laundry basket assembly, restoring a secure, finished opening so laundry stays contained and the appliance looks and operates as intended. What it does:

• Replaces a cracked, warped, or missing basket lid to restore the basket opening
• Helps keep clothes contained during loading and unloading
• Reduces movement and rubbing that can cause fabric snags or noise
• Restores proper fit and appearance of the basket area

• Disconnect power to the appliance before starting any repair
• Basic hand tools may be required; for disassembly steps
• Handle edges carefully to avoid scratching the finish during install
• If clips or fasteners are damaged, replace them to ensure a secure fit

This door basket is the replacement shelf that mounts to the inside of a dishwasher door to hold small items and organize silverware. It restores secure storage and proper loading on the door for reliable washing. What it does:

• Provides a stable shelf on the dishwasher door to hold small items and cutlery during cycles
• Keeps utensils and small items separated to improve water flow and cleaning
• Replaces cracked, broken or missing door-mounted storage that lets items fall or shift
• Helps maintain proper door alignment and sealing when clipped into place

• One door basket

• Disconnect power to the appliance before beginning any work
• Remove items from the door and open the inner door panel as needed to access mounting clips
• Align the basket with the door mounts and snap or secure it into place; verify it seats firmly

This midline silverware basket holds utensils during wash cycles so forks, knives and spoons stay contained and clean. It replaces a damaged or missing basket to restore proper utensil organization and dishwasher performance. What it does:

• Holds and separates silverware so items wash and drain properly
• Prevents small items from falling to the tub or blocking the spray arm
• Helps maintain wash coverage and prevents utensil nesting that reduces cleaning
• Fits the dishwasher's midline position to match original loading layout

• Remove lower rack to access midline basket; align and snap into the rack grooves per original fit
• No tools usually required, but handle gently to avoid cracking plastic parts
• Inspect surrounding rack clips and supports and replace if broken to ensure secure fit
• Always unplug or disconnect power and follow dishwasher manufacturer's safety instructions before servicing

This replacement silverware basket holds forks, knives and spoons so utensils stay organized and clean during the dishwasher cycle. It restores a convenient, secure place for cutlery and helps prevent nesting for better wash coverage. What it does:

• Holds and separates silverware to improve cleaning and prevent items from nesting
• Provides a removable container that stays in place during wash cycles
• Fits into the lower rack to keep utensils contained and easy to unload
• Helps protect small items from falling to the tub or blocking the spray arm

• No tools typically required; slides or snaps into the lower rack location
• Remove all dishes and power off/dry area before installing to avoid injury
• Inspect rack tines and basket clips for damage; replace if broken to ensure proper fit

A replacement appliance door handle that restores a secure grip and proper operation to a worn or broken handle. Designed to match the original mounting style for a clean, factory-fit appearance. What it does:

• Provides a sturdy grip for opening and closing the appliance door smoothly
• Replaces cracked, loose, or broken handles that affect normal door use
• Restores correct alignment and leverage to reduce strain on door components
• Helps prevent accidental drops or slippage when grabbing the door

• One replacement handle

• Remove power and empty the door area before starting any repair
• Typical install requires removing trim or screws; use manufacturer-recommended fasteners
• Retain original mounting hardware unless the new handle explicitly includes replacements

This durable silverware basket holds forks, knives and other utensils securely during dishwasher cycles so small items stay corralled and clean. Fits into the dishwasher rack to keep cutlery organized and prevent items from falling through. What it does:

• Holds and organizes silverware and small kitchen utensils during wash cycles
• Keeps utensils upright and separated for better cleaning and drying
• Prevents small items from slipping into the dishwasher spray area or drain
• Replaces cracked, broken or missing baskets that allow cutlery to scatter

• No tools required; remove the lower rack and set the basket into the designated rack slots
• Ensure basket snaps or rests securely and does not interfere with rack movement or spray arms
• Inspect basket for cracks or sharp edges before use; discontinue use if damaged
• Always follow the appliance manufacturer's safety and installation instructions

This replacement silverware basket sits in the dishwasher rack and keeps forks, knives, and spoons upright and contained so they wash thoroughly and don't slip through the rack or interfere with spray-arm movement. What it does:

• Holds and organizes flatware during wash and rinse cycles
• Helps separate utensils for better spray coverage and drainage
• Replaces cracked, warped, or missing baskets

• 1 silverware basket

• Open the dishwasher and pull out the lower rack for access
• Lift out the old basket and place the new basket in the same location/orientation
• Ensure the basket seats securely and does not contact the lower spray arm
• Manually spin the spray arm to confirm clearance before running a cycle

This replacement cutlery basket is a single plastic basket that holds forks, knives and spoons securely in your dishwasher rack so small items stay upright and contained for better cleaning and safer unloading. What it does:

• Holds and separates silverware and small utensils during the wash cycle
• Keeps cutlery upright so water and detergent reach all surfaces
• Prevents small items from falling through the rack or collecting in the tub
• Replaces broken, cracked or missing baskets to restore safe storage

• Remove the lower rack to slide the basket into place; no special tools usually required
• Position the basket so it snaps or rests securely in the rack slots
• Check for sharp or damaged edges on cutlery before loading to avoid basket wear
• Keep basket away from direct contact with the heating element and high-heat drying surfaces

The Silverware Basket is an OEM component specifically designed for Whirlpool dishwashers. Located at the bottom of the dishwasher, the silverware basket provides an isolated space for washing smaller silverware and utensils. 

The silverware basket is constructed of durable plastic coated with a non-slip material on the bottom. It features folded edges and reinforced sides to securely hold silverware in place during the washing cycle. Partitions and prongs within the basket help separate pieces and prevent tangling.

Symptoms of a bad silverware basket include:

• Silverware escaping from the basket during the wash cycle 
• Damage, cracks, or loose pieces on the basket
• Missing partitions or prongs

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replace a damaged lower-rack silverware basket to keep forks, knives and spoons organized and secure during dishwasher cycles. This OEM-style cutlery basket restores proper utensil spacing for more consistent cleaning and easier unloading. What it does:

• Holds silverware and small utensils upright in the dishwasher lower rack for improved wash coverage
• Keeps utensils separated to reduce nesting and help water reach all surfaces
• Prevents loose cutlery from falling through the rack and blocking spray arms
• Commonly replaced when the basket is cracked, missing sections, or no longer holds utensils securely

• Remove the lower rack, lift out the old basket and set the replacement into the same position
• No special tools typically required; verify the basket snaps or sits securely in the rack
• Handle sharp utensils carefully during removal/installation
• If rack rails or holders are damaged, inspect those components separately before completing the install