Dryer Blower Wheel Or Fan Blade

This replacement blower wheel for a dryer mounts to the drive motor and pulls air through the drum, lint filter, and exhaust, restoring proper airflow so loads dry efficiently and the appliance runs as intended. What it does:

• Spins with the motor to move air through the drum, lint screen, and exhaust duct
• Maintains airflow needed for even drying and temperature control
• Wear, cracks, or a stripped hub can cause long dry times and weak vent airflow
• Damage or imbalance may produce rattling, scraping, or vibration noises from the blower area

• 1 blower wheel

• Disconnect power; turn off gas supply for gas models before servicing
• Access the blower housing and remove the old wheel from the motor shaft per your model's design
• Clean lint and debris from the blower housing and exhaust duct while open
• Seat the new wheel fully and verify free rotation without rubbing before reassembly

This blower wheel is threaded. For blower wheel for a "D" shaped shaft, order part# {AP4043265}.

Considered a crucial part of the dryer, the blower fan assembly is the part that pulls in air from outside and then circulates that air in the drum to ensure clothing gets dry. After the air is moved around the drum, it is then moved through the exhaust vent. This part is located on the motor shaft and is made of durable plastic. Regular use can lead to wear and tear or damage to this component. If this occurs, the air in the dryer may not dry the clothing. In this case, the blower fan assembly will need to be replaced.If the blower fan assembly needs to be replaced, first the dryer should be unplugged from power. Take the cabinet top off and remove the front panel on the appliance. Take out the drum, remove the motor clamp, and loosen the blower fan so it can be removed. Take it out and replace it with the new blower fan assembly.The blower fan assembly is designed to be used with dryers manufactured by Amana and Speed Queen. It is sold as an individual part. This is an authentic OEM replacement part that is sourced directly from the manufacturer.

This dryer exhaust fan is used on many Admiral, Crosley, Hoover, Magic Chef, Maytag, Montgomery Ward and Norge brands. Size: 3-1/8 inches deep, 8 inch fin diameter, 7-1/8 inch hub diameter, 20 standard fins, 1/2 inch diameter motor shaft, 7/16 inch motor shaft diameter to flat side of shaft. Blower wheel clamp not included. For the clamp order WP312967.

This dryer blower wheel assembly mounts on the drive motor and spins to move air through the drum, lint filter, and exhaust. Replacing a cracked, warped, or stripped wheel restores airflow, reduces noise, and helps prevent overheating or shutdowns. What it does:

• Attaches to the motor shaft to draw and push air through the drum and exhaust duct
• Maintains proper airflow across thermostats/heater for stable temperature control
• Helps resolve weak vent airflow and extended cycle times
• Common symptoms include rattling/scraping from the blower area and motor running with little or no airflow

• 1 blower wheel assembly

• Disconnect power; for gas models, also shut off the gas supply
• Access the blower housing, remove the retainer (clip/nut) as designed for your model, and extract the old wheel
• Clean lint and debris from the housing and duct before reassembly
• Seat the new wheel fully on the motor shaft and verify it spins freely with proper clearance

This replacement blower wheel restores proper airflow by moving air through the appliance's blower housing and out the exhaust. A worn or stripped wheel can cause weak ventilation, vibration, and noisy operation.

• Attaches to the motor shaft and spins to move air through the blower housing and ducting
• Maintains steady airflow for efficient appliance performance and ventilation
• Typical failure signs: reduced airflow at the exhaust, rattling/scraping noises, wobble on the shaft, or cracked/missing fins
• Helps resolve vibration from an out-of-balance or damaged wheel

• Disconnect power; turn off gas supply before servicing
• Access the blower housing; remove debris and inspect seals before installation
• Transfer any reusable retainer, nut, clip, or set screw from the old wheel as required by your model
• Seat the wheel fully and secure per your model design (e.g., reverse-thread, retainer, or set screw); verify free rotation and clearance before reassembly

The BLOWER WHEEL is an OEM part for GE electric dryers. It is housed within the blower motor housing and works to push air through the dryer ducting. During cycles, the rotating blower wheel creates crucial airflow that carries heated air through clothes to dry them efficiently.

Causes of a bad blower wheel can include cracked or broken wheel blades from normal wear and tear over time. Accumulations of lint on the wheel can also reduce airflow and efficiency.

Symptoms of a bad blower wheel include: 

• Insufficient or no air being pushed through the dryer ducting
• Abnormally long drying times and wet clothes after cycles  
• Excessive noise coming from the blower motor area
• Safety features possibly tripping due to motor overheating

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Maintain optimal airflow by replacing your blower wheel with this genuine OEM component.

Includes blower wheel housing, blower wheel and cover. The three parts are no longer available seperate.

This blower wheel assembly moves air through the dryer to support heating and proper exhaust flow. Replacing a worn or damaged wheel restores airflow for more efficient drying and helps prevent overheating. What it does

• Spins with the motor to pull air through the drum and vent system.
• Restores restricted airflow that can cause longer dry times or poor drying performance.
• Reduces unusual noise from a cracked, bent, or loose wheel.
• Helps prevent lint buildup and overheating caused by inadequate ventilation.

• Disconnect electrical power (and gas supply for gas dryers) before beginning work.
• Inspect surrounding components (motor shaft, mounting, ductwork) for damage or lint buildup.
• May require removal of the front or rear access panel; keep track of fasteners and orientation.
• Use caution handling sharp sheet metal edges and dispose of lint and debris safely.

This blower housing assembly replaces the blower chamber that supports the blower wheel and routes air through the dryer for proper tumbling and drying. Restores correct airflow and helps reduce overheating or poor drying performance. What it does:

• Houses and supports the blower wheel to direct airflow from the drum to the exhaust.
• Ensures proper airflow for consistent drying and venting.
• Can address symptoms like weak airflow, long dry times, or unusual blower noise when damaged or cracked.
• Works with the blower wheel and motor to maintain lint passage and exhaust flow.

• Disconnect power before inspecting or replacing the blower housing; follow manufacturer safety procedures.
• Access may require removing the dryer front or rear panel depending on model.
• Inspect the blower wheel and motor for damage or obstructions while replacing the housing.

This genuine replacement wheel helps support and guide the dryer drum so it spins smoothly and quietly. Restores stable drum rotation to reduce rubbing, wobble, and noise from worn or damaged support hardware. What it does:

• Supports the dryer drum at the rear or front bearing to maintain proper alignment
• Helps the drum rotate smoothly to prevent scraping and uneven wear
• Reduces vibration and squealing caused by a worn or broken wheel
• Works with the dryer's axle/shaft and housing to stabilize drum movement

• One wheel as shown

• Disconnect power before starting any repair to avoid electrical shock
• Remove the dryer front or rear panel per the service manual to access the wheel
• Inspect related parts (axle, bearing, clips) and replace if damaged for best results
• Use hand tools and avoid forcing parts; follow the manufacturer's instructions

This blower wheel is the replacement fan wheel that moves air through the dryer to support efficient drying and proper venting. Restores airflow from the dryer drum to the exhaust system for more consistent drying performance. What it does:

• Spins on the motor shaft to draw air over the heating element and through the drum.
• Restores proper airflow to reduce long dry times and improve drying consistency.
• Replaces damaged or unbalanced wheels that cause vibration, wobble, or unusual noise.
• Helps prevent overheating by maintaining proper venting when working with a clean vent system.

• Disconnect power to the appliance before beginning any repair.
• Access typically requires removing the dryer front or rear access panel and the drive belt or motor mounting hardware; follow the model service manual.
• Inspect the motor shaft and blower housing for wear, lint buildup, or obstructions and clean the vent system while replacing the wheel.
• Replace or repair worn motor bearing or shaft components to prevent repeat failures.

This blower assembly circulates air through the appliance to support proper airflow and drying performance. Replacing a worn or damaged blower restores airflow and helps the unit heat and dry efficiently. What it does:

• Moves air through the appliance to support heating and drying cycles.
• Restores proper airflow when the original blower is cracked, blocked, or worn.
• Helps prevent long dry times and overheating caused by restricted airflow.
• Reduces unusual rattling or grinding noises coming from the lower cabinet.

• Disconnect power before servicing to avoid electric shock.
• Access may require removing lower front or kick panels.
• Note blower orientation and duct seals during removal to ensure proper reinstallation.
• If noise or airflow issues persist after replacement, inspect the vent duct and motor bearings.

The Blower Wheel is an OEM part for Whirlpool dryers. This component is responsible for circulating air through the dryer drum and the exhaust vent, ensuring efficient drying of clothes. It helps to maintain the proper airflow, which is crucial for the drying performance and the prevention of overheating.

Over time, the blower wheel can become damaged due to debris, lint buildup, or regular wear and tear. If the blower wheel becomes obstructed or misaligned, it can significantly impact the dryer's efficiency and safety.

Symptoms of a bad blower wheel include:

• Longer drying times
• Unusual noises such as thumping or rattling
• Poor airflow from the dryer vent
• The dryer overheating or shutting down unexpectedly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.