Need Help?
Call or text
The Freezer Ice Maker is an OEM part for Frigidaire freezers. It is responsible for producing ice within the freezer compartment, providing a steady supply of ice cubes.
Causes of a bad ice maker can include wear and tear over time, issues with the water supply line, or electrical problems affecting the ice-making cycle.
Symptoms of a bad ice maker include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Replaced ice maker .it worked out great it work fine now Read more
The Drive Blade is an OEM part for Frigidaire refrigerators. This component is crucial for the ice maker, as it helps to crush and dispense ice properly. The drive blade ensures that ice cubes are broken down to the desired size and pushed through the dispenser efficiently.
Over time, the drive blade can wear out or become damaged due to repeated use, ice buildup, or mechanical stress. Replacing a faulty drive blade is necessary to maintain the ice maker's functionality and ensure a continuous supply of ice.
Symptoms of a bad drive blade include:
Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more
The Defrost Thermostat is an OEM part for Frigidaire refrigerators. This component monitors the temperature of the evaporator coil and triggers the defrost cycle when necessary. By ensuring that the evaporator coil is kept free of ice buildup, the defrost thermostat helps maintain efficient cooling performance and prevents frost accumulation inside the refrigerator.
Over time, the defrost thermostat can fail due to electrical issues, wear and tear, or temperature fluctuations. A malfunctioning thermostat can lead to excessive frost buildup, reduced cooling efficiency, and potential damage to the refrigerator's components.
Symptoms of a bad defrost thermostat include:
REPLACED DEFROSTER, CONDENSER FAN MOTOR AND DEFROST THERMOSTAT. Read more
The Start Device is an OEM part for Frigidaire refrigerators. This small electronic component plays a role in the refrigeration cycle by providing the necessary boost to start the compressor. Without a properly functioning start device, the refrigerator may not cool efficiently, leading to spoiled food and increased energy consumption.
Causes of a faulty Start Device can vary and may encompass electrical failures like short circuits or power surges, overheating of the component, and physical damage or wear due to aging.
Symptoms of a bad Start Device include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Noticed Rolls on the top shelf no longer frozen, though the meat around it still was. Note: This is a good test, keep something that thaws quickly and is not expensive on top shelf, to act as a barometer for your freezer health! I first found a trip online to advance the defrost timer, as a failed timer is a common issue. I advanced the timer, but nothing happened. I emptied the freezer, then removed the thermostat and tested it. No continuity! With the Freezer continuing to thaw, I... Read more
The Defrost Heater is an OEM part for Frigidaire refrigerators. This component is responsible for melting away frost and ice that accumulate on the evaporator coils during the refrigerator's cooling cycle. The defrost heater activates periodically, ensuring that air flow remains unrestricted and the refrigerator can efficiently maintain its set temperature.
Causes for replacement can include a burnt-out heater element, damage to the wiring, or a malfunctioning thermostat that fails to initiate the defrost cycle. These issues can lead to reduced cooling efficiency, increased energy consumption, and potential spoilage of stored food due to fluctuating temperatures.
Symptoms of a bad Defrost Heater include:
The Icemaker Kit is an OEM part for Frigidaire refrigerators. This kit includes everything needed to install or replace the icemaker in the freezer, ensuring a steady supply of ice.
Causes of a bad icemaker can include wear and tear over time, water line blockages, electrical failures, or mechanical issues within the icemaker components. Regular use and exposure to hard water can also contribute to the icemaker's decline.
Symptoms of a bad icemaker include:
Note: The icemaker used in this kit is 241798231 and the water valve is 242252603.
Ordered part and replaced in 10 minutes. Works great and if need future part I know where to go. Read more
The Water Filter Head is an OEM part for Frigidaire refrigerators. This part is important for providing clean, filtered water by ensuring a tight seal and proper flow between the filter and the water dispenser or ice maker.
Causes of a bad water filter head can include wear and tear over time, damage during filter replacement, or a manufacturing defect affecting the seal or the connection points.
Symptoms of a malfunctioning water filter head include:
Watched a video and replaced the manifold in about 25 min. Read more
The Light Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding the light bulb in place and providing the electrical connection needed to illuminate the refrigerator's interior. This ensures visibility inside the refrigerator, helping you easily find and access your stored food items.
Causes of a bad light socket can include electrical malfunctions, wear and tear over time, or damage due to bulb replacements or impact.
Symptoms of a bad light socket include:
Went to the Internet, entered the make and model number, read possible causes, viewed videos on fixes and determined it was probably the socket. Viewed the schematic to determine the correct part number. Ordered a new socket. Received it within three days and in less than 5 minutes replaced the light socket. Problem solved and the light now works. Appreciated the videos, ease in ordering and quick delivery. Read more
The Defrost Heater is an OEM part for Frigidaire refrigerators, playing a critical role in the appliance's defrost system. This component is designed to melt away frost and ice that accumulate on the evaporator coils, ensuring that air can flow freely and the appliance maintains optimal cooling efficiency.
Causes of failure might include a burnt-out heating element, damage to the heater's electrical connections, or a malfunction in the control system that fails to activate the heater during the defrost cycle.
I replaced it with the Mfg. parts bought from AppliancePartsPros.com. The job went very smoothly, I received the parts a day and one-half after ordering them from your website. I am an HVAC contractor and was so pleased with your service that I'll use you again and again. Read more
The Auger Motor is an OEM part for Frigidaire refrigerators. It is responsible for driving the auger, which dispenses ice from the ice bucket out of the dispenser chute.
Causes of a bad auger motor can include electrical issues such as a burned-out motor, wear and tear over time, or damage from a power surge or short circuit.
Symptoms of a bad auger motor include:
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try. All appeared fine then two days later the ice dispenser stopped. I watched a couple of videos and most pointed to the ice auger motor. One video specifically said you... Read more
The Defrost Thermostat is an OEM part for Frigidaire refrigerators and freezers. This part senses the temperature of the evaporator coil and triggers the defrost heater to melt away any accumulated frost. This process ensures that air can flow freely over the coils, keeping the refrigerator or freezer at the correct temperature and preventing overcooling or temperature fluctuations that can spoil food.
Causes of a bad defrost thermostat can include a failure to open or close properly, leading to an overaccumulation of frost on the evaporator coils, or physical damage that prevents it from sensing the correct temperature.
Symptoms of a bad Defrost Thermostat include:
Checked compressor windings - ok. Start relay looked no rattle or burning. Start capacitor seamed ok but hard to check. No 120VC to start relay at any time. Ordered thermistor, and electronic control unit. Figuring it was a bad thermistor not telling the ECU it was warm and to turn on the compressor. Or the ECU was damaged and was not sending the 120v to the compressor. Changed the thermistor first (cheapest part and as Appliance parts pros has a return policy I wanted to start there). ... Read more
The Ice Maker is an OEM replacement part for Frigidaire French doors and side-by-side refrigerators. It automatically produces batches of fresh ice for daily use. Symptoms of an issue include:
Causes can be mineral or scale buildup inhibiting parts, or damage from opening the refrigerator door before harvest is complete. Other causes involve mold growth or freezing of internal components over time. Compatible with Gibson and Electrolux refrigerator models as well, it maintains a constant ice supply.
My frig is a year and a half old, Frigidaire with french doors and freezer drawer. It has an upper ice maker for the door in the frig and a bottom ice maker in the freezer drawer. After noticing the flood, I shut off the water supply to the frig and cleaned up the mess. Didn't know if it was the water solenoid valve that stuck open or if the bottom ice maker got stuck calling for water. This frig has 4 solenoid valves and according to the schematic, two valves are active any time water is... Read more
The Indicator Light is an OEM part for Frigidaire ranges. This light is designed to signal when the range or oven is in operation, providing a visual cue for safety and usability. It typically illuminates when the burners or oven are on, ensuring users are aware of active heating elements.
Causes of a bad indicator light can include electrical malfunctions, wear and tear over time, or damage from power surges or excessive heat.
Symptoms of a bad indicator light include:
The repair was a success. The switch and came looked different from the original. I called Appliance Parts Pro, they lady on the phone said that Frigidaire changed the switch and how to wire it up correctly. Problem solved. It all works as it should. Read more
The Evaporator Fan Motor is an OEM part for Frigidaire refrigerators. It circulates air over the evaporator coils and throughout the refrigerator and freezer compartments, ensuring even cooling and maintaining the desired temperatures. Causes of a bad evaporator fan motor can include general wear and tear over time, electrical failures such as shorts or blown fuses, or physical damage from ice buildup or debris. Symptoms of a bad evaporator fan motor include:
Removed the rear cover from inside the freezer section, found the evap fan not working. Ordered replacement motor, easy change. Read more
The Hinge Bearing is an OEM part for Frigidaire refrigerators. This bearing is designed to support the refrigerator door, ensuring it opens and closes smoothly. It helps maintain proper alignment and balance of the door, preventing it from sagging or becoming misaligned.
You should replace the hinge bearing if it becomes worn out, damaged, or broken. Common causes of a bad hinge bearing include regular wear and tear, frequent opening and closing of the door, and accidental impacts.
Symptoms of a bad hinge bearing include:
Removed door, pulled out old hinge bearing and replaced with new one. Read more
The Control Board is an OEM replacement part for Frigidaire refrigerators. This component serves as the brain of the appliance, managing and coordinating various functions such as temperature control, defrost cycles, and the operation of fans and compressors. A functional control board ensures the refrigerator maintains optimal performance and energy efficiency.
Control boards can fail due to power surges, electrical issues, or normal wear over time. A malfunctioning board can disrupt the refrigerator's functionality and impact its ability to preserve food effectively.
Symptoms of a bad control board include:
I watched YouTube videos for two days. I figured out it was the inverter board.I replaced the inverter board and it worked !!! I had to buy a meter to make sure the compressor was still good before I ordered the part. Read more