Frigidaire Range Touch Pad

The Overlay is an OEM part for Frigidaire ranges. The overlay protects the touch controls from accidental scratches, spills, and other damage while maintaining tactile button functionality.

Causes of a bad overlay include scratched or bubbled surfaces from cleaning chemicals or improper cleaning methods. Peeling or partial removal of the overlay layers can also occur from repeated use over time or accidental impact.

Symptoms of a bad overlay include:

• Unresponsive or intermittent touch controls
• Visible scratches, cracks, or chips in the overlay surface
• Peeling or lifting of the edge seals
• Discolored or stained appearance

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is a control panel overlay for the electronic oven control on select ranges and wall ovens. It restores clear, readable button labels and refreshes the panel appearance while shielding the control face from everyday wear.

• Provides printed legends/icons for clock, timer, and oven functions
• Adheres to the EOC face to protect it from splashes and cleaning abrasion
• Use when the original overlay is faded, peeling, bubbled, cracked, or illegible
• Model-specific layout ensures the correct key positions and markings

• Disconnect power to the appliance before beginning any disassembly
• Remove the control panel/trim to access the old overlay; retain all hardware
• Carefully peel off the old overlay and clean residual adhesive; allow the surface to dry completely
• Align the new overlay with the display and key openings and apply evenly to avoid bubbles

The Overlay is an OEM part for Frigidaire ranges. It is a cosmetic component that covers and protects the control panel of the range. With a scratch-resistant surface, the overlay shields control buttons and displays from wear and spills in the kitchen. 

Symptoms of a bad overlay include:  

• Cracks, peels, or missing pieces in the overlay surface
• Faded or discolored graphics that are difficult to read  
• Exposed wiring or components under a broken overlay

Causes can be normal wear and tear over time, exposure to heat from the nearby cooktop, or damage from impacts or sharp objects.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This control panel overlay restores the printed labels and icons on your range or wall oven's electronic controls. Replacing a worn or peeling overlay makes settings easy to read again without changing the keypad or control board.

• Provides the button legends and feature markings around the clock/timer or touch controls
• Refreshes the appearance of the control panel for a clean, factory look
• Helps protect the underlying keypad face from wear and smudging
• Common signs it's needed: faded or unreadable text, peeling/bubbling film, lifted edges

• Disconnect power before servicing.
• Remove the control panel as needed to access and remove the old overlay; clean the surface of all residue and dry thoroughly.
• Test-fit alignment, then peel the backing and apply gradually, pressing out air bubbles for a flat fit.
• If buttons do not respond after installation, diagnose the keypad/touchpad or electronic control; the overlay is cosmetic and provides labeling only.

This adhesive graphic overlay covers the electronic control panel, restoring clear, readable button labels and a clean, factory appearance. It helps you operate settings confidently when the original overlay becomes worn, faded, or damaged. What it does:

• Provides printed labels/icons for the electronic control's buttons and display
• Protects the control face from everyday use, spills, and cleaning
• Common symptoms: peeling edges, bubbling, cracking, discoloration, or unreadable text
• Cosmetic component; if keys don't respond, the keypad or control board may require service

• 1 adhesive control panel overlay

• Disconnect power before servicing
• Remove the control panel/EOC as needed to fully access the old overlay
• Carefully peel off the old film; remove all adhesive residue and clean the surface with isopropyl alcohol
• Test-fit alignment, then peel and apply from one edge while smoothing to avoid bubbles

This overlay is the exterior cover for the appliance's control panel, providing the labeled surface and cosmetic finish that users interact with. It restores readable button markings and protects the underlying controls from wear. What it does:

• Replaces faded, scratched, or peeled control-panel graphics so buttons and labels are visible.
• Covers and protects the underlying switch/keypad area from spills and everyday wear.
• Helps resolve user issues caused by missing or unreadable button markings.
• Restores the appliance's finished appearance when the original overlay is damaged.

• Disconnect power to the appliance before starting any work to avoid shock or injury.
• Remove any surrounding trim or bezel to access and replace the overlay.
• Handle the overlay carefully to avoid scratching the printed surface; align precisely before seating or adhering.
• If adhesive or clips are used, follow OEM instructions.

This bisque clock overlay restores the finished look of the range control panel and provides a clean face for the clock and control indicators. It replaces a cracked, faded, or missing overlay to improve appearance and readability. What it does:

• Covers and protects the clock/display area on the control panel
• Restores printed markings and a uniform finish for easier time reading
• Helps prevent dirt and debris from collecting on the clock face
• Useful when the existing overlay is cracked, discolored, or peeling

• One bisque clock overlay

• Disconnect power to the appliance before beginning any work
• Removal may require accessing or removing the control panel; follow model-specific service instructions
• Handle carefully to avoid scratching or bending the overlay during installation
• Use only manufacturer-recommended fasteners or adhesive as applicable for your model

This electronic oven timer/clock control replaces a failed timer module to restore timed cook functions and display time. It provides a direct replacement for the oven's timing and clock interface so bake/clean cycles and timed settings work reliably. What it does:

• Controls oven timing and clock display so delayed start, timed bake, and auto-shutoff functions operate correctly
• Replaces a non-working or unresponsive timer/clock assembly
• Can resolve symptoms such as no clock display, countdowns not running, or oven timers failing to start/stop cycles
• Interfaces with the oven control circuits to send start/stop timing signals

• Disconnect power to the appliance before beginning any repair to avoid electrical shock
• Installation typically requires removing the control panel and disconnecting the old timer's wiring harness and mounting hardware
• Handle the display and lens carefully to avoid scratching; confirm electrical connections are secure before reapplying power

This control panel is the exterior console assembly that houses the oven/range user interface and buttons, restoring a clean, functional front for selecting cooking modes and settings. It replaces a damaged, cracked, or non-responsive console surface. What it does

• Provides the front interface for the appliance's electronic controls and touchpads or push buttons.
• Restores tactile button operation and visual labeling when the original panel is cracked, faded, or worn.
• Helps resolve symptoms such as unresponsive or missing buttons and cosmetic damage to the console area.
• Re-establishes a secure mounting surface for control board connectors and button assemblies.

• Disconnect power to the appliance before attempting any repair to avoid electrical shock.
• Installation typically requires removing the range/oven top or console trim; keep screws and fasteners organized.
• Handle edges and any glass/painted surfaces carefully to avoid damage and cuts.

This operator control panel kit replaces a worn or damaged cooktop/oven control overlay and restores button labeling and user feedback for reliable temperature and function selection. It helps make controls readable and easier to operate. What it does:

• Replaces a cracked, faded, or unresponsive control overlay for the range/oven control area
• Restores clear button and display markings so selections are easier to read
• Helps resolve issues caused by physical damage or wear to the panel surface
• Works with the existing control electronics and mounting points to return a finished appearance

• High-level swap: remove power at the breaker and detach the appliance access panel before replacing the control panel
• Keep fasteners and brackets organized to match original positions during reassembly
• If the control assembly or electronic components are damaged, additional parts may be required
• Follow OEM service manual steps for safe disconnection and reconnection of any wiring

This control panel is the exterior front console that houses a range's user controls and protects the underlying electronics for reliable operation and a clean appearance. What it does:

• Provides the user interface surface for buttons, touchpads, and displays
• Protects control electronics from spills, grease, and physical damage
• Supports secure mounting of switches, knobs, and display modules
• Restores a finished appearance when the original panel is cracked, scratched, or damaged

• Disconnect power to the appliance before starting any repair to avoid shock
• Handle edges and any glass or plastic surfaces carefully to prevent injury or damage
• Installation typically requires removing trim and screws; keep fasteners organized for reassembly
• Avoid touching circuit boards and when needed.