Frigidaire Refrigerator Drawer, Shelf, Pan

The Refrigerator Freezer Drawer Assembly is an OEM replacement part for Frigidaire bottom-mount refrigerators. It provides a pull-out storage solution accessible from the bottom of the refrigerator. The drawer assembly contains the necessary components to function as a freezer compartment.

Symptoms of a bad drawer assembly include: 

• Difficulty opening or closing the drawer  
• Improper freezing or frost buildup inside
• Temperature fluctuations within the drawer
• Water or air leaks causing freezer burn on contents

Causes may be related to wear and tear over time, particularly on moving parts. Damage from overloading or other mishandling could also impair operation. 

This replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore side-by-side refrigerator models.

The Shelf Assembly is an OEM part for Frigidaire side-by-side refrigerators. It includes the glass shelf surface.

Symptoms of a bad shelf assembly can include:

• Cracked, pitted or clouded glass shelf surfaces
• Discolored, bent or loose metal support brackets  
• Shelves that no longer glide smoothly on slides
• Excessive gaps between shelf and liner walls

Causes may be normal wear and tear over time like minor chips and dings, accident damage from jars or bottles falling on shelves, or stresses from overload.

This OEM Frigidaire replacement is also compatible with some Kenmore models. 

This meat pan is the refrigerator's deli drawer. Replacing a cracked or missing bin restores smooth sliding access for meats and cheeses and helps keep the fresh food section organized.

• Creates a dedicated compartment for deli items in the fresh food section
• Slides on existing shelf rails for easy access
• Restores proper fit when the original bin is cracked, warped, or missing
• Common symptoms: broken or missing drawer, front lip cracked, drawer falls or won't slide smoothly

• Remove contents; pull the old drawer straight out from the rails
• Inspect and clean the rails; transfer any reusable parts from the old drawer if applicable
• Align the new pan on the rails and slide it fully into place
• If movement is tight, confirm the shelf cover and rails are seated and level

This carriage is the factory support piece that holds and guides the related assembly so it moves smoothly and stays properly aligned. Replacing a worn or broken carriage helps restore solid, reliable operation. What it does:

• Supports and guides the connected assembly for smooth, consistent movement
• Keeps components aligned to prevent binding, wobbling, or sagging
• Restores proper operation when the original is cracked, worn, or deformed
• Typical symptoms include sticking, uneven travel, or misalignment

• 1 carriage

• Disconnect electrical power before servicing; allow any hot surfaces to cool
• Wear cut-resistant gloves to protect hands from sharp edges
• Transfer any screws, clips, or brackets from the old carriage to the new one
• Confirm smooth movement and proper alignment before full reassembly

This door bin replaces a broken or missing refrigerator door shelf, restoring secure, organized storage for jars and bottles. It snaps into the door's molded slots to keep items stable and easy to reach. What it does:

• Creates a storage shelf on the fresh food door for condiments, jars, and small bottles
• Helps keep items upright and contained to reduce spills when the door opens/closes
• Also referred to as a door shelf or door rack in some manuals
• Replace if cracked, warped, discolored, loose, or missing end tabs
• Common symptoms: bin falls off, won't seat correctly, or reduced door storage

• 1 door bin

• Remove the old bin by lifting up and out; transfer contents before removal
• Align the new bin with the correct door slots and press down until it locks in place
• Handle plastic carefully; allow part to reach room temperature to prevent cracking
• Unplug the appliance if removing additional door components or as directed by your model's instructions

This replacement door bin mounts on the inside of your refrigerator door to hold bottles, jars, and condiments. Replacing a cracked or loose bin restores safe, usable storage and helps keep items organized and accessible.

• Provides storage on the door to keep bottles and jars upright
• Restores capacity when the original bin is cracked, warped, or missing
• Helps prevent items from tipping or falling when the door opens/closes
• Common symptoms: bin falls off, won't stay seated, or has broken tabs/cracks

What's included: 1 door bin Install notes:

• Remove all items from the old bin; lift straight up to release from the door slots
• Align the new bin's tabs with the slots and press down until fully seated
• Do not force; re-align if resistance is felt to avoid damaging the door liner
• Place in the correct door position for your model; some bins aren't interchangeable between levels

This sliding basket replaces a damaged or missing freezer drawer basket to restore organized, pull-out storage and easier access to frozen items. It provides stable support for stored food and helps keep contents contained while sliding. What it does:

• Provides pull-out storage and organization for frozen foods.
• Restores drawer function when the original basket is cracked, broken, missing, or catches.
• Keeps items contained and easier to reach than loose stacking on shelves.
• Improves visibility and access to stored frozen goods.

• Always unplug the appliance and remove food/ice before starting any repair.
• Remove the old basket per the appliance service instructions and slide the replacement into the existing rails.
• Basic hand tools may be needed; retain original clips or fasteners if present.
• Verify fit by part number and appliance model before installation.

The Glide is an OEM part for Frigidaire ranges. It ensures smooth movement of the storage drawer, allowing you to easily access and organize your stored items.

A bad glide can be caused by wear and tear, damage, or lack of lubrication. Signs of a faulty glide include a sticky or jammed drawer, uneven sliding, or a drawer that doesn't close properly.

Symptoms of a bad glide can include:

• Difficulty in opening or closing the storage drawer.
• Uneven or jerky sliding motion of the drawer.
• Drawer getting stuck or not fully closing.

Replace your worn-out or damaged glide with this genuine OEM part to restore movement to your range's storage drawer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This support is the structural piece that holds and aligns a shelf, rack, or panel within your appliance. Replacing a worn or broken support restores proper fit and stability to prevent wobble, sagging, and related damage. What it does:

• Provides stable mounting and positioning for the associated shelf, rack, or component
• Helps maintain alignment so parts sit or slide correctly
• Replace if cracked, deformed, loose, or missing
• Symptoms can include a component that sits unevenly, drops, or won't stay in place

• Includes 1 support

• Disconnect power to the appliance before servicing
• Allow any hot surfaces to cool; wear cut-resistant gloves
• Note the orientation of the original part; reuse existing fasteners if applicable
• Ensure the support is fully seated and secure before returning the appliance to use

This replacement crisper pan sits beneath the refrigerator crisper drawer to catch spills and support stored produce, helping keep the drawer area clean and stable. Fits as the OEM service part for compatible Frigidaire units. What it does:

• Supports the crisper drawer and helps keep fruits and vegetables stable.
• Collects spills and juices to prevent them from dripping into the cabinet below.
• Restores proper drawer seating when a cracked or warped pan prevents full engagement.
• Helps maintain a cleaner, more sanitary drawer area.

• Remove stored food and slide the crisper drawer out to access the pan.
• Lift or unclip the old pan per your refrigerator's service instructions and slide the replacement into the same position.
• Handle carefully and inspect mating rails and seals; replace any damaged hardware before reassembly.
• No special tools required for most models; wear gloves if removing a cracked pan.

Removable silverware basket for the dishwasher lower rack that keeps forks, knives and spoons separated and upright during wash cycles, helping prevent items from shifting, nesting, or blocking spray for better cleaning results. What it does:

• Holds cutlery and small utensils securely to improve wash coverage and reduce nesting.
• Keeps sharp items contained to help protect dishes and reduce movement during cycles.
• Replaces cracked, broken, or missing baskets that allow silverware to fall through the rack.
• Easy to clean—simply rinse or place in the dishwasher top rack if needed.

• Typically installs without tools: slide out the lower rack and set the basket into the designated rack area.
• Ensure the basket is oriented correctly and does not obstruct rack travel or spray arms before running a cycle.
• Inspect surrounding rack tines and clips for damage while replacing the basket.
• Refer to the appliance owner's manual or service guide for model-specific instructions and safety information.

The Crisper Pan is an OEM part for Frigidaire bottom-mount refrigerators. Located in the crisper drawer, this removable pan collects moisture to prevent vegetables from becoming dry or wilted. Its inset design allows for organized storage of fruits and veggies.

Causes of failure can be cracks or breaks from weight of stacked items. Normal wear over time may also compromise the seal. 

Symptoms of a faulty crisper pan include:

• Excess moisture collecting in the bottom of the crisper drawer  
• Produce drying out or wilting more quickly
• Ill-fitting or loose crisper pan that slides around 

This OEM pan is also compatible with Electrolux, KitchenAid, and select Kenmore models.

This right-hand support is a small interior bracket used in select refrigerators to secure and stabilize the matching component on the right side. Replacing a cracked or missing support helps keep shelves and covers level and in place.

• Provides right-side support and alignment for the associated interior component
• Helps keep shelves/covers stable; prevents wobble, sagging, or unexpected drop
• Common signs of failure: broken tabs, cracked plastic, loose fit, or a missing support
• Replace if damaged from impact, overloading, or age

• Unplug the refrigerator and remove items to access the area
• Remove the related shelf/cover and retain any screws or clips
• Transfer and reuse the original mounting hardware if required
• Align the new support in the same orientation; secure firmly and confirm level before reassembly