Frigidaire Refrigerator Control Board

The Main Power Board is an OEM part for Frigidaire refrigerators. This board controls and manages the primary functions of the refrigerator, including temperature regulation, defrost cycles, and the operation of other electronic components. It serves as the central hub that ensures the appliance runs efficiently and effectively.

Causes of a bad power board can include electrical surges, overheating, or component wear over time. Exposure to moisture or accidental impact can also damage the board, leading to operational issues.

Symptoms of a bad Main Power Board include:

• The refrigerator not cooling or freezing properly
• Intermittent or complete loss of power
• Error codes displayed on the control panel
• The refrigerator running continuously without cycling off

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The User Control and Display Board is an OEM part for Frigidaire refrigerators. This part provides the interface for setting temperatures and controlling various functions of the refrigerator, displaying information like temperature settings, and error codes.

Common causes of a bad control and display board include electrical surges, wear and tear of electronic components, or damage from moisture or heat exposure.

Symptoms of a bad User Control and Display Board include:

• The display not lighting up or showing incorrect information
• Buttons not responding to inputs
• Inability to change temperature settings
• Error codes or malfunctioning indicators on the display

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This refrigerator control board is the central electronic module that manages key appliance functions for consistent temperatures and dependable operation. A failed board can cause no-cool conditions, unstable temperatures, or unresponsive controls; replacing it restores proper function. What it does:

• Interprets inputs from temperature sensors and user settings to run the appliance correctly
• Distributes power to components through relays and connectors
• Coordinates cooling and, on applicable models, defrost and fan operations
• Common failure signs can include no or intermittent cooling, warm temperatures, frost buildup, clicking from the control area, or unresponsive controls

• 1 control board

• Disconnect power to the refrigerator before servicing
• Use ESD precautions; handle the board by the edges only
• Photograph wiring; move connectors one at a time, ensuring keyed orientation and full seating
• After reassembly, restore power and allow up to 24 hours for temperatures to stabilize

The Defrost Control Board is an OEM part for Frigidaire refrigerators. This board manages the defrost cycle by controlling the activation of the defrost heater and the monitoring of the freezer's temperature. 

Over time, the defrost control board can fail due to electrical issues, wear from continuous use, or damage from power surges. 

Symptoms of a bad defrost control board include:

• Excessive frost buildup in the freezer compartment
• The refrigerator not cooling properly
• The defrost heater not activating
• Frequent cycling on and off of the refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Electronic Control Board is an OEM replacement part for Frigidaire freezers. It functions to operate all freezer systems and components through electronic programming and input received from sensors. 

Causes of a failed control board can include moisture damage impairing circuitry over time, power surges disrupting electronics, or logic and memory failures.

Symptoms of a problematic control include:

• The freezer failing to cool or freeze properly
• Lights or other features not functioning as expected
• Error codes appearing regarding control faults  
• Sensors and components not responding to control signals

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This compressor inverter control board powers and regulates the variable-speed compressor in your refrigerator by converting household AC into the controlled output the compressor needs. Replacing a failed inverter can restore compressor operation and normal cooling performance.

• Receives commands from the main control to vary compressor speed for efficient, steady cooling
• Converts AC line voltage to the controlled output required by the compressor motor
• Common symptoms of failure: refrigerator warm, compressor not running while fans/lights operate
• May also present as intermittent cooling, clicking or humming near the compressor, or visible damage on the module

• Disconnect power before servicing; this is a high-voltage component mounted at the compressor
• Note wire positions and transfer connectors one at a time; ensure all connections are fully seated
• Secure the module to the original mounting to maintain proper heat dissipation and vibration control

This main power control board is the appliance's central electronic module. It routes incoming power and coordinates key functions so the unit powers up, runs, and responds to controls as designed, restoring reliable operation when the original board fails. What it does:

• Distributes and regulates power to motors, valves, and other loads
• Processes inputs from sensors and user controls, switching relays/triacs accordingly
• Coordinates start-up and run cycles for consistent performance
• Typical symptoms include a dead/unresponsive unit, intermittent shutoffs, specific components not running, or visible heat damage on the board

• 1 main power control board

• Disconnect power before servicing; discharge any capacitors where applicable
• Use ESD protection and handle the board by the edges
• Photograph/label all connectors; transfer any jumpers or settings from the old board to the same positions if present
• Inspect wiring and connected components for shorts before restoring power

This main power control board assembly is the unit's central electronics module. It routes incoming power and coordinates the compressor, fan, and other loads so operation stays responsive and reliable when the original board fails from age, heat, or electrical surges.

• Distributes power to major components
• Interprets signals from the user interface and sensors to control operation
• Switches onboard relays and manages safety/logic for start-up and cycling
• Common symptoms include no power/display, unresponsive controls, won't start, runs but won't cool/dehumidify, or intermittent shutdowns

• Disconnect power and allow any capacitors to discharge before servicing.
• Access the electronics compartment; note wire locations and transfer connectors to the new board one at a time.
• Use ESD precautions; handle by edges and avoid flexing the board.
• Confirm all plugs are fully seated and reassemble before restoring power.

This main power control board assembly is the refrigerator's central controller. It manages power to the compressor, fans, and defrost system so the unit cools consistently and responds correctly to temperature settings.

• Distributes and regulates power to the compressor, condenser/evaporator fans, and defrost components
• Processes inputs from temperature sensors and the user interface to coordinate cooling cycles
• Common symptoms it may address: not cooling or intermittent cooling, fans/compressor not running, unit won't defrost/ice buildup
• May also help with unresponsive controls or repeated clicking/buzzing from the control area

• Disconnect power before servicing; handle the board by the edges and use ESD protection
• Access location varies by model; typically mounted in a rear control compartment behind an access cover
• Photograph wiring and move connectors one at a time to the new board; ensure all locking tabs are fully seated
• Reinstall covers, restore power, and verify compressor/fans operate and cooling resumes

The Dispenser Control Board is an OEM part for Frigidaire refrigerators featuring interior dispensers. It oversees dispensing of ice and water according to user selection. Located within the refrigerator door panel, it activates motors and solenoids.

Symptoms of a bad dispenser control board include:  

• Inability to dispense ice or water from lever/button
• Dispenser motors or solenoids not activating properly   
• Unresponsive or stuck dispenser lights and selection buttons
• Water or ice volumes not measured accurately

Causes can be long-term moisture exposure degrading circuitry or power surges overloading sensitive components. Proper drying and periodic cleaning help prevent issues.

This genuine OEM control board is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

This refrigerator electronic control board manages key cooling and defrost functions. Replacing a failed board helps restore accurate temperature regulation and responsive operation so the appliance runs as designed.

• Regulates compressor and fan operation based on temperature sensor inputs
• Controls the automatic defrost cycle to prevent frost buildup
• Coordinates signals to the user controls/display and other components
• Common failure symptoms: not cooling or intermittent cooling, unit won't run, excessive frost/ice, unresponsive or erratic controls

• Disconnect power to the appliance before service
• Use anti-static precautions; handle the board by the edges only
• Photograph wiring; move connectors one at a time to the matching terminals on the new board
• Ensure all connectors are fully seated before reassembly and testing

This dispenser module controls the refrigerator's ice and water dispensing functions and user interface. Replace a failed module to restore responsive dispensing, indicator lights, and consistent operation at the dispenser.

• Interprets button/paddle inputs and manages dispenser functions
• Coordinates ice and water dispensing operations
• Controls dispenser indicator lights/display for user feedback
• Failure can cause no dispense, unresponsive controls, or erratic/loss of lights

• Disconnect power and shut off water supply before service
• Remove the dispenser trim/panel carefully to access the module; protect against static discharge
• Note wire positions; transfer connectors and any reusable covers/overlays from the original part if applicable
• Restore power and test ice and water dispensing after installation

This is a refrigerator control board. It makes sure all the appliance processes run as expected. It links up with other internal parts to ensure the correct level of cooling. The part is made of durable materials and includes a small display. This offers information to users about the current temperature inside the refrigerator. The screen can crack or internal parts of the control board can become damaged. This can cause the refrigerator to stop cooling or running entirely.If the control board is damaged or not working correctly, it should be replaced. First, access the back of the appliance and unplug it from the wall. Remove the screws that hold on the cover to work with the control board. Make notes about where the wires are connected before removing the board. The new replacement part should have the wires reconnected in the same locations. Replace the cover and turn the power back on.The control board is compatible with several refrigerators made by Frigidaire. It is sold on an individual basis and sourced directly from the manufacturer. This is a genuine OEM replacement component.

Replace a failed refrigerator control board to restore dependable operation. This electronic board supplies the logic and switching for the features it manages, helping eliminate intermittent or unresponsive behavior and returning the appliance to consistent, predictable performance.

• Interprets inputs from sensors and switches, then controls connected components through onboard relays
• Coordinates timing and operation of the functions this board manages
• Can correct erratic cycling or unexpected shutdown of controlled functions

• Disconnect power to the refrigerator before servicing
• Use ESD protection; handle the board by the edges and avoid touching components
• Access location varies by model; transfer connectors one at a time to the new board and secure in the original mounting
• Restore power and allow the unit time to resume normal operation

The Inverter Board is an OEM component for Frigidaire side-by-side refrigerators. As the main processing module, this board oversees all cooling functions through electronic control. It regulates temperatures, defrost cycles, and diagnostic alerts.

Causes of failure involve water intrusion degrading circuits over years, along with individual electronic parts stress-worn from prolonged daily use. Insufficient ventilation traps too much heat around delicate components.

Symptoms consist of:

• Cooling and freezer compartments failing to reach set temperatures
• Defrost issues causing ice buildup  
• Error codes or fault messages appear frequently
• Complete cooling failure and inability to power refrigeration 

This Frigidaire OEM replacement is compatible with select models from Frigidaire, Electrolux, and Sears/Kenmore models utilizing the same system design.

The Dispenser Control Board is an OEM replacement part for Frigidaire refrigerators. This component manages the operation of the ice and water dispenser, controlling functions like dispensing ice, water, and the corresponding display settings. It ensures that the dispenser operates correctly by communicating with other components, such as the ice maker and water valve.

Causes of a bad dispenser control board can include electrical malfunctions, power surges, or wear from regular use, which can affect the board’s ability to send signals to the dispenser components.

Symptoms of a bad dispenser control board include:

• Ice or water not dispensing properly
• Display or indicator lights not functioning
• Dispenser buttons unresponsive
• Intermittent or complete dispenser failure

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.