Frigidaire Refrigerator Control Board

A replacement PUR-BETA control module that restores control for the refrigerator's PUR water/dispense/filter functions so the dispenser, filter status and related signals operate properly. What it does:

• Manages electronic signals for the PUR filtration and dispenser circuitry
• Communicates filter status and reset information to the fridge control system
• Controls/coordinates water and dispenser-related functions tied to the PUR system
• Common symptoms of a failing module include unresponsive water/ice dispenser, persistent filter-status light, or intermittent dispenser operation

• Always disconnect power (and water supply when applicable) before servicing to avoid shock or water damage
• Handle the module carefully and avoid static discharge; use a grounded wrist strap if available
• Some panel removal and connector unplugging is required; keep track of screws and connectors

This control assembly is the console electronics that manage the oven/range user interface, display and temperature control. Replacing a faulty control restores responsive keys, accurate displays and reliable oven operation. What it does:

• Regulates oven temperature and cooking cycles via the console electronics.
• Provides the front display, clock and touch/keypad input processing.
• Can resolve symptoms like unresponsive buttons, blank or erratic display, or oven not starting.
• Works with the range/oven's wiring harness and sensors to execute user commands.

• Disconnect power at the breaker or unplug the appliance before beginning work.
• Protect the PCB from static: handle by edges and avoid touching circuitry.
• Verify wire connections match the original harness before powering on.

This inverter is the compressor control module that converts incoming power and regulates motor speed for variable-speed compressors, helping the fridge maintain consistent temperatures and energy-efficient cooling. What it does:

• Supplies and converts power to the compressor motor so the compressor runs at variable speeds
• Regulates compressor speed to maintain steady cooling and reduce temperature swings
• Can cause the compressor not to run or intermittent cooling when faulty
• Fault symptoms may include error codes, fridge not cooling, or unusual compressor behavior/noise

• One inverter (compressor control) module

• Disconnect power to the appliance before starting to avoid shock
• Handle the board carefully and avoid static discharge; use ESD protection if available
• Verify the replacement PN and wiring match the original before connecting

This is a refrigerator control board. The function of the control board is to effectively control all of the refrigerator's functions. These functions could include cooling the fridge, defrosting, dispensing, and even lighting.In the event that any of the functions of the refrigerator stop working correctly, the control board could be the culprit. If the buttons on the unit are pressed and nothing happens, it's likely that the control board is faulty. For example, the refrigerator may not be cooling, defrosting, the lights might not work, or the ice and water will not dispense. If this is the case, this is a high-quality replacement part. Make sure to unplug the refrigerator from the electrical outlet before replacing this part. This specific control board is compatible with refrigerators that are manufactured by the Frigidaire and Crosley brands. It is sold individually and sourced straight from the manufacturer.

This board-switch is an electronic control component that operates user-selected functions and sends signals to the appliance's control system. Replacing a faulty switch restores reliable input response and control of affected cycles or settings. What it does:

• Acts as the user-input switch assembly that tells the control board which functions or cycles to start
• Commonly linked to unresponsive buttons, no-start conditions, or intermittent control behavior
• Helps restore accurate command signaling when worn or damaged contacts fail to register presses
• Works as part of the appliance's front control/interface; does not include main control board unless specified

• One board-switch assembly as shown

• Disconnect power to the appliance before attempting any service to avoid shock or injury
• Handle the board and connector pins carefully; avoid touching contacts or static-sensitive components
• Minor disassembly of the console or control panel is typically required; keep fasteners and hardware organized

Instructions are no longer included with this part. See Resource Team for instructions.

This electronic console control replaces a failed or unresponsive control module so your appliance can send and receive commands reliably. It restores user input and cycle control for normal operation. What it does:

• Serves as the main control interface to manage cycles, timing, and functions
• Interprets button/knob inputs and sends signals to motors, valves, and heaters
• Prevents erratic behavior caused by failed or damaged control electronics
• Commonly used when displays, lights, or cycle selection stop responding

• One electronic console control module

• Disconnect power before attempting replacement to avoid shock or damage
• Handle the board by edges; avoid touching electronic components or solder joints
• Check connectors for proper seating and secure mounting per service manual

This board-switch is the user control/selector module that sends settings signals to an appliance's control system, restoring reliable selection of cook or cycle options and user-input functions. What it does

• Acts as the selector/control interface that registers knob or button selections and sends corresponding signals to the main control
• Re-establishes lost or intermittent selection responses when worn contacts or a failed switch board prevent input recognition
• Can fix symptoms such as unresponsive selector buttons/knobs, inability to change cycles or modes, or intermittent control inputs
• Works as the electrical switching/selector component rather than a full electronic control board

• One board-switch assembly as shown

• High-level replacement: power must be disconnected at the breaker or plug before access and replacement
• Handle the board by edges; avoid contact with components and use anti-static precautions if possible
• Installation may require removal of the control console or panel and basic hand tools; keep screws and connectors organized

This replacement board-switch is the electronic control that manages user inputs and basic appliance functions, restoring reliable response from the control panel. Use it to replace a faulty board causing unresponsive or erratic controls. What it does:

• Routes user inputs to the appliance's control system so buttons, knobs or touchpads register correctly.
• Activates internal relays/outputs that initiate functions; failure can cause controls to be unresponsive or commands not to execute.
• Helps stop intermittent or erratic behavior caused by a damaged or corroded control board.
• Resolves symptoms such as non-working control buttons, blank or flickering display, or inconsistent function selection.

• Always disconnect power at the breaker or unplug the appliance before starting work to avoid shock.
• Handle the board by its edges and avoid touching components; use an anti-static strap if available.
• Keep track of screws and wire connections; label or photograph harness locations before removal for correct reassembly.

This part is a dispenser control board designed for Frigidaire refrigerators. The control board regulates the water and ice dispenser, allowing users to control whether ice is cubed or crushed, and turning the light on or off. Over time, the control board may be exposed to moisture, causing it to corrode and fail. Exposure to excessive heat can also lead to damage.Signs that the dispenser control board may need to be replaced include none of the dispenser functions operating, or dispenser functions operating inconsistently or intermittently. If erroneous operation is noticed, users will need to replace the dispenser control board. This will require a flathead screw driver to pry the panel off the front. The control board should be visible underneath. Disconnect the wires, taking note of their location and orientation, and then remove the board. Install the new one, replace the wires, and then replace the cover.This genuine OEM part is sold individually. It is compatible with Frigidaire, Kenmore, and Crosley models.

This power control board is the refrigerator's main electronic control that manages power distribution and system functions so the appliance runs reliably and responds to user settings. What it does:

• Supplies and regulates power to compressor, fans, lights and other subsystems
• Processes input from the user interface and sensors to control cooling cycles
• Helps protect against erratic operation by coordinating start/stop functions
• Common symptom fixes: unit won't power on, intermittent operation, lights or fans not running, or failure to start cooling

• Disconnect all power to the appliance before starting work
• Handle the board by its edges and avoid static discharge; wear an anti-static wrist strap if available
• Verify connector alignment and seating; do not force pins or connectors

A switch board that houses the control buttons and selector interface, restoring responsive input and cycle selection so your appliance accepts commands and starts cycles as expected. What it does:

• Replaces the user-interface board that registers button presses and selector inputs
• Fixes symptoms like unresponsive buttons, selector not engaging, or inability to change settings
• Restores reliable communication between the front controls and the appliance control system
• Helps recover normal control operation when the display and panel otherwise appear intact

• Disconnect power to the appliance before beginning any repair
• Handle the board carefully; avoid static discharge by grounding yourself
• Reconnect all wiring harnesses and mounting hardware securely during reassembly