Need Help?
Call
Replacement door handle kit for top-mount refrigerators. Includes handle and mounting hardware. Restores cracked, broken, or damaged handles on fridge doors.
I ordered a replacement handle and screws. The process was very easy with the help of one of your "pros" who found all the parts needed and took my order. I didn't realize I was getting both a refrigerator door handle and a freezer door handle in one set, but now we have the freezer handle if we need it. Removing the old handle and installing the replacement was very easy. It looks great, in fact the replacement is metal, whereas the original was plastic, so it looks better than it ever did! Read more
Magnetic freezer door gasket seals the perimeter to keep cold air in and moisture out. Replace when torn, pulling away, or causing frost buildup.
Based on my model # and serial # the Appliance Parts Pros were able to quickly find and ship the gaskets I needed. The instructional videos showed me how to remove the old and replace with the new. I was able to easily do it myself. Read more
Storage bin that mounts inside refrigerator door for condiments, beverages, and jars. Replace if cracked, broken, or missing from fresh food compartment.
We replace them I order wed moring and I got Thursday afternoon I was very happy got them quick Read more
Replace your cracked or broken refrigerator crisper drawer to properly store fruits and vegetables. Direct fit installation—just slide into place. Easy DIY.
Just slide in it Read more
Fix a fridge that's not cooling or making loud airplane-like noises. This condenser fan motor kit circulates air through coils. 30min-2hr DIY install.
FIrst, I removed the cardboard cover on the back, exposing the compressor compartment. I noticed the fan was not moving. I touched the blade and it immediately started spinning, but not very fast. The compressor was getting hot, and I think prob. overheating. The fan stopped after a few hours and then "froze" solid the next day. I got the parts and I followed the process in the video to replace the fan. VIdeo was right on the money. but there were some difficulties. The retention clip on the... Read more
This 26.7" shelf assembly replaces a damaged or missing refrigerator shelf so you can organize food safely and restore usable storage space. Built to sit on existing shelf supports and hold everyday refrigerator items. What it does:
Put in a shelf Read more
Seals refrigerator door to prevent air leaks and maintain temperature. Replace if torn, cracked, or causing frost buildup. Verify fit with your model.
Purchased new gasket from your site. Watched the video for how to change it.Took about 15 min. to remove the old one and install the new one. Read more
The Door switch is an OEM replacement part for Frigidaire refrigerators. This part turns the light on/off as the door opens and closes. Causes of a faulty door switch include normal wear of electrical contacts from repetitive on/off cycles. Moisture exposure may potentially corrode internal connections. Symptoms of a bad light/switch include:
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
REPLACED THE LIGHT/LAMP SWITCH. Read more
Replacement door rack support for refrigerator door bins. Secures door shelves to the refrigerator door. Replace if cracked, broken, or missing.
Put racks to together and put into fridge Read more
Rubber seal for the ice dispenser door on side-by-side refrigerators. Replaces cracked, worn, or missing seals that allow warm air into the freezer.
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more
Replace your broken or cracked refrigerator glass shelf insert. This transparent tempered glass surface slides into the existing shelf frame for easy installation.
Replace them. Out of two shelf guards 1 was broken Read more
This triple-solenoid water inlet valve controls water flow to the ice maker and water dispenser in Frigidaire and Electrolux side-by-side and French door refrigerators. If the ice maker has stopped producing ice, water is leaking from the back of the refrigerator, or the dispenser has low or no water flow, a failed water inlet valve is a common cause. The valve requires at least 20 psi of water pressure to close properly - if pressure is adequate and the valve still leaks or fails to supply water, the valve itself is likely defective and should be replaced. Disconnect water supply and unplug the refrigerator before installation. Note the positions of the color-coded water lines before removing the old valve, and confirm all push-connect fittings are fully seated with retention clips in place after installing the new one.
I replaced it. Read more
Fixes excessive ice buildup on evaporator coils and freezer not defrosting properly. This defrost thermostat kit restores proper defrost cycles.
Replaced the defrost thermostat in freezer and fridge and the defrost heater in freezer. These guys had my parts in stock and I got them in 2 days Read more
Seals your freezer door to prevent warm air entry and ice buildup. Replace if door won't close tightly or frost forms around edges. Verify fit with your model.
Replaced the gasket. Five minute repair after door removal. Working great now. Read more
Ice dispenser not working or auger spinning but no ice comes out? The dispenser drum often cracks or wears out. Moderately easy DIY fix with video guide.
Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more
White plastic bar that secures bottles and jars on your refrigerator door shelf. Replace if cracked, broken, or missing. May require cutting to fit.
I replaced the bar and rack support. It was fairly easy. I measured the shelf and cut the bar to size. Then I inserted the bar into the shelf support and the inserted the bar and supports into the slots on the left and right. Thanks Appliance Pros for the fast delivery and the exact items that were ordered. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.