This plunger switch is the push-style electrical switch that completes a circuit when an actuator is depressed, restoring reliable on/off signaling. Use it to replace a worn or broken plunger switch that causes intermittent or non-responsive operation. What it does:
- Closes an electrical circuit when the plunger is pushed, sending a signal to the appliance control.
- Commonly used where a door, lever or dispenser actuator must register a position or user input.
- Can correct symptoms like intermittent operation, a dispenser or mechanism that won't activate, or a stuck/unresponsive actuator.
- Acts as a direct mechanical-to-electrical interface—no electronics required.
What's included: One plunger switch. Install notes:
- Disconnect power (unplug or turn off breaker) before servicing to avoid shock.
- Remove the access panel or housing to reach the switch; note actuator orientation before removal.
- Disconnect terminals or harness, then swap the old switch for the new one; reconnect terminals securely.
- Test the plunger action and appliance function before reinstalling panels.
Do-It-Yourself Stories from Customers like You
Light was stuck on because switch was bad Brian F. • Clinton , NY • October 10, 2015
I pulled the switch out of the oven console and wiggled it until it started working. That only worked for a few days. I ordered the new switch from AppliancePartsPros on Monday. In the mean time, I pulled the switch off and held the wiring harness in place with duct tape. This turned off the light. Two days later, I plugged in the replacement switch, pushed it into the console and the rest is history! Thank you AppliancePartsPros!
Read more