General Electric Range Parts

Took top apart to find out that the problem was just the lens for the light was broken. Come to find out that the lens is what holds the light in place. When the lens broke the light fell down into the base of the cooktop. I bought a light and lens but for the price I could not go wrong. I cannot believe how fast and easy my order was handled!! Awesome company Read more

• Little to no heat when baking
• Won't start
• Gas igniter glows, but will not light

I put in a new igniter. Very simple Read more

The oven was so loud, it was hard to talk to someone in the kitchen. We replaced the motor and the fan blade. 1. Turn off power to the oven. 2. Remove the oven doors 3. Remove the cover for the fan. 4. Turn the fan blade nut clockwise to loosen( it's opposite of normal) - Save the nut and the small clip that is behind the fan as you'll need them again. 5. Remove the screws that hold oven to the kitchen cabinet frame. 6. Slide oven out of kitchen cabinet and place on the floor - it takes 2... Read more

• Door won't close

Ordered new part & snapped into place. Read more

I lifted up the door and removed it. Next, I laid out newspaper on the floor. I placed the door on the newspaper upside down. With my socket driver, I removed the bottom door trim. I then used a pocket knife to remove the remaining glass in the top groove. I then slid in the new glass and reinstalled the trim. It took 30 minutes to replace the glass and clean up the glass fragments from the previous door glass. I looked up a video on how to replace it Utube. Personal safety equipment - Safety... Read more

I examined the inner burner heads and determined that two of the most frequently used burners were warped and were not making good contact with the burner base. It's a GE Profile series stove about 10 -12 years old. I checked the GE Parts website, and they wanted almost $100 for the large burner head but didn't even have the small one at all, saying it was no longer available. By Googling the parts numbers, I found Appliance Part Pros, and they had both burner heads available. They were still a... Read more

I surfed the Web on " How to repair glass top stove burner that wouldn't heat". I found out how and what to check for a problem with the element.I found what I needed to know and how to trouble shoot.This was easier to repair than I thought it would be. Read more

Purchased a replacement handle. Read more

Replaced spark module and all electrodes/igniters. Read more

I replaced a burner and it worked fine. Read more

APP Tech & Sales staff helped me diagnose the problem, we agreed that it was "most likely" the Safety Valve. It arrived the next day and I just installed it.BINGO! Just in time.My reward is my wife's awesome Christmas cookies. It was reassuring to know that I could return the part if it didn't solve the problem especially since I had already wasted money on a misdiagnosed part from another supplier that doesn't accept returns. I'm not too handy and you have to take the door off and a bunch of... Read more

Worst part of job was sliding stove out from wall. Remove 4 small screws from shield on top of stove, disconnect two connectors from switch rocker, push lock tabs inward so you can push switch rocker outward from back toward burners threw frame of stove, insert new unit until click locks, reconnect wires, and reinsert shield back on top stove and secure with 4 screws removed earlier. Easy job, part shipped from AppliancePartsPros.com Fedex ASAP. Read more

Bought black ones to replace them. They look great and match the black burner grates and pans I had bought previously. Good service from you. Read more

The part was sent so fast we had it fixed right away. Very easy to repair. Read more

Very easy fix. Turned of power at breaker. Removed oven door by lowering two "keepers" on the hinges for the oven door and sliding the door out of the oven. Removed the trim plate at bottom of oven by pushing it up.. Removed 2 screws that mount to the frame of the cabinet at the bottom that the trim plate hangs from. Then removed 4 screws that hold the oven into the cabinet at either side of the oven. Put two 5 gallon buckets in front of the oven and slid the oven out onto the side-by-side... Read more

Burners were an exact match for the originals and the pans fit perfectly. Vastly improved the appearance of an old cook top and allowed us to to not have to replace it before our home goes up for sale. Read more