Gibson Parts

Removed top hinge then removed door. Replaced hinge closure cam and bearing. Read more

I replaced the thermostat and knob and the oven was working properly. I saved about $25.00 by ordering the parts from your company over a local store. Read more

Ordered the screws needed from your website and put the doors back on the frig. Read more

Shelving went in without a problem. Very simple. Checked the installation video anyway in case there was a trick to not breaking something. Learned that the nylon clips needed to be transferred and found one missing on another shelf, so ordered a replacement. The water valve was one I replaced some time ago but one of the solenoids was bad, confirmed with a meter (ohm reading is between 200-500; less than 200 or more than 500 is broken). Replaced it without a problem (becoming expert at... Read more

Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more

Frigidaire Gallery gas dryer from maybe 15 years ago. Based on the fact the the smell was only in the dryer, I concluded it must be the gas valve failing to completely seal when closed. After looking at the insides again, I suppose it is possible that it was a connection near the burner, but that stuff had remained untouched for 10 years so I still think I made a good assumption. I got a new ignitor as well since I was in there, and compared to the valve, it was cheap! I thought I could get in... Read more

Read the reviews on your site and watched your video and decided it was worth a try to fix rather than to replace stove. Ordered the igniter for the oven then I also ordered the igniter for the broiler as it was sluggish as well. When you go, go all the way. Only problem I had was with the wire nuts, wish that something more substantial was provided. Got the stuff quickly, as promised and installed as per video and oven and broiler work like new. Thanks!!!!! Read more

It worked good Read more

An appliance repairman came to diagnose the issue causing the burning smell and the reason the 17- year old Frigidaire freezer was not cooling. He plugged the freezer back in and it immediately flamed up revealing the failed power overload controller. He tested the controller and the attached capacitor and found they had both failed. He quoted $556 to replace the failed parts to resolve the issue. We initially decided the replace the whole freezer given its age, but due to the China virus,... Read more

I tore into the washer until i found what i thought was the problem which was the upper outer tub splash cover gasket and when i couldnt find one in my town i ordered a new one from u folks and replaced it hoping for the best and was successful. This fix costed me $35 instead of the $400+ for a new washer glad i looked into it instead of discarding it and buying a new one as most may do thanks Read more

New hose and clamp. Read more

Replaced the hinge bearing and the door closer plate. The works perfectly, no more popping and it literally only took 10 minutes to do! Read more

This was a simple replacement of the crisper drawer and humidity control sliding switch; easy to snap into place and align with the tracks. Read more

Ordered parts, watched videos and had it like new in five minutes! Read more