Need Help?
Call
This is a standard fuel cap for a hedge trimmer, chainsaw, or weed eater. The fuel cap assembly goes into the tank then screws onto the top of the fuel tank. A fuel cap keeps dirt and debris from falling into the fuel tank and gunking up the engine, causing it to misfire or corrode. Fuel cap assemblies are made of plastic, so they can dry out and snap. If the rubber seal on the fuel cap assembly is no longer preventing fuel from leaking, it’s time to replace it. Installing a new fuel cap assembly is simple. Just push the stopper in and screw on the lid. This is a genuine OEM product shipped from Husqvarna, the manufacturer of this part. This part is also compatible with Craftsman and Poulan products. Part sold individually.
Usually ships within 4 - 14 days
Seals the fuel line where it passes through the chainsaw fuel tank. Replace if cracked, worn, or leaking to prevent fuel seepage and maintain proper seal.
Cleans fuel before it enters the carburetor, catching dirt and debris. Replace when clogged to restore peak engine performance and prevent starting issues.
This is a genuine replacement bolt that is designed for use with select trimmers and brush cutters. The metal hex screw is generally found on the starter cover and used to secure the cover to the trimmer to protect the internal engine components. Although the screw is durable, it can become damaged due to impact or another incident. It may also be lost in the process of other repairs or maintenance. It will need to be replaced with an OEM model like this screw for the best results. This 4x16 screw is manufactured by Shindaiwa and compatible with select machines from the brand, as well as those from Little Wonder and Echo. This metal screw is sold as an individual unit and does not include any additional parts or accessories. Replacing the starter cover screw is generally a simple task. Allow the engine to cool and disconnect the power supply. Then, use an Allen wrench to remove the old screw if it isn't already missing. Install the new screw and the job will be done. It is important to wear gloves and use the right size hex key to ensure that the screw doesn't get stripped during installation.
This variable speed pulley is a genuine MTD part, sold individually. This variable speed pulley can be used as a replacement part in a lawn mower. The purpose of a variable speed pulley in a lawn mower is to regulate and manage the speed at which the motor runs so that the speed can be kept within a stable range for the safety of the operator of the appliance.The variable speed pulley in a lawn mower might have to be replaced if the variable speed pulley can no longer properly manage the speed of the lawn mower. This could occur if the variable speed pulley suffers damage from general wear and tear with long-term use or as the result of an accidental collision with a hard object that warps the variable speed pulley beyond functionality. This replacement should be executed in accordance with the proper instructions sourced from a relevant appliance manual.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This variable speed pulley is compatible with the following outdoor appliance brands: MTD.
Headlights won't turn on or off on your lawn tractor? This headlamp switch mounts on the dash panel to control tractor headlamp operation. Easy install.
This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.
Flange bearing for lawn tractors and walk-behind mowers. Replace when you notice excessive noise, wobbling, or difficulty with blade rotation. Verify fit with your model number before ordering.
Flange bearing for lawn tractors and snow blowers. Replace if you notice excessive noise, vibration, or rough wheel rotation. Verify fit with your model.
This is the air filter element for a string trimmer engine. It prevents dirt, dust, and debris from entering the carburetor and combustion chamber, protecting internal engine components. Replace this filter if the trimmer is hard to start, runs rough, loses power, or if the filter is visibly dirty or damaged.
This genuine Echo flywheel can be used as a replacement part for string trimmers, edgers, hedge trimmers, leaf blowers, leaf vacuums, and pole saws. The purpose of the flywheel in the small engine of such outdoor appliances is to save up the momentum generated by the combustion of the engine's fuel to maintain the rotation of the crankshaft while the engine is not actively using the fuel.A flywheel might have to be replaced in the lifespan of an outdoor appliance if it exhibits symptoms of malfunction such as frequently slipping gears, a burning smell, occasional unexplained kickback, and rattling noises coming from the brake clutch. If the flywheel exhibits any of these symptoms that are directly attributable to a malfunctioning flywheel upon inspection, the flywheel should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This flywheel is compatible with the following brands: Echo and Shindaiwa.
Ignition coil assembly for outdoor power equipment. Generates spark to start the engine. Replace if cracked, corroded, or physically damaged.
Many gas-powered small engines require the use of a pull cord to get the engine going. Rather than a starter, it is the pull of the cord that causes the engine to turn over and combustion to begin inside of the engine. These pull mechanisms often use a damper spring on the starter assembly. It exists to "pre-load" a recoil or pull starter with a lot of tension. When it malfunctions, it will take a tremendous amount of effort to get the engine going. This replacement damper spring is designed for a long list of Shindaiwa and Echo machines. These include trimmers, blowers, edgers, and more. This OEM replacement part is shipped individually and made of durable metal for years of service.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.