Hotpoint Dishwasher Parts
Genuine Ge part
By: Ge
Part Number: WD49X30778
Replacement door cable and spring kit for dishwashers. Installs on door hinge to provide proper tension and balance. Needed when cables break or springs wear out.
Do-It-Yourself Stories from Customers like You
Door cable broke on dishwasher door Cindy T. • Gadsden , AL • March 23, 2020
Replaced broken part.
Read more
More
$19.36
- Compare At:
-
$23.04
- You Save:
-
$3.68
Genuine Ge part
By: Ge
Part Number: WD12X10426
Replacement end cap for dishwasher rack rails. Prevents upper or lower rack from sliding off when pulled out. Needed when cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Door latch was broken Umesh K. • Pittsburgh , PA • February 17, 2017
Turn off the power , pull dishwasher and replaced the new one . It is working now
Read more
More
$10.78
- Compare At:
-
$12.83
- You Save:
-
$2.05
Genuine Ge part
By: Ge
Part Number: WD15X10003
Dishwasher not filling with water? A faulty water inlet valve is often the cause. This valve controls water flow into your dishwasher. 20-30 minute fix.
Do-It-Yourself Stories from Customers like You
Leaky inlet valve for dishwasher Don S. • Battle Creek , MI • April 22, 2014
Removed the old one. ordered a new one from appliancepartspros.com on Thursday afternoon, had the part on my front porch by Friday afternoon and installed it the next Monday morning. After I determined the problem, actual time fixing was maybe 30 minutes.
Read more
More
$78.27
- Compare At:
-
$93.14
- You Save:
-
$14.87
Genuine Ge part
By: Ge
Part Number: WD22X10094
The Middle Conduit Assembly is an OEM part for GE dishwashers, designed to facilitate the proper routing and distribution of water during the wash cycle. This part ensures that water is evenly distributed to the middle spray arm, providing effective and efficient cleaning of dishes placed on the middle rack.
Causes of a bad middle conduit assembly can include clogs from food debris, mineral buildup from hard water, and physical damage due to regular use or improper loading of dishes. These issues can impede water flow, reducing the dishwasher’s cleaning efficiency.
Symptoms of a bad Middle Conduit Assembly include:
- Poor cleaning performance, especially with dishes on the middle rack
- Water not reaching the middle spray arm
- Unusual noise during the wash cycle, indicating a disruption in water flow
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken middle spray arm and mid conduit assembly. Tony P. • Manchester , NH • March 27, 2017
Ordered part, received it in two days. Parts were amazingly easy to install. Appliance works like new again! Thanks for a wonderful shopping (and repair) experience.
Read more
More
$30.30
- Compare At:
-
$36.06
- You Save:
-
$5.76
Genuine Ge part
By: Ge
Part Number: WD35X20994
Upper dishrack roller kit with 4 nylon rollers and 4 axles. Replace broken, cracked, or worn rollers that prevent smooth rack gliding in your dishwasher.
Do-It-Yourself Stories from Customers like You
Water was leaking from base water was not draining from tub extreme build up of mineral deposits Kateri G. • Vista , CA • September 18, 2016
Removed and cleaned all inside components of dishwasher. Replaced the sump inlet and fine filter. I decided to complete the repair myself when my appliance repairman did not want to help me. The videos from Appliance Parts Pro are AMAZING!!!! Gave me the confidence to do the repair myself (had to fully uninstall the machine and flip it over). THANK YOU!!!
Read more
More
$40.95
- Compare At:
-
$49.14
- You Save:
-
$8.19
Genuine Ge part
By: Ge
Part Number: WD13X10045
Door won't open or handle feels loose? The handle actuator links your dishwasher handle to the latch. Easy DIY repair, typically under 1 hour with video.
Do-It-Yourself Stories from Customers like You
Dishwasher stopping mid cycle and beeping Robert D. • Lincoln , NE • January 30, 2015
I got on the site and shared my issue. It was determined my door switches were bad, as well as my actuator. I ordered the parts (which arrived in just 2 days!) and I fixed it myself in just under 10 minutes, for under $30.00. Thanks guys!!!!
Read more
More
$41.56
- Compare At:
-
$49.87
- You Save:
-
$8.31
Genuine Ge part
By: Ge
Part Number: WD12X10109
Traps food particles during wash cycles to prevent recirculation and ensure spotless dishes. Replace if clogged or damaged. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Dishwasher wasn't cleaning well spots and food still attached kind of problems Terry B. • Sacramento , CA • January 31, 2017
My daughter and I went to Youtube and found an extremely well presented video on how to clean our exact make and model of dishwasher. We live in a newly rented house, new to us, not new. The dishwasher was an unholy nightmare of filth, clogged filters, calcium deposits coating and blocking in literal heaps, discovered when taken apart. The miracle really was that the dishwasher cleaned at all. We cleaned and scraped everything thoroughly, the fine filter and the sump filter as well but decided...
Read more
More
$40.35
- Compare At:
-
$47.61
- You Save:
-
$7.26
Genuine Ge part
By: Ge
Part Number: WD22X10077
Dishes coming out dirty or spotty? A clogged sump filter lets food particles recirculate. This filter traps debris for cleaner dishes. DIY install.
This part fixes the following symptoms
-
Not cleaning dishes properly
-
Will not drain
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher wasn't cleaning well spots and food still attached kind of problems Terry B. • Sacramento , CA • January 31, 2017
My daughter and I went to Youtube and found an extremely well presented video on how to clean our exact make and model of dishwasher. We live in a newly rented house, new to us, not new. The dishwasher was an unholy nightmare of filth, clogged filters, calcium deposits coating and blocking in literal heaps, discovered when taken apart. The miracle really was that the dishwasher cleaned at all. We cleaned and scraped everything thoroughly, the fine filter and the sump filter as well but decided...
Read more
More
$49.95
- Compare At:
-
$59.44
- You Save:
-
$9.49
Genuine Ge part
By: Ge
Part Number: WD8X229
The Door Gasket is an OEM part for GE dishwashers. It forms a seal between the dishwasher door and tub which is critical for proper operation. The gasket ensures excess water and moisture do not leak from the dishwasher during active wash and rinse cycles. It also helps keep noise levels low by providing sound insulation. This gasket measures 3/8 x 89 inches.
Common causes of a bad door gasket include regular wear and tear, exposure to high temperatures and detergents, or physical damage. These factors can cause the gasket to lose its flexibility and sealing capability.
Symptoms of a bad Door Gasket include:
- Water leaking from the dishwasher door
- Visible cracks, tears, or deformation in the gasket
- The door not closing properly or securely
- Increased moisture around the dishwasher during or after cycles
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water emptied out under the door of my 24 yr old GE dishwasher on to the floor. Andrea B. • Harrisburg , PA • September 22, 2018
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman".
I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it...
Read more
More
$95.49
- Compare At:
-
$115.91
- You Save:
-
$20.42
Genuine Ge part
By: Ge
Part Number: WD08X10016
Creates a watertight seal around your dishwasher door to prevent leaks during wash cycles. Replace if cracked, worn, or leaking. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Dishwarsher door gasket was worn out Richard K. • Clayton , OH • August 18, 2014
Ordered new one online. It came in 2 days with instructions. I installed it and works great.
Read more
More
$29.30
- Compare At:
-
$34.87
- You Save:
-
$5.57
Genuine Ge part
By: Ge
Part Number: WD12X10244
Secures and rotates the lower spray arm inside your dishwasher tub. Replace if the mounting tab is broken, cracked, or won't hold the spray arm securely.
Do-It-Yourself Stories from Customers like You
Broken spray arm Robert F. • Port St Lucie , FL • September 20, 2014
I did not know how to remove the broken spray arm so when I muscled it out, the spray arm base broke. We ordered the replacement parts from appliance parts pros and received them within 2 days. I looked online to find out how to remove the spray arm base. I removed it be unscrewing the base, screwing the replacement base, and then snapping in the new spray arm. We tested the dishwasher and it worked just like it was new. Another new task learned and completed!!
Read more
More
$77.76
- Compare At:
-
$91.76
- You Save:
-
$14.00
Genuine Ge part
By: Ge
Part Number: WD21X25696
If your dishwasher won't start or has no power, the control board fuse may be blown. This 4.1 amp fuse protects electronic components from overcurrent.
Do-It-Yourself Stories from Customers like You
Circuit board Michael E. • Rancho Cucamonga , CA • May 07, 2024
I had to remove the dishwasher about 6 inches then remove the door springs and remove the door.
Next was to open the cover to reach the circuit board and remove it. The new board was put in and attached the plug. and put the door back together and reinstall the door and springs. Turned the power to check that the lights came on. After confirming I again had power, I turned the breaker off and reinstalled the dishwasher in the cabinet and restored power. Lastly I ran the machine to ensure that...
Read more
More
$10.78
- Compare At:
-
$12.94
- You Save:
-
$2.16
Genuine Ge part
By: Ge
Part Number: WD16X313
Dishwasher detergent cup won't stay closed or won't open fully? This soap dispenser lever controls detergent release. DIY repair in 15 minutes.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
$24.95
- Compare At:
-
$29.44
- You Save:
-
$4.49
Genuine Ge part
By: Ge
Part Number: WD01X10569
Connects dishwasher door to spring mechanism to prevent door from dropping when opened. Replace if cable is broken, frayed, or detached from pulley.
Do-It-Yourself Stories from Customers like You
GE door came off hinges and was not staying closed Donnell W. • Ferguson , MO • October 12, 2019
Once I located the parts involved in the factory exploded drawing I ordered a cable and spring. Then, when I had the dishwasher pulled out I saw that both cables had simply slipped off of their pulleys and that the door needed to be re-set properly into its drop-down metal studs.
So now I have a spare set for any problems in the future! Very easy - two screws under the counter and pull forward. Shipping was quick and easy. First time customer.
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Ge part
By: Ge
Part Number: WD28X265
Replacement silverware basket with handle for your dishwasher. Needed when original basket is cracked, broken, or has worn holes that let utensils fall through.
Do-It-Yourself Stories from Customers like You
The utensil basket of our dishwasher was broken at the bottom Glenn T. • Glens Falls , NY • November 23, 2014
We ordered the item appliance parts pros said would fit our make/model. the part arrived in perfect condition faster than i could possibly imagine, and while it fit our machine, it was a big bigger than the original and it fits off-center, but i guess it works fine! excellent speed and ease of ordering. thanks
Read more
More
$79.95
- Compare At:
-
$94.34
- You Save:
-
$14.39
Genuine Ge part
By: Ge
Part Number: WD15X93
Dishwasher not filling with water or leaking during cycles? The water inlet valve controls water flow. DIY-friendly repair, typically 10-30 minutes.
Do-It-Yourself Stories from Customers like You
Dishwasher would not fill with water Robert N. • Susanville , CA • January 09, 2016
I took the inlet valve apart, found it was clogged with sediment, so I cleaned it and reinstalled it. Water was still not filing, so I figured the valve was sticking. I ordered a new valve,because $30 was a lot cheaper than a new dishwasher. I took out the old valve with two screws, and disconnected the supply line, the brass elbow, one hose, and a wiring harness. I reattached it in the same place, re-using the all the other parts, and once I turned the power and water back on, it worked as...
Read more
More
$44.21
- Compare At:
-
$54.85
- You Save:
-
$10.64