Husqvarna Parts

This part is a replacement v-belt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It can be used to replace a snapped, worn, or defective v-belt in a variety of different lawnmower models.The v-belt allows the lawnmower to be driven by connecting the drive pulley of the transmission to the motor pulley. This helps to enable torque to be transferred from the transmission to power the equipment. This is a part that is subject to significant wear and tear and will likely require replacement over time or with regular equipment usage. Proper tools may be required to install this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this v-belt, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this v-belt is suitable for use on several different models of lawnmowers manufactured by Husqvarna, Homelite, and Poulan. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

Throttle control cable for front-engine lawn tractors. Connects the throttle lever to the engine carburetor. Replace if cable is frayed, kinked, or broken.

Mower won't start with key turn? This ignition switch restores starting function on riding mowers and lawn tractors. Simple repair for most DIYers.

Steering drag link connects the pitman arm to the left spindle on lawn tractors. Replace if your original is bent, worn, or damaged for proper control.

Hinge rod for walk-behind mower discharge chutes. Allows chute to pivot while staying attached. Replace if bent, broken, or missing to secure chute.

Replacement nose roller that supports the front of your riding mower deck. Needed when roller is cracked, punctured, torn, or worn from ground contact.

If your riding mower won't start unless the brake is engaged or starts in unsafe conditions, the interlock safety switch may have failed. Direct replacement.

This is an engine zone control cable, also known as a control cable, manufactured by Husqvarna. This component stops the blade when a lawn mower handle is released. When this part goes bad, it can cause the brake not to release even when the handle is pressed down. Engine zone control cables are known for experiencing wear and tear with regular use. If the cable has any signs of damage, cracking, wear, or stretching, it will need to be replaced. First, disconnect the spark plug wire before releasing the cables from the handle. Next, remove the drive cover before removing the engine zone control cable. The replacement engine zone cable can be connected to the transmission and the drive cover can be replaced. Install the control cable back onto the mower handle, reconnect the spark plug wire, and the lawn mower will be usable again. This is a genuine OEM replacement part that comes directly from the manufacturer. It can be used for mowers from Husqvarna, Weed Eater, AYP, Craftsman, RedMax, Poulan, Poulan Pro, Jonsered, and McCulloch. It is sold individually, and the replacement is considered easy. A screwdriver and pliers are the only tools that will be needed.

The replacement throttle/choke control seen here is compatible with several lawn tractor models from well-known manufacturers. The throttle is an important part of the tractor, which will control the speed of the engine and the speed of the blades. It is also used to start the engine. Owners may notice that the machine has poor performance, and it is not easy to control the speed when there are issues with the throttle.The control mechanism is made from metal and plastic. While the piece is durable, it can still have issues that would require replacement. Some of the metal parts and connectors could start to wear down or even corrode over time. The plastic could crack on the handle, and it could be more difficult to use. Replace the part as soon as possible if necessary.The replacement throttle/choke control works with certain lawn tractors from Poulan, Husqvarna, and Jonsered. It is sold individually. This is a genuine OEM replacement part that has been sourced right from the manufacturer.

Throttle control assembly for front-engine lawn tractors. Mounts to dashboard or control panel. Replace if cable is broken, handle is cracked, or missing.

Drive belt for riding mower tractors. Replace when you notice slipping, excessive vibration, or poor performance. Verify fit with your model number.

Hardened flat washer for lawn tractors and riding mowers. Used to secure components and attachments. Replace if worn, missing, or damaged.

This is a genuine replacement brake spring that is designed for use with select snowblower units. The brake spring is connected from the idler pulley to the frame assembly. This provides the tension for the brake on the snowblower, allowing the brake to function correctly. Over time, this spring can become worn and stretched and need replaced. There may also be impact damage or other situations where the spring could break. Regardless of the cause, a broken brake spring needs replaced immediately for safe operation of the machine. It is important to disconnect the power and wear gloves when performing repairs on snowblowers, and especially when working near the blades. Disconnect the old spring, hook the new spring through the proper holes, and then reconnect the power and start the machine to test the brake.This genuine OEM brake spring is manufactured to exact standards by Husqvarna. It can be used in select snowblowers and throwers from Husqvarna, Poulan, and Jonsered. This is sold as an individual piece and does not include any hardware or other parts. The brake spring repair will require a screwdriver, pliers, and adjustable wrench.

Flat idler pulley for riding mower and lawn tractor drive systems. Replace if cracked, worn, or damaged to restore proper belt tension and alignment.

Nylon friction washer for gas snowblowers. Replace when worn to prevent slippage and maintain proper auger engagement. Verify fit with your model number.

Replacement mounting bolt for gas snowblowers and walk-behind mowers. Secures components and panels. Replace if bolt is stripped, missing, or damaged.