Husqvarna Parts

This is an engine zone control cable, also known as a control cable, manufactured by Husqvarna. This component stops the blade when a lawn mower handle is released. When this part goes bad, it can cause the brake not to release even when the handle is pressed down. Engine zone control cables are known for experiencing wear and tear with regular use. If the cable has any signs of damage, cracking, wear, or stretching, it will need to be replaced. First, disconnect the spark plug wire before releasing the cables from the handle. Next, remove the drive cover before removing the engine zone control cable. The replacement engine zone cable can be connected to the transmission and the drive cover can be replaced. Install the control cable back onto the mower handle, reconnect the spark plug wire, and the lawn mower will be usable again. This is a genuine OEM replacement part that comes directly from the manufacturer. It can be used for mowers from Husqvarna, Weed Eater, AYP, Craftsman, RedMax, Poulan, Poulan Pro, Jonsered, and McCulloch. It is sold individually, and the replacement is considered easy. A screwdriver and pliers are the only tools that will be needed.

The replacement throttle/choke control seen here is compatible with several lawn tractor models from well-known manufacturers. The throttle is an important part of the tractor, which will control the speed of the engine and the speed of the blades. It is also used to start the engine. Owners may notice that the machine has poor performance, and it is not easy to control the speed when there are issues with the throttle.The control mechanism is made from metal and plastic. While the piece is durable, it can still have issues that would require replacement. Some of the metal parts and connectors could start to wear down or even corrode over time. The plastic could crack on the handle, and it could be more difficult to use. Replace the part as soon as possible if necessary.The replacement throttle/choke control works with certain lawn tractors from Poulan, Husqvarna, and Jonsered. It is sold individually. This is a genuine OEM replacement part that has been sourced right from the manufacturer.

This control bar is a genuine Husqvarna part, sold individually. This control bar can be used as a replacement part for a string trimmer. The control bar provides a component for the user to pull down on in conjunction with the handle in order to start up the rotation of the string trimmer; when the control bar is released, the string trimmer ceases rotation.The control bar of a string trimmer might have to be replaced at some point within the lifespan of the appliance if it suffers enough damage to render it without function. If the control bar does not turn on the appliance when it is pulled or if the engine remains powered on and the string trimmer continues to rotate when the control bar is released, the component should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This control bar is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.

This throttle control assembly is a genuine MTD part sold individually. This throttle control assembly can be used as a replacement part in a lawnmower. The purpose of the throttle control assembly in a lawnmower is to allow the operator of the appliance to fully regulate and maintain the speed and pacing of the appliance to a customized setting that adheres to the needs and comfort of the operator.The throttle control assembly could be punctured, dented, ripped, torn, scraped, scratched, warped, or eroded, and if this damage precludes the function of the throttle control assembly, it should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This throttle control assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

This washer is a genuine Husqvarna part manufactured for use with lawnmowers. It is also compatible with lawn tractors, garden tractors, riding tractors, and other similar equipment. It is a hardened flat washer that is rather large compared to other washers. This washer is often used to attach the mower deck to the mower itself. Removing it is often part of a larger repair, and a screwdriver or socket wrench may be required to make this replacement. It is not unusual for washers and other hardware to experience wear and tear, especially if the mower gets heavy use. It may also need to be replaced if it becomes damaged while making other repairs.This washer is a genuine OEM part sourced directly from the manufacturer. It is sold individually, so be sure to check how many are needed and order accordingly. It is compatible with equipment manufactured by Ariens, Craftsman, Dixon, Husqvarna, Murray, and Craftsman.

This is a genuine replacement brake spring that is designed for use with select snowblower units. The brake spring is connected from the idler pulley to the frame assembly. This provides the tension for the brake on the snowblower, allowing the brake to function correctly. Over time, this spring can become worn and stretched and need replaced. There may also be impact damage or other situations where the spring could break. Regardless of the cause, a broken brake spring needs replaced immediately for safe operation of the machine. It is important to disconnect the power and wear gloves when performing repairs on snowblowers, and especially when working near the blades. Disconnect the old spring, hook the new spring through the proper holes, and then reconnect the power and start the machine to test the brake.This genuine OEM brake spring is manufactured to exact standards by Husqvarna. It can be used in select snowblowers and throwers from Husqvarna, Poulan, and Jonsered. This is sold as an individual piece and does not include any hardware or other parts. The brake spring repair will require a screwdriver, pliers, and adjustable wrench.

This flat idler pulley is designed for use with outdoor lawn and garden power equipment, specifically for many different models of lawn tractors and riding mowers. It is compatible with products from brands such as Craftsman, Husqvarna, Poulan, Murray, Ariens, and Troy-Bilt. The flat idler pulley part is crucial for the proper functioning of the lawn mower because it connects to the idler bracket. The purpose of the flat idler pulley is to apply tension to the v-belt. The replacement or repair process of the flat idler pulley will require a moderate amount of savvy. A wrench would be very helpful for the installation process.This flat idler composite pulley is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. This flat idler pulley is made out of metal.

This replacement part is a bolt, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Bolts are found in different places inside many devices. This part is essential to the overall operation of many machines. This specific one is intended for lawn mowers and assists the overall device in working properly.A new bolt might be needed if the current one is damaged or missing. It is possible that the bolt can become stripped or damaged overtime, and should be replaced if this is the case. Be sure to reference the specific owner's manual for more information on how to replace or install this bolt. This is a single bolt. Be sure to purchase the correct amount as many machines require more than one to operate. This is a genuine OEM replacement part sourced directly from the manufacturer.

This part is a bagger frame that is used on lawn tractors. The bagger frame attaches the bagger to the support post and the lawn tractor. The bagger frame also supports the components of the bagger.A new bagger frame will be needed if the original is no longer able to support the bag. If it is cracked, broken, or damaged in any way, it will need to be replaced. The bagger frame may become worn out after routine use over a period of time due to normal wear and tear. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This bagger frame is a genuine Husqvarna part. It is sold individually. This specific bagger frame is compatible with lawn tractors that are manufactured by the Husqvarna brand and the Craftsman brand.

This flange bearing is a genuine Husqvarna part, sold individually. This flange bearing can be used as a replacement part in a lawnmower. The purpose of the flange bearing in a lawnmower is to allow the rotation of one or more components within the inner ring of the flange bearing while also supporting non-rotating components in its outer ring.The flange bearing could be dented, punctured, scraped, cracked, warped, or eroded, and if this occurs to the point that the flange bearing ceases to serve its typical function, the flange bearing should be removed and replaced by this genuine OEM replacement part in order to ensure safe operation of the appliance.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This flange bearing is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Jonsered.

This hi-lift blade is a genuine OEM replacement for select 48-inch deck lawn mowers. The blade is attached to the deck using a bolt. When the engine is powered and the blade is engaged, it will rotate to cut the grass. With regular use, the blade can become worn beyond the point of sharpening. It can also become nicked or damaged from hitting rocks or other debris. When the blade is damaged, it needs to be replaced promptly for safe operation and optimal cutting. This genuine part can provide the replacement for compatible mowers. This OEM blade is manufactured by Husqvarna and designed specifically to be used in select mowers from the brand. It can also be used in models from Weed Eater, Craftsman/Sears, Poulan and Poulan Pro, and Roper. This blade features a 5/8-inch center hole for attaching and features a two-in-one operation that does not offer mulching. A mulching blade can be purchased if that feature is desired. Be sure to disengage the spark plug before going near the blade and wear gloves for hand protection at all times.

This carrier plate assembly is a genuine Husqvarna part, sold individually. This carrier plate assembly can be used as a replacement part in a string trimmer. The purpose of the carrier plate assembly in a string trimmer is to maintain the stable placement of the trimmer head.If the carrier plate has been dented, cracked, punctured, or otherwise damaged, the carrier plate assembly should be ordered as a genuine OEM replacement part. It is a simple replacement process that will require only basic tools to properly execute.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This carrier plate assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Jonsered, and Poulan.

This replacement part is a pulley. This is a genuine replacement part made by Husqvarna. Pulleys are very common in different types of machinery. This part allows for other pieces to be connected and work together so that the machine can operate effectively. A new pulley might be needed if the user notices unusual noises coming from inside the machine. This can be due to a malfunctioning pulley system or damage inside the appliance. Due to the friction that this pulley experiences, it is not unusual for this part to need replacing after years of normal use. Be sure the engine is completely powered down before attempting to replacing this part. Work gloves are also recommended when working near the engine. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.

This replacement part is a group of line bund intended for use in different lawn mowers. This is a genuine replacement part made by Husqvarna. Line bund is used to cut the grass in a uniform length. Without the line bund the lawn would be trimmed unevenly. A new line bund might be needed if the current one is damaged or broken in any way. It is common for this part to be replaced after years of normal wear and tear. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.