Husqvarna Parts

This torsion spring is a genuine Husqvarna part, sold individually. This torsion spring can be used as a replacement part in a lawn mower. The purpose of the torsion spring in a lawn mower is to store mechanical energy through the steady maintenance of spring tension such that it can deliver an equal amount of force in the opposite direction when twisted.The torsion spring could suffer from general wear and tear over long-term use or could be rendered broken after a collision with a hard object. If this occurs, the torsion spring should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This torsion spring is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Poulan Pro, and Craftsman.

This replacement part is a bolt. It is a genuine replacement part made by Husqvarna. These small parts are very common in different types of appliances. Bolts are important in holding different parts in place and secure so that the user is able to operate the appliance effectively. A new bolt might be needed if the user notices that other parts are loose or falling off. It is possible that the bolts can become stripped over time and will need to be replaced when this is the case. The repair should be fairly simple and will require a screwdriver or maybe pliers if the previous bolt is lodged in place.This bolt is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. This is a genuine OEM replacement part.

This is a key start with zone control cable that is used in many models of lawnmowers. It is attached on the handle at the control bar and is one of the components that help the motor start when the mower is being used. This part is made of durable plastic but can break or become damaged over time. When this occurs, the key start with zone control cable will need to be replaced to continue using the lawnmower.When replacing the key start with zone control cable, make sure the lawnmower is powered off and the spark plug wire has been disconnected. A pair of pliers will be useful for making the replacement. Put the lawnmower on a stable surface and locate the key start with zone control cable. This can be removed from the machine before installing a new component. Test the mower before use.The key start with zone control cable is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is made to be compatible with lawnmowers created by Poulan, Poulan Pro, Craftsman, and Husqvarna.

This transmission is a genuine MTD part, sold individually. This transmission can be used as a replacement part for a lawn mower. The purpose of the transmission is to allow the appliance to move through a variety of speeds so the operator can determine the pace at which the appliance is used.If the lawn mower is not able to regulate its speed or if the speed mechanism of the lawn mower is not functioning as usual, it is likely that the transmission has suffered damage. If this damage has rendered the transmission beyond functionality, the transmission should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This transmission is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement part is a clean-out tool. It is a genuine replacement part made by Husqvarna. This part works with different appliances and it meant to be used to clean different parts. This ensures that the overall appliance works properly.A new clean-out tool might be needed if the current one is damaged or missing. If the tool becomes too dirty and is unable to clean anymore it is recommended that it be replaced as soon as possible. Due to the nature of this tool, it is common that it can become worn down over time and need to be replaced. Be sure to wear work gloves during this repair. This clean-out tool is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This replacement part is a deflector shield. It is a genuine replacement part made by Husqvarna. This deflector shield works with the bagging chute so that the leaves and other debris end up in the proper place. This deflector shield is made of durable plastic so that it lasts a long time after replacement. A new deflector shield might be needed if the current one is damaged or broken in any way. This can include being cracked or dented. If the deflector is unable to connect to the main parts of the mower it might be time to replace this part. Reference the specific user manual for more detailed information on how to begin this repair. This part is sourced directly from the manufacturer and is a genuine OEM replacement part. This deflector shield is sold individually.

This part is a replacement torsion spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a defective torsion spring in lawn mowers.This torsion spring is what enables the mower's deflector shield to be easily moved up and down. Springs are subject to wear and tear and may become stretched, rusted, corroded, or snapped, requiring replacement. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this torsion spring, the appropriate owner's manual and equipment diagrams should be referred to. This nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawn mower models that have been manufactured by Husqvarna, Poulan, and other brands.

This clutch cable is a genuine Husqvarna part, sold individually. This clutch cable can be used as a replacement part in a lawn mower. The purpose of the clutch cable in a lawn mower is to provide the operator with a means of stopping and starting the lawn mower while in use, by engaging and disengaging the clutch cable when the operator wants to move the appliance forward or stop the appliance from moving.The clutch cable in a lawn mower might be subject to damage at some point within the typical lifespan of the appliance. If this damage prevents the clutch cable from serving its standard function for the lawn mower, the clutch cable should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, so that the safe use of the appliance can be guaranteed. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This clutch cable is compatible with the following outdoor appliance brands: Husqvarna.

The shoulder bolt has many applications in lawn equipment, but this model is designed for use in riding mowers. The job of this shoulder bolt is to keep the gauge wheel in the correct place. This part is often referred to as the roller bolt. Over time, this bolt can become worn from regular use. The threads on the bolt may strip or it may become damaged as a part of other repairs or incidents. In any situation, the best option would be to replace the bolt with this genuine OEM model from Husqvarna. This shoulder bolt is manufactured to exact specifications for replacement in the gauge wheel. This part is designed for use with riding lawn mowers from Poulan, Husqvarna, and Jonsered. It is compatible with several machines from these brands. This shoulder bolt is made of durable metal and requires a wrench for installation. It is sold as a single unit and does not include any other parts. Always wear gloves when replacing parts for hand protection. Be sure to disconnect the spark plug prior to doing engine work. This part includes a one-year warranty from the manufacturer.

This bow tie cotter pin is a manufacturer part designed to replace the original on select riding lawn mowers. The cotter pin has many applications, depending on the exact model of tractor, but typically acts as an anchor. The pin is installed in a drilled hole or small shaft on a bolt or axle and then the sections of the pin are spread to keep the assembly in the perfect position and hold everything together. These pins allow for some flexibility, but that also makes them subject to damage or breakage because of vibrations and other issues. This genuine cotter pin fits over 150 tractors from brands like Jonsered, Husqvarna, Weed Eater, Poulan, and Craftsman. Pliers may be required to replace this part. Always wear gloves and eye protection for added safety and disengage the engine before beginning any repairs. This cotter pin is sold as a single unit and does not include any additional components or hardware.

This is a genuine OEM replacement that is designed for use with riding lawn mowers. This idler pulley helps drive the engine of the Lawn Mower. This part experiences a lot of constant motion, which can cause it to wear over time. It can also become damaged due to an impact or in the course of other repairs, which would require a replacement. This genuine OEM part features a 3/8-inch mounting hole and 3.5-inch exterior diameter, and includes a one-year warranty and can provide a replacement for compatible engines. This OEM idler pulley is manufactured by Husqvarna and designed to be compatible with select machines from the brand, as well as brands like Poulan, Weed Eater, and Jonsered. It is made of durable plastic with a metal bushing and fitting and will provide an exact replacement fit for hundreds of compatible engines. This part is sold individually and does not include any necessary hardware. Ensure that the engine is cool and gloves are worn for hand protection when replacing this part.

This is a replacement V-belt that is supplied directly from the manufacturer. The V-belt connects the drive pulley to the transmission pulley. This allows the mower to move forward efficiently. The V-belt is made from rubber. Belts of any type will need to be replaced due to wear from regular use. All belts should be inspected prior to each mowing season for any tears or holes. Shine and flatness are also telltale signs of a belt in need of replacement. The mower may also not propel as well as it used to. The process of replacing the belt will differ slightly between each model. It can be accessed under the mower deck when it has been completely lowered on riding mowers. On older self-propelled mowers, the mower deck may need to be removed to access the location of the belt. New models may offer access to the belt when the cutting deck is lowered.The belt is a genuine OEM replacement part and is designed to be used with machines from the brands: Husqvarna, AYP, Craftsman, Jonsered, McCulloch, Poulan, RedMax, and Weed Eater.