Husqvarna Parts

Fix a lawn tractor that won't start or shuts off unexpectedly with this clutch interlock safety switch. Simple repair to restore safe operation.

Idler belt keeper fastener for lawn tractors and riding mowers. Secures to the idler pulley to guide and retain the drive belt. Replace if broken or missing.

Replacement blade brake arm for lawn tractors. Installs on the brake assembly to control blade stopping. Needed when original arm is broken or detached.

The replacement mower arm brake pad is sourced directly from the manufacturer. It is used with lawn tractors and is made from metal with an attached brake pad. The arm connects to the idler arm, which helps the driver of the lawn tractor to control the machine's speed. It is an important part of the machine that needs to be in good condition. However, this part could start to wear out over time, just as would happen with brake pads for other vehicles. This could be due to the normal wear and tear associated with using the tractor, or it could be due to corrosion or breaking. Owners will likely require a wrench when replacing the mower arm brake pad. This is a genuine OEM replacement mower arm brake pad, and it is sold individually. The part is for use specifically with certain makes and models of lawn tractor. It will work with more than 150 different machines. Compatible brands include Husqvarna, Craftsman, Poulan, and Ariens.

This is a genuine replacement shield browning for lawn mowers and garden tractors. The shield is used to protect the grass against heat from the muffler. The lawn mower shield browning can become damaged or worn over time, necessitating replacement. It is important to replace a worn shield browning to avoid damaging the lawn.A lawn mower shield replacement is a simple process. A socket set is needed for this project. The shield is located at the bottom of the lawn mower. Depending on the model, it is typically attached to a lower bracket near the lawn mower blade. The lawn mower shield is held on by two bolts, attached at its sides. To replace the part, remove bolts from the previous mower shield, and replace the bolts with the new mower shield browning. It is possible that the bolts attaching the mower shield browning have worn, in this case, find replacement bolts and dispose of any worn ones. This is a genuine Husqvarna replacement part. This part is compatible with Husqvarna, Poulan, and Craftsman lawn mowers. This part is sold separately.

Spring clip retainer fastener for riding mower and tractor assemblies. Replace this clip if broken, missing, or no longer holding components securely.

This is a genuine OEM clutch assembly sourced directly from the manufacturer; it is used in lawn mowers and lawn tractors to engage the blades. When the gear lever is pulled, the clutch engages. This causes the pulley wheel to spring out and tighten the blades against the turning drive shaft pulley, which then causes the blades to spin. If the clutch assembly is not working correctly, the blades will not move to cut the lawn. If the blades will not engage or if they are stuck and won't disengage, the clutch assembly should be replaced. This can occur if the clutch assembly overheats. Excessive use and normal wear and tear can also be the cause of a bad clutch. Before working on the clutch assembly, make sure the engine has had time to cool off to prevent burns. Remove the fuel from the fuel tank and fuel lines. Remove the spark plug to prevent accidental engine starting. Park the machine on a flat surface and chock the wheels to prevent rolling. Remove and replace the clutch assembly, then reinstall all parts and fuel. Check the clutch after replacement to ensure it is working properly.This clutch assembly is sold as an individual unit. It is compatible with lawn tractors and tractors manufactured by Craftsman, Husqvarna, and Poulan.

Grass collection bag for riding mowers. Attaches to deck to catch clippings during mowing. Replace if torn, ripped, or damaged to restore collection.

Replace a loose or missing flange nut that secures mower components. This top lock nut provides secure fastening for riding mower and tractor assemblies.

Headlight wiring harness assembly for lawn tractors and riding mowers. Replace when lights fail or wires are damaged. Verify fit with your model number.

Ignition harness wire assembly for lawn tractors and riding mowers. Connects ignition components to enable engine start/stop. Replace if cracked or worn.

This part is a clutch assembly that is used for riding lawnmowers and lawn tractors. A clutch is a safety device that stops the blade from spinning while the engine is still running. This part is manufactured out of a heavy-duty metal material.A new clutch assembly may be needed if the lawn tractor or riding lawn mower is stalling. Over time, the clutch may become worn or damaged and need to be replaced as part of normal wear and tear on the product. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This clutch assembly is a genuine Husqvarna part. It is sold individually. This particular clutch assembly is compatible with riding lawnmowers and lawn tractors that are manufactured by the Poulan, Husqvarna, and Jonsered brands.

Replacement wheel for walk behind lawn mowers. Installs on front or rear axle. Order when your original wheel is cracked, broken, or worn out.

Replacement wheel and tire assembly for walk-behind lawn mowers. Installs on drive axle. Replace when wheel is cracked, tire is worn, or tread is damaged.

Mower won't start unless seated? This seat safety switch prevents operation when the operator leaves the seat. Simple swap-out repair for most DIYers.

Transaxle torque mount bracket for riding mowers. Secures the K46 transaxle to the tractor frame. Replace if cracked, bent, or missing hardware.