Husqvarna Parts

This cable wire harness assembly is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. A cable wire harness assembly is designed for use with edgers, trimmers, or string trimmers. It is compatible with products from brands such as Husqvarna and Poulan.The cable wire harness assembly is a complete part assembly, and it includes both the throttle cable and the control wires. This item is used to run the motor as well as to adjust the engines out by linking the control handles. The replacement or repair process of the cable wire harness assembly is straight-foward, but the user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This lever control is a genuine Husqvarna part, sold individually. This lever control can be used as a replacement part for a lawnmower. The lever control regulates the throttle of the lawnmower so that the engine remains activated when the lever is engaged, and the engine is shut off when the lever is disengaged.If the engine is not responding to the lever control in any of its settings, it is likely that the lever control has suffered damage and should be replaced. If the lever control, upon a visual inspection, seems to be punctured, torn, scraped, eroded, or damaged in some other way as a result of general wear and tear over long-term usage or from a direct impact with a hard object, the lever control should be removed and replaced with this genuine OEM replacement part before using the lawnmower again. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This lever control is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement part is a pivot spacer and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is situated close to the wheels and assists the parts in minimizing friction throughout use. A new pivot spacer might be needed if the current one is visibly damaged or missing. If the wheels are not turning as properly as in prior uses it might be due to the pivot spacer. If there are unusual sounds coming from the machine, the spacer might also be damaged or missing. Be sure to refer to the owner's manual before replacing this part to ensure correct installation. This part should be easy to replace and repair and should require no more than common household tools.This pivot spacer is sold individually and is a genuine OEM replacement part. This part is also sourced directly from the manufacturer.

This is a replacement fuel check valve. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or faulty fuel check valve on various lawnmower models.The fuel check valve can be found in-between the grommet check valve and the hose clamp. This part prevents fuel from flowing back into the tank once the engine has been powered off. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part, including a socket set and pliers. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this fuel check valve, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this fuel check valve is suitable for use on several different lawnmower models manufactured by Husqvarna, Jonsered and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a lever handle that is part of riding lawnmowers and zero-turn tractors. The purpose of the lever handle is to connect the steering control handles to the control bracket for steering.A new lever handle may be needed if the original is cracked, broken, or damaged in any way. It may also become eroded and worn out so much that it will need to be replaced over time due to normal wear and tear as general machine maintenance. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This lever handle is a genuine Husqvarna part. It is sold individually. This particular lever handle is compatible with riding lawnmowers and zero-turn tractors that are manufactured by Husqvarna.

This is an assembly knob that is installed on many Husqvarna chainsaws. The purpose of the assembly knob is to offer a comfortable grip when adjusting the chain tension on the chainsaw. It is located near the chain on the tool and is made of durable plastic. This part can become damaged, experience wear, or be lost and will need to be replaced. If the component is missing or broken, it will be more difficult to adjust the chainsaw's tension.If the assembly knob needs to be replaced, the chainsaw should be turned off and placed on a stable surface. The spark plug wire should be disconnected for safety purposes. The replacement process will require the use of a screwdriver. Work gloves will also be useful to protect the hands. The original assembly knob can be removed with a screwdriver before installing the new part and operating the chainsaw as usual.This replacement part is made to be used with various chainsaws manufactured by Husqvarna. It is a genuine replacement component that is directly sourced from the manufacturer. The assembly knob is sold as an individual part.

This is a tire and wheel assembly that is intended for use with zero-turn lawnmowers. This assembly includes both a black tire and the silver-colored wheel rim. A new tire and wheel assembly may be needed if the tire has a hole or cut in the rubber that cannot be repaired. This can happen if the lawnmower runs over a nail or other sharp object that causes damage to the tire. After years of normal use, the tire and wheel assembly may become worn out and need to be replaced due to normal wear and tear.This tire and wheel assembly is a genuine OEM Husqvarna part. It is sold individually. This specific tire and wheel assembly is compatible with zero-turn lawnmowers manufactured by the Husqvarna brand and the Craftsman brand.

This is a four-in-one blade that is used for push mowers from several manufacturers. It is used for shredding and mulching leaves. This provides users with more options when cutting the grass on their lawns. If the blade is not working properly, it will limit the functionality of the mower.The metal blade on a mower is durable and meant to last. However, accidents such as running over stumps or rocks could cause the blade to bend or break. Older blades could become worn down and chipped. In some cases, the metal may even begin to corrode. Regardless of what causes the damage, owners need to change the blade out when it no longer works correctly. When replacing the part, users should wear work gloves to protect their hands. This blade works for certain models of push mowers from Husqvarna and Jonsered. It is sold individually and is a genuine OEM replacement blade sourced from the manufacturer.

This strong plastic wheel assembly can be used on many Husqvarna lawnmowers. It is the rear drive wheel that is driven using the lawnmower transmission assembly. The wheel assembly ensures the lawnmower can quickly and easily move across a lawn or garden. When used regularly, the wheel assembly can become damaged and may need to be replaced. Using the lawnmower without two functioning rear wheels will cause serious damage to the mower.A socket set is needed to replace the wheel assembly on a mower. A 9/16 socket can be used to remove the rear wheel. Before doing so, make sure the lawnmower is on a stable surface and the spark plug wire has been disconnected. Once the old wheel is removed, the new wheel can be replaced on the same socket. Replace the spark plug wire before use.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as an individual part. The wheel assembly is made for use with several models of lawnmowers from Husqvarna.

This is a replacement blade holder. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or otherwise defective blade holder on a variety of different lawnmower models. This part securely holds the blade of the lawnmower and allows the blades to be interchanged or replaced more easily. This part is subject to regular wear and tear from debris or contact with hard surfaces and may require replacement. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. Proper tools are required to replace this part. For more accurate information on how and where to install this blade holder, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this blade holder is suitable for use on several different lawnmower models manufactured by Husqvarna and Craftsman. This is a genuine part made of high-quality, durable materials and is sold individually.

This genuine Husqvarna replacement part is a blade for use with lawn mowers. It is also known as a rotor blade or bagger blade.The lawn mower blade is used to cut grass, and a bagger blade is designed to help lift clippings after cutting, helping them to more easily be directed into the lawn mower bag. A properly functioning blade is essential for the safe and reliable use of a lawn mower. The blade may become worn out or damaged due to extended use, requiring a replacement. Remember to check the blade periodically to spot any wear or damage. This part is an identical replacement for a blade that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. It is made of high-quality durable metal. This part is compatible with Husqvarna, Craftsman, and other lawn mowers. Please note: original part number 581101102 is now obsolete, and manufacturer has replaced the original part number with this part.

Note: This is ONE blade.