Husqvarna Parts

The seat switch cap is also called a seat switch button or a kill switch. This button is compatible with many lawn tractor models, and it serves an important safety purpose for the machine. The cap is essentially a safety switch that features two sets of contacts on the bottom of the button. One connects to the engine and the other is grounded. If the mower deck is engaged and the driver gets off the tractor, this cap turns off the engine. It can prevent injury if the rider falls off the mower while using it.If the seat switch cap is not working properly, it will mean that the mower will not turn off when the rider gets off the seat. While the caps are durable, they can wear down over time. They might crack or break, or the contacts could become damaged. Because this is such an important safety feature, owners will need to replace it before they use the tractor again.This seat switch cap is compatible with select models from Husqvarna. It is sold individually, and it is an authentic OEM replacement part.

Front suspension steering link assembly for riding mowers and lawn tractors. Replaces worn, damaged, or broken steering linkage components.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

This is a lawn mower blade adapter that will work with a range of mowers. The blade adapter is a part of the mower deck that helps to attach the blade. If the blade adapter has gone bad or is damaged, it can cause the blade to vibrate. If the adapter is severely damaged, the blade may not stay on the mower. It has the potential to be very dangerous. Replace the adapter right away if it is not working properly.The blade adapter is made from durable metal, and it should last a long time. However, there is a chance it could become damaged while mowing the lawn or due to corrosion. It is an easy repair to make, and owners can replace the adapter on their own in less than 10 to 15 minutes in most cases.The blade adaptor will work with select mower models from Craftsman and Husqvarna. The part is sold individually, and it is a genuine OEM replacement part sourced from the manufacturer.

Mower won't move forward or wheels don't turn? This transmission drives the wheels by engaging the drive belt when you pull the control bar.

Rear deck baffle for walk-behind mowers. Attaches to the rear of the mower deck to direct debris flow and water during cleaning. Replace if cracked or broken.

Muffler exhaust tube for riding mower tractors. Replaces cracked, rusted, or damaged exhaust tubing that needs replacement due to wear or corrosion.

Replace your riding mower's exhaust tube muffler if cracked, rusted, or leaking. This component directs hot exhaust gases away from the engine safely.

This exhaust pipe is a genuine Husqvarna part, sold individually. This exhaust pipe can be used as a replacement part in a lawn mower. The purpose of the exhaust pipe in a lawn mower is to redirect gases and combustion away from the appliance and from the operator.The exhaust pipe in a lawn mower might have to be replaced if it or any component near it shows signs of damage. Signs of damage to the exhaust pipe can include increased or unusual noise coming from the exhaust, reduced fuel economy, strong gasoline odor, hard starting or misfiring engine, or a burning smell from the exhaust. If any of these signs of damage occur, the exhaust pipe should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This exhaust pipe is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

Drive control cable for walk-behind lawn mowers. Connects handle controls to transmission drive system. Replace if cable is frayed, stretched, or broken.

Main body chassis frame for riding lawn tractors. Replace if cracked, bent, or structurally compromised. Central frame that supports engine and components.

Mower blades won't engage or disengage? This PTO switch controls blade engagement from your console. Direct replacement restores safe cutting control.

This replacement part is a fan. It is a genuine replacement part made by Husqvarna. This part works to keep the engine cool during use so that it does not overheat.A new fan might be needed if the user notices that the current one is not working. This can be due to normal wear and tear from years of normal use. If the user notices that the engine is becoming overheated it can be due to the fan not working properly or at all. Be sure the engine is completely powered off before attempting this repair. Refer to the owner's manual for more specific information on this replacement part.This fan is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

Replacement torque bracket for riding mower tractors. Mounts to the frame to stabilize engine torque. Replace if cracked, bent, or missing. Essential structural component for smooth operation.

This replacement part is a fan kit and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Fan kits are able to keep the parts inside the machine cool to prevent overheating and ensure that the engine is running properly. A new fan kit might be needed if the user notices that the current fan is not working properly or if the engine is overheating often. This can be due to a faulty fan and the part should be replaced as soon as possible. Without a fan kit the engine might be prone to overheating more frequently. Be sure to wear work gloves as this part is often adjacent to other dangerous parts. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. This is a genuine OEM replacement part.

Cable housing for walk behind lawn mower control cables. Replace if cracked, frayed, or damaged. Protects internal cable during operation.