Jenn-Air Parts

This replacement grease filter captures airborne grease and cooking residue in your appliance's venting system, helping protect the blower and ductwork while maintaining effective ventilation and airflow.

• Traps grease and food particles carried by the exhaust airstream
• Helps sustain proper airflow and reduce smoke and lingering odors
• Replace if mesh is torn, warped, missing, or remains clogged after cleaning
• Common symptoms include persistent smoke/odors, visible grease buildup, or a loose/rattling filter

• Disconnect power before servicing and allow the appliance to cool completely
• Open the filter access, release the retaining latch or screws, and remove the old filter
• Slide the new filter into place, matching the original orientation/tabs
• Ensure the filter is fully seated and secured; do not operate the unit without a filter

Microwave venthood grease filter. Color: silver. Measures about 5 inches wide by 7-1/2 inches deep.

This grease filter traps airborne grease and cooking residue from the vent airstream. Replacing a worn or clogged filter helps restore airflow, protects the blower and ducting, and reduces greasy buildup on surrounding surfaces.

• Captures grease particles before they reach the fan and ductwork
• Helps maintain proper ventilation performance
• Common symptoms of a bad filter: lingering odors, poor venting, visible saturation or damage, rattling or loose fit
• Regular replacement supports cleaner operation and effective exhaust

• Disconnect power to the hood or microwave before servicing
• Access the filter from the underside; release the latch or fastener and remove the old filter
• Install the new filter in the same orientation as the original; ensure it is fully seated and secured
• Do not operate the vent without a grease filter in place

Color: metallic. Measures about 15 inches wide by 8 inches deep.

This refrigerator water filter housing secures the filter cartridge and channels water through the system. Replacing a cracked or leaking housing helps restore proper water flow and leak-free dispensing and ice production.

• Holds and seals the water filter; connects the inlet and outlet water lines
• Routes filtered water to the dispenser and ice maker
• Common failure signs include leaks at the filter area, slow/no dispensing, or no ice production
• A worn housing can prevent the filter from seating or staying locked in place

• Unplug the refrigerator and shut off the water supply before starting.
• Dispense water to relieve line pressure; keep a towel handy for residual water.
• Note tube orientation; transfer any brackets or fittings from the old housing as needed. Ensure tubing is fully seated and locked.
• Restore water and power, then check for leaks and flush the system per the filter instructions.

Color: metallic. Measures about 11 inches wide by 2-1/2 inches high.

Color: metallic. Measures about 10 inches wide by 5 inches deep. Be sure to measure old filter before ordering. If your filter measures approx 11 1/4" x 6 1/8" use R0710163.

Replace a clogged or damaged vent grease filter to keep your appliance drawing properly. This filter captures airborne grease and cooking particles to protect the blower and help maintain effective ventilation over your cooktop.

• Traps grease and particulates pulled through the ventilation stream during cooking
• Helps protect the blower and internal components from buildup
• Supports proper airflow and smoke/odor capture from the cooktop area
• Replace if torn, warped, heavily saturated, or when cleaning no longer restores performance

• Disconnect power to the appliance before servicing
• Open the vent grille or filter access and release the retaining tabs/handle
• Note orientation; seat the new filter fully and latch securely
• Do not operate the vent without a grease filter installed

The Filter is an OEM part for Whirlpool cooktops. This part is responsible for trapping grease and other airborne particles, ensuring that your kitchen remains clean and free from unwanted odors during cooking. It effectively captures grease and prevents it from accumulating in the exhaust system.

A bad grease filter can occur due to clogging, damage, or excessive wear. If you notice symptoms such as poor ventilation, persistent cooking odors, or visible grease buildup in the downdraft vent, it may be time to replace the worn-out or clogged grease filter with this genuine OEM part.

Symptoms of a bad grease filter include:

• Poor ventilation and airflow
• Lingering cooking odors
• Visible grease accumulation in the downdraft vent

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Grease Filter is an OEM part for Whirlpool downdraft cooktops. It is responsible for removing grease and other cooking residue from the air before it is circulated back into the kitchen.

Causes of a bad grease filter include excessive grease buildup that prevents proper airflow and filtration. Grease filters should be cleaned regularly according to the manufacturer's recommendations.

Symptoms of a grease filter that needs replacement include:

• Reduced or inefficient airflow while in use
• Visible grease buildup or clogging of the filter screens

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement grease filter captures cooking grease and large airborne particles to help protect your hood or microwave exhaust system and reduce buildup on internal components. It restores proper airflow and helps maintain cleaner venting. What it does:

• Traps grease and large particulates from cooking vapors to protect internal fan and ductwork
• Helps reduce visible grease buildup and odors on the hood or microwave interior
• Can improve ventilation performance when a clogged or saturated filter is replaced
• Common symptom: heavy grease coating, reduced exhaust effectiveness, or visibly damaged/soiled filter

• Disconnect power to the appliance before servicing or accessing the filter area
• Follow your appliance owner's manual for filter access and removal instructions
• Typically installs by sliding or snapping into the filter slot behind the grille—verify fit before final installation
• If the filter is washable, clean according to manufacturer recommendations; replace if damaged or excessively clogged

Package of 3. Measures approx. 12 7/8" x 10 1/4".

Replacement water filter cartridge for compatible refrigerators. Helps restore clean-tasting water and clearer ice by reducing common taste, odor, and sediment issues. Easy-to-replace cartridge keeps your dispenser and ice maker working properly. What it does:

• Filters common taste, odor and sediment issues that cause off-tasting water or cloudy ice
• Helps prevent particulate build-up that can reduce dispenser and ice-maker performance
• Improves overall water clarity and mouthfeel for drinking and ice
• Common symptoms this part addresses: bad taste or odor, cloudy ice, or reduced water flow from the dispenser

• Replace per the refrigerator manufacturer's instructions; ensure the cartridge fully seats and seals
• After installation, run the water dispenser until flow is clear to flush air and any loose carbon fines
• Dispose of the old cartridge according to local regulations

This fine screen is the small mesh filter that sits in the dishwasher sump to catch food particles and help protect the pump and wash system. It keeps debris from circulating so dishes rinse more effectively. What it does:

• Traps food and debris in the sump to prevent clogging and pump damage
• Helps maintain proper water flow for consistent wash and drain performance
• Reduces risk of food redepositing on dishes during cycles
• Commonly replaced when torn, heavily clogged, or missing

• One fine mesh sump screen

• Turn off power and disconnect the dishwasher before servicing
• Remove the lower dish rack and access the sump area to replace the screen
• Inspect surrounding seals and housing for damage while servicing
• No special tools typically required; handle mesh gently to avoid deformation

Filter is approx 11 1/4" x 6 1/8". Be sure to measure old filter before ordering. If your filter measures approx 5"x 10" use WP56001084