Kenmore / Sears Drawer, Shelf, Pan

Ordered new parts Read more

I was able to view the video then order parts on Appliancepartspros.com. Initially, I received the wrong part but we were able to resolve the issue quickly and I fixed my issue in 10 minute with the right part. Read more

Replacing the ice maker fixed the issue. Because the ice maker was redesigned. I needed a new ice cream shelf. If your current ice maker has a power switch that is vertical, you will need a new ice cream shelf to make it fit correctly. The repair was very easy. All I had to do is loosen two screws on the ice maker mount and slide it out. Then disconnect the connector and install the new ice maker. It was probably the easiest repair I have ever done. Read more

I was unable to find the snack drawer guide which was mounted under the middle of the large shelf for my LG refrigerator. In the parts description for my model the snack drawer was mounted under a small shelf. By ordering a right hand drawer guide with a right hand shelf bracket, I was able to move the left shelf bracket and guide from the large shelf to the small shelf. Take the right small shelf bracket and put it on the large shelf. Install the new parts to the right side of the small... Read more

Was able to type in the model number on the website. Took a little bit of figuring out the parts I needed to order (since some were assigned new part numbers over time) but not too bad. The website (or a review) made it known that I would need to cut the bar for the rack with a simple hacksaw. Long story short, the parts fit as they should and it was not too hard to cut the bar down to size. There are also youtube videos available on this! Took a little longer to actually properly insert the... Read more

Just ordered the part and the filter, I was very happy because I ordered the parts in one day and was delivered on the next day. Read more

Watched video on your website - it was very helpful. Read more

I ordered the sliders and fixed the drawer. Read more

Replaced it with a new one purchase from AppliancePartsPros.com. Read more

I am a 76 year old woman. I installed the end caps and the basket and it works great. It was a very easy job. Read more

Purchased and installed replacement parts. Had to use metal hacksaw to cut rail to correct length. Everything fit great. Read more

Disassembly is a little tricky. First, with a #2 phillips screwdriver, remove the single screw to the left of the ice chute/water dispenser. You'll have to get down low and look up from underneath. Next, underneath on either side, there are little slots with arrows pointing to them. Take a small straight slot screw driver and insert in each slot while gently pulling on the clear ice chute. It will pop out bottom edge first. Keep pulling out and up. The whole screen will pop out. Let it hang by... Read more

I am a 76 year old woman. I installed the end caps and the basket and it works great. It was a very easy job. Read more