Kenmore Elite Washer Parts
Genuine Lg part
By: Lg
Part Number: MCJ61861201
The Coupling Washer is a genuine OEM part for LG washing machines. As a crucial component connecting the drive motor to the inner drum, the coupling washer allows for the transmission of rotational force during the spin cycle. This rotational movement generated by the drive motor is what extracts water from clothing, effectively drying clothes.
Symptoms of a bad coupling washer include:
- The washing machine fails to spin or rotates very slowly
- Vibrations and noise during spinning
- Rubber couplings tearing or shredding prematurely
Over time, the constant exposure to vibrations and forces during spin cycles can cause the rubber material of the coupling washer to deteriorate.
This OEM LG part is also compatible with Sears/Kenmore washers.
More
$36.95
- Compare At:
-
$43.60
- You Save:
-
$6.65
Genuine Lg part
By: Lg
Part Number: 3108ER1001E
Fix leaking water from the bottom of your washer with a new pump casing. Houses and protects the water pump. Moderate DIY repair with clear instructions.
Do-It-Yourself Stories from Customers like You
Odd noise on start oe code which indicates drain pump Bob S. • Miller Place , NY • December 13, 2023
This was Kenmore front load washer made by LG. Model 796.41302610
First, AppliancePartsPros.com has been great. This is my fourth time using them. Staff, DIY comments, and videos are all very helpful. Always ended up with the right part and received next day. The machine made an odd noise on start-up. I ran diagnostics. Had a problem finding how to do diagnostics since the instructions in the manual were wrong. Found the correct process on YouTube. Needed to hold the spin and soil buttons...
Read more
More
$26.72
- Compare At:
-
$31.80
- You Save:
-
$5.08
Genuine Lg part
By: Lg
Part Number: 6201EC1006T
The Noise Filter Assembly is an OEM part for LG washing machines, designed to minimize electrical noise interference within the appliance. This essential component ensures that the washer operates smoothly without emitting disruptive sounds that can affect both the performance of the washer and the comfort of your home environment.
Causes of a bad Noise Filter Assembly can range from wear and tear over time to exposure to power surges or electrical spikes, which can damage the internal components of the filter.
Symptoms of a bad Noise Filter Assembly include:
- Increased electrical noise or buzzing sounds emanating from the washer
- Intermittent disruptions in the washer's performance
- The washing machine failing to start or experiencing power fluctuations
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg washer would not turn on unplugging it allowed for one load but needed to be replunged each time Nieves O. • Sugar Land , TX • September 11, 2016
Searched the web and determined it was something called a noise filter. Ordered the part from ApplianceParts Pros. Received it in about 3 days, normal shipping. Replaced the part. Took about 15 minutes from start to finish. Problem solved. Cost less than $50.
Read more
More
$80.95
- Compare At:
-
$96.33
- You Save:
-
$15.38
Genuine Lg part
By: Lg
Part Number: AHL72914402
Fix grinding noises or a drum that won't spin with this washer motor rotor assembly. Common when spline teeth strip. Moderately difficult repair.
This part fixes the following symptoms
-
won't spin
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
I heard grinding then noticed lack of rotation in a 4 yr old lg front loader washer David C. • Gaston , OR • September 19, 2015
I looked on the internet for similar descriptions for similar models and found many angry reports. Most said that the rotor assembly was bad as the nut that held the rotor and other parts together had loosened and allowed slippage between steel and plastic splines. Yes, I know that sounds like trouble, but apparently not to LG when they designed it. Most buyers complained that the part was covered by warrantee but not the labor and labor had been quoted as $400 to $600 dollars. Time to buy...
Read more
More
$195.73
- Compare At:
-
$234.88
- You Save:
-
$39.15
Genuine Lg part
By: Lg
Part Number: 5221ER1003A
This three coil solenoid is used for the cold water, bleach dispenser and prewash.
Do-It-Yourself Stories from Customers like You
The valve assembly started leaking so i ended up needing to replace it before too much water got on the inside parts or on the floor! Benjamin M. • Lynchburg , VA • February 12, 2016
1. I unplugged the washer from outlet
2. I turned off the hot and cold water taps going to the washer (both just in case)
3. Draped a towel over back edge of washer and under where hoses coming from water outlets attach to back of washer (to catch any loose water out of the hose or screw nozzle leading to valve assembly, then unscrew (by hand) the cold water hose from back of washer (leave hot water hose alone as not needed).
4. Unscrew valve assembly from washer by two screws on back top of...
Read more
More
$104.04
- Compare At:
-
$114.44
- You Save:
-
$10.40
Genuine Lg part
By: Lg
Part Number: 4769ER4001B
The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.
Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism.
Symptoms of a bad Float Assembly include:
- Water overflowing from the washing machine
- Inadequate water levels that affect the washing cycle's effectiveness
- The washing machine failing to start the fill cycle due to a malfunctioning float switch
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
LG front loading washer leaking water. James R. • Pepperell , MA • July 15, 2022
The hot inlet valve was dripping water, replaced it. Water and soap were coming out of the vent pipe. The new Float assembly had a shorter shaft than the old Float Assembly I was replacing. I did install the new Float Assembly and cleaned the vent hose where the float seats and I haven't seen any more water on the floor. Both repairs were made easy by watching your repair videos.
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Lg part
By: Lg
Part Number: 4280EN4001G
The Bearing Ball is an OEM part for LG washing machines. This component plays a crucial role in the smooth operation of the washer drum, enabling it to rotate quietly and efficiently during the wash and spin cycles.
Causes of a bad bearing ball can include regular wear and tear, exposure to heavy loads, or insufficient lubrication. Over time, these factors can lead to deterioration and reduced performance of the bearing ball, potentially causing the washer drum to spin improperly or not at all.
Symptoms of a bad bearing ball include:
- Loud rumbling or grinding noises during the wash or spin cycles
- The drum not spinning or spinning unevenly
- Increased vibration or movement of the washer
- Leaks from the drum area due to damaged seals
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad bearings. Jill C. • St. Louis , MO • July 22, 2019
I removed the barrel from the inside of the washer, and removed the tub after that I punched out the bearings and replaced them with the ones that were sent which by the way I received within a couple of days. I ordered the inner bearing outer bearing and the seal.
Read more
More
$84.95
- Compare At:
-
$101.94
- You Save:
-
$16.99
Genuine Lg part
By: Lg
Part Number: AGM73269501
Filters debris from water entering your washer. Replace when water flow is reduced or sediment buildup occurs. Verify fit with your model before ordering.
Do-It-Yourself Stories from Customers like You
The rince cycle water output was very little Carl D. • Snow Camp , NC • March 31, 2014
I was cleaning the supply hose filter screen constancely, I had no Idea there was filter screens in the pump intakes on the machine. once I found them and replaced them, I had plenty of water, so don't buy supply hoses with the screens in them until you check to see if your machine has them already.
Read more
More
$13.72
- Compare At:
-
$16.33
- You Save:
-
$2.61
Genuine Lg part
By: Lg
Part Number: 6631EL3003B
Dryer won't auto dry or cycles run too long? This moisture sensor wire harness connects sensor bars to control. Restores accurate dry cycles. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Lg dryer (12 yrs old) would dry for a while on any heat setting then shut completely off stay off no power complete black out then after 20 30 minutes come back on George C. • Kingwood , TX • August 30, 2015
I spoke with the experts at parts pro and they suspected the main power board. I ordered the main power board along with the control panel. Since I was taking everything apart I decided to replace other components as well- thermostats, thermistor , sensor wire. When I was all done the old LG was back to working like new. Oh while I was at it I cleaned and vacuumed out the complete machine. Great factory parts, videos p, service and videos, the price of all the parts was less than a repair...
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Lg part
By: Lg
Part Number: AHA72973309
Washer won't drain or shows drain error? This drain pump assembly removes wastewater from the tub. Moderate DIY repair, 1-2 hours with basic tools.
Do-It-Yourself Stories from Customers like You
Kenmore front load washer showed drain pump error. Louis C. • Corp Christi , TX • November 23, 2021
I also noticed one of the two water recirculation outlets near the front door was no longer spraying water.
When I took it all apart, I found that these two tub water recirculation outlets are both connected to the pump.. one was clogged.
The impeller on the drain pump was no longer spinning with the motor.. looks like it was worn on the inside.. when I took the pump apart it was full of scale. I could have just ordered the motor...but I figured I would replace the entire assembly as I also...
Read more
More
$216.78
- Compare At:
-
$260.14
- You Save:
-
$43.36
Genuine Lg part
By: Lg
Part Number: 4774EL2001A
The Door Hinge is an OEM part for LG dryers. This hinge supports the dryer door, allowing it to open and close smoothly and securely. It ensures that the door stays aligned and functions properly, providing reliable access to the dryer drum for loading and unloading clothes.
Causes of a bad door hinge can include frequent use leading to wear and tear, physical damage from forceful opening or closing, and rust or corrosion due to exposure to moisture.
Symptoms of a bad door hinge include:
- Difficulty in opening or closing the dryer door
- The door not staying aligned or becoming loose
- Squeaking or grinding noises when moving the door
- Visible damage, bending, or rust on the hinge
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken door hinge Stacey C. • Harrisburg , PA • June 12, 2014
This part was the perfect fix for my broken door hinge on my LG front loading dryer. I watched a video on YouTube of a hinge replacement of a similar front loading Samsung dryer. I needed a little help from my son holding the door glass and plastic in place while re-attaching the door to the hinge, but it was an easy repair.
Read more
More
$95.95
- Compare At:
-
$114.18
- You Save:
-
$18.23
Genuine Lg part
By: Lg
Part Number: 5006ER3021A
Fix a loose or missing fabric softener cap that won't stay in place or causes drawer issues. Simple snap-in replacement restores proper dispensing.
Do-It-Yourself Stories from Customers like You
Dispenser assembly was broken Richard R. • Bellerose , NY • September 19, 2014
Took top off and did a line at a time
Read more
More
$29.74
- Compare At:
-
$35.39
- You Save:
-
$5.65
Genuine Lg part
By: Lg
Part Number: 4413EA1004D
Fix squealing or grinding noises during spin cycles with this washer motor rotor assembly. Works with the stator to rotate the drum. Video guide available.
Do-It-Yourself Stories from Customers like You
Bearings let go in clutch, loud noise would not spin or cycle, code for out of balance came on and then LE for drum sensor, the rotor bushing got bent when the bearings went Guy G. • Portersville , PA • August 07, 2020
Ordered new clutch, rotor and drum sensor assembly. If your clutch bearings go, make sure you check rotor, stator and sensor for damage.
Read more
More
$195.73
- Compare At:
-
$232.92
- You Save:
-
$37.19
Genuine Lg part
By: Lg
Part Number: MFG62439301
Fix DE door error codes or doors that won't latch with this washer door latch hook. Simple 15-minute DIY repair with video guide. Secures door during cycles.
Do-It-Yourself Stories from Customers like You
LG front loader door error DE Phil P. • Fort Myers , FL • July 05, 2019
Changed out door switch and door latch hook. Watched video it was so easy. Appliance Parts Pros save me hundreds of $$$$. This is the 3rd time I used this company I must say they are the best.
Read more
More
$33.70
- Compare At:
-
$39.77
- You Save:
-
$6.07
Genuine Lg part
By: Lg
Part Number: ACZ72910401
Fix dispenser overflow or leaking issues with this washer detergent drawer assembly. Channels water through detergent and softener compartments. DIY repair.
Do-It-Yourself Stories from Customers like You
Washing machine was knocking while in spin cycle. Lonnie B. • Blythewood , SC • October 13, 2017
One of the suspension rods was not working so I replaced the bad one and the other three . Tub has now leveled out and is spinning properly without making the noise. Have not needed to replace the pump but will do so if necessary. Thanks to Appliance Parts Pro for their prompt service and quality products.
Read more
More
$36.95
- Compare At:
-
$43.60
- You Save:
-
$6.65
Genuine Lg part
By: Lg
Part Number: 6877ER1016F
Washer won't spin or shows LE error? A faulty motor wire harness disrupts power to the drum motor. DIY fix in 20-60 minutes with basic hand tools.
Do-It-Yourself Stories from Customers like You
The thermal sensor was bad leading to the stator motor overheating John S. • Lower Burrell , PA • March 05, 2016
I replaced the rotor and stator motor assembly.
Read more
More
$57.95
- Compare At:
-
$68.38
- You Save:
-
$10.43
Popular Kenmore Elite Washer Models