Kenmore / Sears Parts

Bypass cap allows your refrigerator to operate without a water filter. Install when using external filtration or to restore water flow. Verify fit.

Holds the filter cartridge and seals water lines to your dispenser and ice maker. Replace if cracked or leaking to restore proper flow. Confirm fit by model.

This line noise filter conditions incoming AC power by reducing electromagnetic interference before it reaches the appliance's electronics. Replacing a shorted or damaged filter can restore stable operation and help prevent erratic control behavior.

• Filters EMI/RFI on the power line before it reaches the control system
• Helps protect sensitive electronics from interference and voltage spikes
• Failure may present as no power, intermittent resets, or nuisance GFCI/breaker trips
• Typically mounted near the power-cord entry; also called a line filter

• Disconnect power and allow any capacitors to discharge before servicing
• Note wire positions and line vs. load orientation; take a photo before removal
• Secure the ground and mount the new filter firmly to the chassis
• Route and reconnect wires carefully to avoid pinching; reassemble and test

This EMI line filter reduces electrical interference on the incoming power to help protect the appliance's electronics and ensure stable operation. A failed filter can leave the unit dead, intermittently power-cycling, or tripping a breaker.

• Filters electromagnetic interference (EMI) on the AC line
• Helps protect the control board and other sensitive circuits
• Common symptoms: no power, intermittent power, or breaker/fuse trips when the unit starts
• Typically located near the power-cord entry or main control

• Disconnect power before servicing; allow a few minutes for any capacitors to discharge
• Note and label wire positions; move wires one at a time to the new filter
• Secure the filter to its mounting bracket and ensure the ground connection is tight
• Inspect wiring for shorts or damage before restoring power and testing

Charcoal filter for over-the-range microwaves removes odors and recirculates air. Replace every 6-12 months for optimal performance. Verify fit by model.

The Grease Filter is an OEM replacement part for Whirlpool range hoods. It measures about 16 inches wide by 3 inches high.This filter traps grease particles from the air during cooking, helping to keep your kitchen cleaner and your range hood functioning efficiently. It is designed to be durable and easy to remove for cleaning or replacement.

Causes of a bad Grease Filter can include prolonged use without regular cleaning, which leads to clogging from grease buildup. Damage can also occur from repeated exposure to high heat or improper handling during maintenance.

Symptoms of a bad Grease Filter include:

• Reduced airflow or ventilation performance
• Excessive grease accumulation on kitchen surfaces
• The filter appearing warped, clogged, or damaged

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Reduces odors from onions, garlic, fish, and spoiled food using activated carbon and baking soda. Replace every 6 months for fresh air. Confirm fit by model.

Charcoal filter removes cooking odors and impurities from microwave air circulation. Replace every 6 months or when odors persist. Confirm fit.

Captures grease, smoke, and odors from your range's downdraft vent. Replace when saturated or damaged. Clean monthly with hot soapy water. Confirm fit.

Captures grease, smoke, and airborne particles from cooking. Replace when visibly dirty or clogged to maintain air quality and prevent buildup. Verify fit with your model number.

Range hood grease filter captures cooking grease and smoke. Replace when clogged or discolored for optimal ventilation. Verify fit with your model number.

This adapter tube assembly connects sections of the appliance's water line to create a secure, leak-resistant path for water flow. Replace it if the tube is cracked or the connection no longer seals properly to prevent leaks and restore flow.

• Connects water tubing between components within the appliance's water system
• Helps maintain a tight, leak-resistant seal at the joint
• Restores proper water flow when a tube or connector is damaged
• Typical symptoms: water leaking at the connection, reduced or no water flow, visible cracks/kinks, loose fit

• Disconnect power and shut off the water supply before servicing
• Relieve line pressure and place a towel or pan to catch any residual water
• Note routing and orientation before removal to ensure correct reassembly
• After installation, restore water and check all connections for leaks

Grease filter traps airborne particles and smoke during cooking. Replace when clogged or damaged to maintain proper ventilation. Verify fit by model number.

Replacement grease filter for over-the-range microwaves. Traps grease and odors from cooktop. Replace when discolored or clogged. Verify fit by model.

Captures grease particles during cooking to maintain air quality and microwave efficiency. Replace when clogged or discolored. Verify fit with your model.

Replace your refrigerator's water filter cup if cracked, leaking, or frozen. Protects the filter and prevents leaks. Verify fit with your model number.