Kenmore / Sears Parts

Replaced filter housing ,flushed water lines. Read more

I got it in the mail, I opened it, I handed it to my wife....and she installed it. Easy-Peasy! (Being retired is a blast) Read more

Water dispenser came down to a trickle and made a lot of noise, I changed the filter but it didnt help and thus the water tank/head assembly needed to be replaced. Replacing the water Tank/head assembly was an easy task, the hardest part is removing the covers and taking care of not breaking the insulation of the water inlet hose. For the not-so-experts like me it is also good to rememebr to have a bucket to collect all the water that comes out after the connection to the solenoid valves is... Read more

I was cleaning the supply hose filter screen constancely, I had no Idea there was filter screens in the pump intakes on the machine. once I found them and replaced them, I had plenty of water, so don't buy supply hoses with the screens in them until you check to see if your machine has them already. Read more

• Leaking
• Not dispensing water

Turned off water behind the fridge. Unscrewed housing that covered water lines behind the filter base with a 1/4" socket. Pulled out the water hoses by pulling forward on the blue ring holding the hose while pulling the hose backward. Unscrewed the two screws below the filter base. Used the 1/4" socket to remove four additional 1/4" nuts holding the front housing until it partially dropped. I kept the housing propped on a jar. Unscrewed two additional screws holding the filter release rod in... Read more

Replaced filter with plug. Read more

Replace the part Read more

Replaced Read more

Simple fix, just replaced the screen with the new one I ordered from you Read more

I started by watching the video posted by couple of people on youtube on how to replace a microwave handle. After taking out the liner, I hit a roadblock with unscrewing the handle screw. The grip on the front side had basically melted causing it to be loose, so the screw and the plastic part would rotate together. After trying several things, I gave up and took it to Ace hardware to find an extractor of some sort. Luckily, the guys there used several tools and managed to get the screw out.... Read more

The video was very helpful, but my KitchenAid model required slightly more steps. Only the two screws in front held the filter housing, same as the video shows, but it has to be removed from the rear. My model did not have the wire brace, only the two front screws held the housing. Shut the water off and pull the electrical plug. Remove the two screws holding the filter housing in the front. Remove the lower panel in the rear at the bottom of the refrigerator. Remove the two screws holding the... Read more

I looked up "fix microwave oven handle" on Youtube for my particular model, and found it is quite easy to replace. I looked up the replacement piece on line at AppliancePartsPros.com. It was a breeze to find the exact part I needed. I placed my order and received my part in the mail a few days later. Fixing my appliance was fast and easy with AppliancePartsPros.com, and saved me a small bundle of money. Read more

Replaced housing. That was simple but finding directions in how it I remove top of cabinet was time consuming. After two hours of searching I finally found one article that explained why there were no screws to remove. Read more

Quick replacement by sliding out the old filters and sliding in the new filters. Read more

It's bit of a chore in that on my Whirlpool Refrig you need to remove the grill on bottom front and the Utility Panel on bottom rear. Then unscrew the original filter housing and pull it out through the back of utility opening. Remove the two water hoses and put them into new filter house. Reverse the disassembly process to reinstall new filter housing. I'm old and slow so the process took me about 45 minutes. (Note: Unplug electric and turn off water inlet before starting.) Read more