Kenmore / Sears Heating Element

Best Seller

Genuine Lg part

Kenmore Heater Assembly

By: Lg

Part Number: 5301EL1001H

The Heater Assembly is an OEM replacement part for LG dryers. It is a critical component responsible for generating the heat necessary for drying clothes efficiently and effectively.

Symptoms of a bad heater assembly:

Dryer not producing enough heat or failing to dry clothes completely
Excessive drying times or inconsistent drying performance
Visible damage or breaks in the heating element coil
Burning odors or smoke emanating from the dryer during operation

Causes of a bad dryer heater assembly can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.

This OEM LG part is also compatible with Sears/Kenmore dryer models.

Do-It-Yourself Stories from Customers like You Dryer taking 2 3 drying cycles to dry my clothes William L. • Collierville , TN • February 03, 2015

After reading several stories online about what to replace to fix the issue with my dryer not completely drying my clothes I decided to purchase a heating assembly, a sensor and a thermistor. I am not sure which one of these three pieces corrected the issue, but my dryer is back to drying my clothes as it should. The Youtube video's are priceless in helping to find and replace the parts. Read more

$217.63

Compare At:: $258.98
You Save:: $41.35

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Bake Element

5.0 (56)

By: Frigidaire

Part Number: 318254906

The Bake Element is an OEM part for Frigidaire ovens. It is responsible for providing the necessary heat for baking by converting electrical energy into heat within the oven cavity, ensuring even and consistent cooking results. It measures 19-1/2" wide, 15" long, and has 3-1/2" inserts, with a rating of 3400 watts and 240 volts.

Causes of a bad bake element can include normal wear and tear over time, damage from high temperatures, or electrical malfunctions that cause the element to short out or break.

Symptoms of a bad bake element include:

Uneven baking results
The oven not reaching the desired temperature
Visible damage or breakage on the element
The element not glowing red when in use

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Little to no heat when baking

Do-It-Yourself Stories from Customers like You Broken Newton W. • Austin , TX • August 23, 2016

With my tools Read more

$153.95

Compare At:: $184.74
You Save:: $30.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Bake Element

4.9 (83)

By: Ge

Part Number: WB44T10018

The Bake Element is an OEM replacement part for GE ranges. It is a crucial component responsible for generating the intense heat necessary for baking and roasting in the oven cavity.

Causes of a bad bake element can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.

Symptoms of a bad bake element include:

Oven not heating up properly or failing to reach the set temperature
Uneven heating or hot spots within the oven cavity
Visible damage or breaks in the element coil
Unusual smells or burning odors emanating from the oven

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore oven models.

This part fixes the following symptoms

Little to no heat when baking
Element will not heat

Do-It-Yourself Stories from Customers like You The self cleaning feature of my ge double oven hasn't worked in years and recently the upper oven baking element stopped working Robert A. • Enfield , CT • October 19, 2015

I wanted to get the upper oven baking element replaced; it hasn't been working for a few months. This double oven has had two other issues, there is a fan that comes on to cool the electronics panel, That fan has made excessive noise and it operates for 2-3 hours after the oven turns off. The other problem with the oven is the Self-Cleaning feature runs for about 15-30 minutes and then turns off with an error code. I've had a local appliance repair person in to address the error code and... Read more

$93.95

Compare At:: $112.74
You Save:: $18.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Oven Broil Element

4.9 (89)

By: Ge

Part Number: WB44K5009

The Broil Element is an OEM part for GE ovens. This element is located at the top of the oven and is crucial for the broiling function, providing high heat for cooking dishes such as meats and vegetables directly under the heat source. The broil element glows red hot when in use, creating the necessary temperature to sear food and lock in flavors.

Symptoms of a failing Broil Element include:

The element not heating up when the broil setting is activated
Uneven cooking or lack of browning on food intended to be broiled
Visible damage to the element, such as blistering, bubbling, or breaks in the element coil
No visible glow from the element during operation

Causes of a bad broil element often involve burnout from regular use, electrical issues such as faulty wiring or a malfunctioning thermostat that doesn't cycle the heat correctly.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Element will not heat

Do-It-Yourself Stories from Customers like You Broil element burned out Tommie S. • Greensboro , NC • June 12, 2014

Once I received the element within three days, I simply removed the other element by unclipping and unplugging lugs in rear. Placed the new one in clips and connected lugs and all was good! Read more

$66.95

Compare At:: $79.67
You Save:: $12.72

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Dryer Heater Assembly

4.8 (61)

By: Frigidaire

Part Number: 131475320

The Dryer Heater Assembly is an OEM part for Frigidaire dryers. It is responsible for generating the heat necessary to dry clothes during the drying cycle. This assembly includes a back plate, ceramic insulators, a 5/16 inch terminal heater element already attached, and a dryer safety thermostat.

Over time, the heater assembly can fail due to factors such as regular wear and tear, overheating, or electrical issues. A faulty heater assembly can result in the dryer not producing enough heat or not heating at all, significantly affecting the appliance's performance.

Symptoms of a bad dryer heater assembly include:

Dryer not heating or taking too long to dry clothes
Clothes coming out damp after a full drying cycle
The dryer shutting off prematurely or not reaching the desired temperature

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016

The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible. Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem. Next step was to... Read more

$78.95

Compare At:: $108.95
You Save:: $30.00

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Oven Broil Element

4.9 (100)

By: Ge

Part Number: WB44T10009

The Oven Broil Element is an OEM part for GE ovens. This element is located at the top of the oven cavity and is responsible for broiling, providing high heat for cooking tasks such as searing meats or browning the top of dishes.

Causes of a bad Oven Broil Element can include prolonged use, leading to eventual wear and tear, exposure to food spills and grease that can corrode or damage the element, and electrical issues that may cause it to fail prematurely.

Symptoms of a malfunctioning Oven Broil Element include:

The element not glowing red when the broil function is activated
Uneven cooking or browning of food
The oven taking longer than usual to broil
No heat production when the broil setting is selected

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Bake unit cracked and started glowing and sparking like the sun both elements replaced Steven S. • Somerset , KY • April 21, 2015

Easy fix. Both elements replaced while I was at it, so all new. Figured if one went the other was going to follow. CIRCUIT BREAKER OFF. Removed the back metal panel with my nut driver for the hex head screws. Note where the panel may slip under tabs for support. Remove slip on electrical connections on upper and lower elements. May need a pliers. (I did not want to just pull the element and the wires into the oven with the element and remove them there, like a technician would do. After 15... Read more

$54.36

Compare At:: $86.47
You Save:: $32.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Bake Element Kit

5.0 (101)

By: Whirlpool

Part Number: WPY04000066

The Range Element Kit is an OEM part for Whirlpool ranges. This kit typically includes elements used for heating the oven or stovetop, ensuring efficient and even cooking or baking. The element measures 16" wide and 16" from the mounting plate to the other side. The terminal depth is 3", and the total element length is 19". It is rated at 2100 watts and 240 Volts.

Over time, heating elements can become worn out or damaged due to repeated use, exposure to high temperatures, or electrical issues. A malfunctioning element can lead to uneven cooking, longer cooking times, or the range not heating up at all.

Symptoms of a bad Range Element include:

The element not heating up
Uneven cooking or baking results
Visible damage such as burns or breaks in the element
Sparks or electrical issues when the element is turned on

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Oven not heating evenly
Little to no heat when baking
Element will not heat

Do-It-Yourself Stories from Customers like You Oven heating element burned out. Andrew M. • Odessa , MO • February 06, 2021

The top part of our double wall oven quit working a couple years ago. We asked an appliance repair guy if he could find a replacement heating element and after a few days, he told us he couldn't. We switched to using the bottom and recently I started looking to purchase a new oven. On a whim, I decided to check the Interwebs and found several sites claiming to have the part that the appliance repair guy said didn't exist. I ordered from Appliance Parts Pros and a few days later the... Read more

$46.95

Compare At:: $66.32
You Save:: $19.37

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore 6 Inch Small Surface Element

4.9 (83)

By: Ge

Part Number: WB30M1

The 6-Inch Small Surface Element is an OEM part for GE cooktops and ranges. It is designed to provide consistent and reliable heat for cooking on the stovetop. This heating element fits into the designated slot on the cooktop and is used for preparing smaller dishes or for simmering.

You should replace the surface element if it becomes faulty. Causes of a bad surface element can include wear and tear from regular use, electrical issues, or damage from overheating. A malfunctioning surface element can lead to uneven cooking, insufficient heat, or the element not heating up at all.

Symptoms of a bad 6-inch small surface element include:

The element not heating up or only heating intermittently
Visible damage such as burn marks or deformation
Uneven heating or hotspots on cookware
The element not fitting securely into its slot

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Matching 8-inch surface element - WB30M2; terminal block - WB17X5113

Do-It-Yourself Stories from Customers like You Old and scarred burners and pans Kirk W. • Indianapolis , IN • March 22, 2015

Burners were an exact match for the originals and the pans fit perfectly. Vastly improved the appearance of an old cook top and allowed us to to not have to replace it before our home goes up for sale. Read more

$39.63

Compare At:: $61.80
You Save:: $22.17

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Dual Element

4.7 (44)

By: Frigidaire

Part Number: 316555800

The Dual Element is an OEM part for Frigidaire ranges. This element features two heating zones, allowing for versatile cooking options by providing both high and low heat settings on the same burner. It ensures efficient and consistent heating, making it ideal for various cooking tasks. It contains a 9-inch, 1200-watt element and a 6-inch, 1300-watt element, combining for 2500 watts at 240 volts

Causes of a bad dual element can include electrical issues, wear and tear from regular use, or physical damage such as cracks or breaks in the heating element. These issues can lead to inconsistent heating or complete failure of the element.

Symptoms of a bad dual element include:

Burner not heating up
Inconsistent or uneven heating
Element not switching between high and low heat
Visible damage to the element

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You The outer ring of the front left element would heat but the inner would not Larry G. • Flintstone , GA • December 17, 2019

Replacement of the element was relatively straightforward, but there are a couple of things to be aware of before you begin. First, turn off power to the stove at the breaker box. Allow the cooktop to raise by removing the two screws that secures it on the underside of the front edge. Open the oven door to do this. Removal of the old element is simple, just remove the two screws that secure the wide mounting bracket that holds the two front elements. Carefully turn the assembly over. To... Read more

$130.95

Compare At:: $154.52
You Save:: $23.57

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Oven Baking Element

4.9 (51)

By: Frigidaire

Part Number: 316225001

The Oven Baking Element is an OEM part for Frigidaire ovens. It is responsible for providing the necessary heat for baking and roasting by converting electrical energy into heat within the oven cavity. The baking element measures approximately 19.4 x 18.5 inches.

You should replace this baking element if it stops functioning properly, which can occur due to wear and tear over time, electrical malfunctions, or physical damage to the element.

Symptoms of a bad oven baking element include:

The oven not heating up properly or at all
Uneven baking or roasting results
Visible damage such as breaks or burn marks on the element

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Little to no heat when baking

Do-It-Yourself Stories from Customers like You Broken element Ted C. • Gloucester , MA • May 09, 2014

Replaced with new Read more

$120.95

Compare At:: $143.93
You Save:: $22.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore 6 Inch Small Surface Element

4.9 (130)

By: Whirlpool

Part Number: WP660532

The 6 Inch Small Surface Element is an OEM part for Whirlpool electric ranges and cooktops. This component is essential for providing consistent, controlled heat to cookware on the stovetop.

Symptoms of a bad 6 Inch Small Surface Element include:

Lack of heat production, with the element failing to warm up at all.
Inconsistent heating, where the element may fluctuate in temperature or only partially heat.
Visible damage such as blistering, bubbling, or cracks on the element's surface.
A tripped circuit breaker when the element is turned on, indicating a short.

Causes of a bad surface element can include prolonged use leading to element burnout, electrical faults such as faulty wiring or internal failures, and physical damage from impact or heavy cookware being dropped on the element.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

8-inch element is part number WP660533.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014

Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday. This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire... Read more

$28.25

Compare At:: $44.73
You Save:: $16.48

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Dual Element

4.9 (36)

By: Frigidaire

Part Number: 5304533520

The Dual Element is an OEM replacement part for Frigidaire electric ranges. This component is located on the cooktop surface and features two heating coils in one unit, one measuring 6 inches in diameter and the other 9 inches. It allows for precise control of cooking temperatures, accommodating various pot and pan sizes for more efficient cooking.

Causes of a bad dual element can include prolonged use that leads to wear and tear, electrical surges that can damage the heating element, or physical damage due to impact or mishandling. Over time, these issues can result in the element failing to heat properly or not working at all.

Symptoms of a bad dual element include:

The element not heating up or only partially heating
Inconsistent or fluctuating temperatures
Visible damage, such as burns or breaks in the element
The element not responding to temperature controls
Sparking or unusual noises when the element is in use

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Left front burner center coil did not work Jack P. • Leesburg , FL • September 12, 2016

We are very inexperienced appliance repair people. Thus check it out first to see if we can fixit...successs. First checked to be sure it wasn't the actual switch. Did this by numbering the wires and then switching the two switches b/w the right and left front dual burners. Success, the switch was fine but kinda disappointed cause this part was less expensive. Proceeded to then order the left front dual burner. Arrived in a few days, packed well. We unplugged the appliance, as it been a... Read more

$67.95

Compare At:: $80.18
You Save:: $12.23

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Oven Broil Element

4.7 (37)

By: Frigidaire

Part Number: 316203200

The Broil Element is an OEM replacement part for Frigidaire ovens. It is located at the top of the oven cavity and is responsible for providing the high heat required for broiling. This element heats up quickly and evenly to cook food from above, giving it a crisp and browned finish.

Over time, the broil element can degrade due to the high temperatures it operates under, as well as normal wear and tear from repeated use. Electrical surges or physical damage from cleaning or moving oven racks can also cause the element to fail. These factors can lead to the element no longer heating up properly or becoming completely non-functional.

Symptoms of a bad broil element include:

The broiler not heating up or heating unevenly
Visible signs of damage such as burns, blisters, or breaks in the element
Sparking or unusual noises when attempting to use the broiler
The oven taking longer to broil food or not achieving the desired browning effect
The element not glowing red-hot during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Oven wouldn't heat up Danielle B. • Virginia Beach , VA • March 17, 2015

Removed the bake element and broil element. Tested them with a multi meter. They failed. Ordered new elements. Received them in 2 days. Installed new elements. Oven works great. Entire fix took 10 minutes to remove and test elements, 10 minutes to install the new elements. It was my first time working on an appliance, the instruction videos were great! Read more

$117.95

Compare At:: $140.36
You Save:: $22.41

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Coil Burner Element

4.9 (98)

By: Frigidaire

Part Number: 318372211

The Coil Burner Element is an OEM replacement part for Frigidaire cooktops and ranges. The 6-inch coil burner element typically consists of a spiral-shaped metal resistance wire or rod that glows red-hot when electricity passes through it. This heat is then transferred to the cooktop surface, allowing it to reach the desired temperature for various cooking tasks, such as boiling, simmering, or sautéing.

Symptoms of a bad coil burner element:

Burner not heating up properly or failing to reach the desired temperature
Uneven heating or hot spots on the cooktop surface
Visible damage or breaks in the coil wire
Unusual smells or burning odors emanating from the burner area

Causes of a bad coil burner element can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore cooktops and ranges.

Do-It-Yourself Stories from Customers like You Needed new burners and drip pans John V. • Houston , TX • February 22, 2016

Ordered on Wed, received on Fri. Took less than 5 minutes to replace all 4. No tools needed. Read more

$40.44

Compare At:: $48.12
You Save:: $7.68

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore 6" Element

4.8 (53)

By: Frigidaire

Part Number: 318178110

The Surface Element is an OEM part for Frigidaire ranges. The small surface element is responsible for providing direct heat to the cookware placed on the corresponding burner of the electric cooktop or range. This element is typically located underneath the glass surface of the cooktop or range, ensuring efficient and even heat distribution for cooking.

Symptoms of a failing Surface Element include:

The element not heating up at all
Heating unevenly or only partially
Noticeable damage or blistering on the element itself
The control switch not regulating the temperature properly

Causes of a bad surface element can include a burnt-out coil, a break in the element's continuity, or problems with the connection points such as corrosion or loosening. Regular wear and tear from cooking can also lead to degradation over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Oven surface element went bad Shahlokh K. • Van Nuys , CA • September 21, 2014

Very easy. go online learn how to change the element step by step. order the part and you are all set. I saved $99 of labor cost. Read more

$91.72

Compare At:: $108.23
You Save:: $16.51

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Oven Broil Element

4.9 (122)

By: Whirlpool

Part Number: W10201551

The Oven Broil Element is an OEM part for Whirlpool ovens. It is responsible for providing the necessary heat for broiling, ensuring that food is cooked evenly from above.

Causes of a bad broil element can include electrical malfunctions, wear and tear from regular use, or damage from high temperatures and thermal cycling over time. These issues can impair the element's ability to heat properly.

Symptoms of a bad broil element include:

The broil element not heating up
Uneven cooking or broiling results
Visible damage, such as blisters or breaks in the element
The oven not reaching the desired broiling temperature

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: If you are unable to use your old connectors, order part number TJMA02875-1.

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Upper element in top oven burned out D M. • Pittsoboro , NC • April 03, 2016

The upper element in the top oven burned out. This was likely due to sugary food that had gotten on the element when the food was moved in/out of the element. The element was coated in crusty, burned food and the element was cracked in six or so places. The oven is a Maytag Gemini double oven range. The model number appears to be MER6875AAQ based on our receipt and manual. We did not pull out the oven since it is difficult to do so in our kitchen. Taking out the old element only... Read more

$52.32

Compare At:: $62.78
You Save:: $10.46

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Kenmore / Sears Heating Element

Kenmore Heater Assembly

Kenmore Bake Element

Kenmore Bake Element

Kenmore Oven Broil Element

Kenmore Dryer Heater Assembly

Kenmore Oven Broil Element

Kenmore Bake Element Kit

Kenmore 6 Inch Small Surface Element

Kenmore Dual Element

Kenmore Oven Baking Element

Kenmore 6 Inch Small Surface Element

Kenmore Dual Element

Kenmore Oven Broil Element

Kenmore Coil Burner Element

Kenmore 6" Element

Kenmore Oven Broil Element

Appliance Type

Popular Kenmore Models