Kenmore / Sears Refrigerator Drawer, Shelf, Pan

The new slides fit perfectly. One thing to mention is that the slide rails come with the slide bearings so you do not need to buy those separate. When I called I was told I needed the bearings so I bought 3 assuming I would be able to salvage the others. Turns out I did not need them. Read more

Put racks to together and put into fridge Read more

We replace them I order wed moring and I got Thursday afternoon I was very happy got them quick Read more

They are easily replaced with no tools. Read more

I replaced the bar and rack support. It was fairly easy. I measured the shelf and cut the bar to size. Then I inserted the bar into the shelf support and the inserted the bar and supports into the slots on the left and right. Thanks Appliance Pros for the fast delivery and the exact items that were ordered. Read more

Ordered replacement parts. Read more

Repair took 20 minutes - 1 minute to set the new, non-broken shelf in place, and then 19 minutes teasing my spouse about the fragility of glass and multiple repetitions of the phrase "This is why we can't have nice things!" Probably worthwhile to program in 10 additional minutes to allow you to apologize to your spouse for ridiculing them for an honest mistake:) Read more

Easy to replace with the shield and paddle assembly. Steps are: 1. use a flat head screwdriver to push the tabs at the base of the control panel. remove the wire connectors by gently prying them straight off. 2. remove the 4 phillips screws holding in the old assembly. 3. Install the new assembly by carefully putting the paddle behind the water pipe that sticks out. You may have to push the paddle one way to get it around the pipe and then back into place. 4. reinstall the screws. 5. reconnect... Read more

Ordered left and right side supports and they arrived in two days! It took me longer to get stuff out of the way in the fridge so I could take the shelf out than it did to actually swap out the side supports. Parts fit perfectly and quick easy repair. Read more

Ordered replacement drawer, new drawer was an exact replacement even though the part number had been changed. Read more

Looked at the provided video. PERFECT results. Read more

Replace them. Out of two shelf guards 1 was broken Read more

Pulled out storage bin Removed side track rail covers Popped off gear from holding clip Installed drive shaft Installed rail cover and storage bin Only took about 15 minutes Read more

Easy to replace with the shield and paddle assembly. Steps are: 1. use a flat head screwdriver to push the tabs at the base of the control panel. remove the wire connectors by gently prying them straight off. 2. remove the 4 phillips screws holding in the old assembly. 3. Install the new assembly by carefully putting the paddle behind the water pipe that sticks out. You may have to push the paddle one way to get it around the pipe and then back into place. 4. reinstall the screws. 5. reconnect... Read more

No instructions are included with either piece, which makes installation take more time and care. Tools needed: Small standard flat blade screwdriver, box knife or other knife with at least a 2" long blade, super glue. Remove the old main crisper frame: 1. Remove old main frame by lifting upward and outward. 2. Remove the center rail from the frame. May require bending of the main frame to remove it. 3. Remove the crisper front panel by unsnapping from frame. This is easily done by... Read more

Ordered the plastic glides that connect to the metal rails. Super easy fix! Read more