Need Help?
Call or text
The Surface Element is an OEM replacement part for Frigidaire electric ranges, designed to provide efficient and even heating for cooking on the stovetop. This component is a radiant surface element commonly seen on glass and ceramic cooktops. 8 inch, 2200 watt
Causes of a faulty Surface Element can be due to overuse causing burnout, physical damage like cracks from heavy cookware, electrical issues such as faulty wiring, and corrosion disrupting heating.
Symptoms of a bad Surface Element include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Changed element Read more
This electric heating element restores consistent, reliable heat in your appliance, so cooking or warming functions work as intended. Replace a failed element to eliminate slow heat-up, uneven temperatures, or no-heat conditions.
Turned off power to oven. Removed the oven door. Unscrewed and removed the metal plate. Pulled element off wires and attached them to the new element. (This took needle nose pliers and many attempts. Needed dexterous fingers and good eyesight.) Put everything back. Read more
Oven won't ignite or clicks but doesn't light? This bake burner with spark igniter fixes grounding issues and ignition failures. Easy DIY repair.
Replaced igniter under oven floor panel. Read more
Broiler not heating or browning food? A faulty broil element is often the cause. Located at the top of the oven, this part restores even heat for broiling.
Cut off power ,inside I remove the two back screws, remove the two front screws with hangers. Pull element out, clip wires so they don't fall back in holes with clothes pins. worked good. But wire connection to the broiler was to large, had to replace connectors, wire fell in hole, had to pull wall oven out and remove back panel. I then mounted the new element to oven. Replaced connectors ,connected connectors, closed back panel, put oven in place ,connected power lines. Turned power on. Works... Read more
Seals the light lens to the oven cavity, blocking heat, steam, and grease from the bulb housing. Replace if cracked, brittle, or missing. Confirm fit.
Troubleshot the oven by checking the broiler which worked good (same fuel valve). After reading the some tips about troubleshooting the Glow Ignitor I could see the broiler ignitor got white hot and the oven ignitor only got bright orange (orange to red causes intermittent ignition or mini explosions). Watched the how to video and it was good information. You should be observant about which openings in the back of the oven as to where the two wires are coming out of. My oven is over 12 years... Read more
Broiler won't heat or element burned out? This upper broil element restores intense top-down heat for even browning. DIY-friendly repair in under an hour.
I wanted to get the upper oven baking element replaced; it hasn't been working for a few months. This double oven has had two other issues, there is a fan that comes on to cool the electronics panel, That fan has made excessive noise and it operates for 2-3 hours after the oven turns off. The other problem with the oven is the Self-Cleaning feature runs for about 15-30 minutes and then turns off with an error code. I've had a local appliance repair person in to address the error code and... Read more
Burner cap sits on top of the gas burner assembly to distribute flame evenly. Replace if cracked, chipped, discolored, or missing for proper cooking.
I thought it was the burners and ordered four burners. When they arrived I thought three of them were wrong parts so I ordered three others and scheduled a return of three I had just received. I then realized it was not the burner but the diffuser plated on top of the burners. I cancelled the new order, arranged a return of the four initial burners and ordered four diffuser plated. The representatives were extremely helpful; and understanding. I was amazed adn happy that there was no... Read more
Burner not heating or stuck on? This surface element switch controls power to individual cooking elements. Moderate DIY repair requires lifting cooktop.
Burner won't light or takes multiple attempts? This gas range igniter provides reliable spark to ignite your burner. DIY-friendly fix restores consistent starts.
Replaced all ignitors. Read more
This surface burner ignitor/orifice assembly directs gas through a calibrated orifice and provides the spark to ignite it. Replacing a worn or damaged assembly restores consistent lighting and an even flame on the affected rangetop burner.
I replaced the Ignitor/Orifice Tube assembly. Read more
Burner not heating or heating unevenly? This surface element restores consistent heat for boiling, simmering, and sautéing. DIY install in 45 minutes.
The instructions that came with the replacement smaller surface heating element provided no help about how to open the top of the range, so I checked the internet. I found several videos on replacement of surface elements in flat top ranges, but none for our particular range, so I Google-searched a simple question, “How to open the top of a 6898VVD Magic Chef range”. The AI Overview answer had several points, most of them not useful, except for the last one: “Hidden Clips: There might be... Read more
Seals oven door to contain heat and maintain cooking temperatures. Replace when frayed, flattened, or leaking heat. Confirm fit with your model number.
The exact part for my oven door was out of production{old oven} and i could not find it at our local appliance parts stores or at G.E. online. But with the help from your great staff and some wait time on the phone i got a perfect gasket to replace the worn-out product i had on my oven door. i was really skeptical about finding any thing to replace these burnt out gasket and was quite surprised after a few minutes on hold your tech came up with the exact fiit . thank you and your staff very... Read more
Burner not heating or heating unevenly? This 6-inch surface coil element restores consistent heat to your range's small burner. Simple plug-in install.
Ordered new heating coils for stove Read more
Fix an oven that won't heat or takes too long to reach temperature. This bake element generates consistent heat during the bake cycle. Easy DIY repair.
I first tried to purchase the part directly from GE but they were not helpful at all. Remembering that I had purchased a transmission and other parts from appliance parts pros for my old Maytag washer before, I searched their easy-to-use parts catalog and there it was!!!! I asked for confirmation from Customer Service and after 2 says Research confirmed that it was the correct part. Replacing the element was quite simple following the very helpful diagrams on their website. Thank you so very... Read more
Replace your broken, cracked, or missing range top burner control knob. Installs on the control panel to adjust surface element temperature settings.
I got on the internet and found AppliancePartsPros.com. I called and talked to a gentleman in the parts department. He was very knowledgeable about the part I needed and was helpful in placing the part order for me. He also told me about a feature AppliancePartsPros.com had, the video to help customers replace their parts. Great for diy customers. Another great thing about my order was , I place my order early one morning and I received the part the very next day. GREAT SERVICE!!!!!!!!! Will... Read more
Replace your cracked, melted, chipped, or missing gas cooktop control knob. Fits securely on the control shaft to adjust burner flame settings.
I replaced the drip pans, grates, knobs, grease filter and downdraft grate. I have a new stove top! All for a fraction of the cost of a new one. Read more