Kenmore / Sears Washer Tub Or Basket

This outer tub is the large stationary tub that holds water for the washer and supports the inner wash basket. It restores a watertight enclosure and structural support so your washer can fill, agitate, and drain properly. What it does:

• Forms the watertight basin that contains wash water and directs it to the drain
• Supports the inner tub/basket and helps keep the basket aligned during cycles
• Prevents water from leaking into the cabinet when intact
• A cracked, warped, or corroded outer tub can cause visible leaks, loud or uneven operation, and washer shutdowns

• One outer tub

• Disconnect power and water supply before beginning any repair
• Drain remaining water and remove the washer top/lid and control panel as needed to access the tub
• Support or remove the inner tub/basket per service manual instructions to avoid damage during removal
• Inspect and replace related seals, gaskets, and clamps as needed

Note: Bearings are only available with the gearcase assembly.

This replacement silverware/cutlery basket holds utensils securely during dishwasher cycles to keep items organized and allow thorough cleaning. Durable molded plastic resists staining and lets water and detergent reach utensils for better wash performance. What it does

• Holds forks, knives and spoons in place so utensils don't fall through the lower rack
• Allows water and detergent to circulate around cutlery for improved cleaning
• Helps prevent scoring and nesting of utensils for more even washing
• Restores organization to the dishwasher's lower rack when the original basket is cracked or missing

• One replacement silverware/cutlery basket

• No special tools required; simply set the basket into the lower dishwasher rack
• Handle carefully to avoid sharp utensils during installation
• Follow dishwasher manufacturer's safety instructions and disconnect power if recommended before servicing

This is an outer tub for washing machines. The outer tub and holds the inner tub and makes sure water doesn't leak into the rest of the appliance. A damaged outer tub will often make loud noises and could cause leaks.When replacing the outer tub, make sure the washing machine is unplugged and the water supply is turned off. Remove the control panel before disassembling the washing machine to get access to the outer tub. Tap the drive block and disconnect the outer tub before pulling the hose free and removing the suspension springs. The new part can be installed in the new place before turning the power and water back on. This outer tub is made for use with washing machines and washer and dryer combination appliances made by Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Magic Chef, Admiral, Roper, Crosley, Inglis, and Estate. This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as a single part.

This balance ring mounts on the top of the washer's spin basket. Its sealed, liquid-filled chamber shifts weight to counterbalance uneven loads so the tub spins smoothly, reducing vibration, noise, and stress on other components. What it does:

• Uses internal fluid to counterbalance heavy or uneven loads during spin
• Helps minimize vibration, shaking, and thumping noises
• Reduces washer movement or "walking" during spin
• Common failure symptoms: excessive vibration/noise, frequent out-of-balance loads, or visible cracks/leaks at the ring

• 1 balance ring assembly

• Disconnect power and water; wear gloves and use proper safety precautions
• Access the ring by removing the cabinet/top and inner basket (procedure varies by model)
• Remove the old ring; seat the new ring evenly on the basket rim—do not puncture the sealed chamber
• Reassemble, level the washer, and run a test spin to ensure smooth operation

This silverware basket replaces a cracked, broken, or rusted utensil holder so forks, knives and spoons stay upright and separate for better cleaning and safe unloading. Easy to snap into the dishwasher lower rack. What it does

• Holds silverware and small dishwasher-safe items securely during wash cycles.
• Keeps utensils separated to reduce nesting and improve water circulation and cleaning.
• Replaces baskets with broken tabs, holes, or rust that allow utensils to fall through.
• Helps prevent scratches by keeping metal utensils contained and away from delicate items.

• Disconnect the dishwasher from power before servicing.
• Slides into the lower rack location; no tools usually required.
• Inspect rack tracks and support clips; replace if damaged to ensure proper fit.
• Handle edges carefully if basket is damaged to avoid cuts; dispose of failed basket properly.

Kit Includes Front & Rear Outer Tubs with bearing Plus One Gasket. Bearings not available seperate.

Note: Comes with rear bearing (not available separately)

Outer tub assembly includes: outer tub, tub seal, drive shaft and bearings. To rebuild the tub, order the bearing and tub seal kit W10435302 and the bearing installation tool W10447783.

This Tub-Outer is the washer's main outer wash tub that holds water and supports internal components. Replacing a damaged outer tub restores the washer's water containment and prevents leaks that can damage floors and electronics. What it does:

• Houses the inner tub and creates the sealed wash chamber for water and detergent
• Keeps water contained during fill, wash and spin cycles
• Prevents leaks or puddling when the outer tub is intact
• A cracked or warped outer tub can cause visible leaks, water on the floor, or washer shutdowns

• Disconnect power and water supply before servicing; drain remaining water from the machine
• Outer tub replacement often requires removal of the cabinet, transmission/drum assembly, or transfer of bearings/seals—follow OEM instructions
• Use proper lifting assistance; the tub assembly may be heavy and awkward to handle