Kitchenaid Dishwasher Parts

It was a learning experience. First I turned off the power! I removed the lower kick plate, disconnected the drain hose and electrical connectors. Then removed the discharge pump and heat sensor then loosened the 4 hold down arms/clamps. Then I opened the door and pulled the base up from the inside. Now to remove and replace the Pump Motor. Then reverse the process. If I were to do again, I'd pull the dishwasher out and lay it on its back. Read more

Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down. Read more

Ordered numerous replacement parts. Started with the tracks which required pulling the washer out of the cabinet to reach the screws. Pushed it back in and re-secured. Then stared on the rack and replaced the rack adjusters and various clips. Everything is straight forward and easy to replace. I originally called a local repair place to have them repair it. They came out and said they needed to order parts and they would call back. A week went by and I followed up with them. Had to leave... Read more

Just replaced the things. Had to reuse old tine rows, rollers, the spray arm, etc., i.e. I removed 'em from the old racks and put on the new ones, but that was piece of cake. Also, I cleaned the food grinder and the discharge valve compartment (thank you very ???? ???? much, Internet), so spray arms around the top rack get enough water pressure now. I didn't have to buy any parts for the latter part of this little repair project, though. Read more

This was a difficult problem to diagnose. Because the machine would start the wash cycle then shut down after a few minutes of running, it appeared that the cause might be a bad thermostat or heating element, but all checked out ok. That led me to believe that the control panel may be the culprit but it also appeared to be working correctly when I ran the diagnostics program. A visual examination of the components found that the door switch electrical connections looked discolored, so I removed... Read more

Ordered replacement part, snapped into place, easy repair. Read more

Slide diswasher out to reach the two screws that hold rollers. Reverse prcess, all done. Read more

Replace the diverter. Read more

My dishwasher quit cleaning dishes and lost all pressure. The food screen would keep clogging up and I would have to take it out and clean it by hand. After putting a new impeller in, the "gears" on the impeller connected with the screen blades, the old impeller the "gears" were stripped off. And the new impeller comes with new seals, after taking old one out I noticed it wasn't long before my old seals would have started leaking. Very simple repair if you watch the great video that... Read more

Dishwasher needed to be disconnected from power and water supplies, removed from the cabinet and placed on it's back to gain free access to the underside of the unit. The motor-pump unit removed ( just three screws and two wire connections ). Once the motor unit is removed, the filter-pump part 'rests' on the end of this unit and just lifts off. The new part is put in place and the motor is re-attached, minding to make the metal support arm goes back inside the rubberized carrying slot and... Read more

I hated to call a repair Guy, because by the time it takes them to do the service call and then order the part, then schedule another appointment. It would be at least two weeks. I figured I would just buy a new Dishwasher and have it delivered the next day. That was before I saw the price of a new dishwasher. I looked on line and found Appliance Parts Pros, saw the you tube video figured a trained monkey could do this change out on the motor assembly, so why can't I. I ordered the complete... Read more

Had my kitchen renovated and my contractor lost the access panel for my Whirlpool dishwasher so I had to find a replacement. Found what I was looking for at AppliancePartsPros.com, chatted with a sales customer service rep to make sure it was the correct part. Ordered it, paid for standard shipping, which said 2-3 days, it arrived at my house the next day! The part was also a genuine Whirlpool replacement part, not a generic part that "should" fit, needless to say, it fit perfectly and... Read more

Ordered the new parts which arrived on time. The entire repair took about 10 minutes. Read more

Ordered front panel and panel control. Also ordered name plate (did not need) front panel already has it. My husband and I had it switched out in approx 10 minutes. Took longer to gather proper tools than it did to do the repair. Looks awesome and original! Read more

The odor in the dishwasher was due to scum buildup in the walls, the racks, and in the lower part of the drain below the lower rotating arm. One of the valves in the vertical tube was stuck in the open position; since the valves cannot be replaced, the entire tube needed replacement. The check valve probably needed no replacement, but once I opened the bottom part, I decided to replace it anyway. I used this Youtube video to replace the tube, open and clean the drainage part of the washer: ... Read more

After reviewing the other repair stories related to this "7 blinking light" syndrome, I contacted their support staff via Chat. I relayed my symptoms along with model number of dishwasher. She indicated that this would normally mean an issue with either the heating element, the high limit thermostat, or the control board. Since the control board was so expensive and (luckily) out of stock, I ordered only the heating element and the thermostat. After pulling out the dishwasher and removing... Read more