Maytag Parts

This center ladder is a replacement interior support piece that helps secure and align related shelving components for proper fit and function. Replacing a worn or broken center ladder restores stable shelf support and alignment. What it does

• Provides centered structural support for the associated shelving/ladder assembly
• Restores proper alignment so shelves and components sit securely
• Stops movement, sagging or misalignment caused by a cracked or damaged ladder
• Fits into the factory ladder location to maintain original spacing and support

• One center ladder

• Install with the appliance power off and remove any stored items from the area before starting
• Verify orientation and engagement points match the existing ladder prior to final fastening
• Use only the specified fasteners and torque per manufacturer guidance; do not overtighten plastic mounting points

This mounting bracket secures and supports internal appliance components to keep assemblies aligned and reduce vibration. A simple replacement that restores proper fit and stops rattling or loose panels caused by a broken or bent bracket. What it does

• Provides a rigid anchor point to hold panels, assemblies or hardware in place
• Keeps components aligned to prevent rubbing, vibration and noise
• Restores proper fit where a worn or damaged bracket caused gaps or looseness
• Helps maintain safe operation by preventing parts from shifting during use

• One mounting bracket

• Disconnect power (unplug appliance or turn off circuit) before starting any repair
• Basic hand tools (screwdriver, nut driver) typically required; retain removed fasteners for reassembly
• Handle edges carefully; metal parts may be sharp
• for exact bracket location and proper reassembly

The Storage Bin is an OEM part for Whirlpool refrigerators. It provides organized, adjustable storage space in the refrigerator door. The bin has been designed to hold condiments, beverages, snacks, and other small refrigerator items. 

Causes of a bad storage bin can include broken hinges or mounting clips, cracks or holes in the plastic material, or a bent or warped bin that no longer sits securely or organizes items well.

Symptoms of a bad storage bin include:

• Items falling out of the bin 
• Bin not sitting flush or securely in the door
• Difficulty removing or replacing the bin
• Cracked or damaged plastic that affects functionality

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Snack Pan is an OEM part for Whirlpool refrigerators. It provides a designated space for storing snacks and small items within your refrigerator.

A bad snack pan can be caused by regular use, accidental damage, or exposure to spills and stains. If you notice cracks, discoloration, or a broken structure in the snack pan, it may indicate a problem with the pan itself.

Symptoms of a bad snack pan include:

• Cracked or damaged pan surface
• Discoloration or staining of the pan
• Inability to open or close the drawer

Replace your faulty snack pan with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Utility Pan is an OEM part for Whirlpool refrigerators. It is a storage drawer for various items in your refrigerator, such as deli meats, cheeses, and other small food items.

A bad utility drawer pan can be caused by regular use, accidental damage, or wear and tear over time. If you notice cracks, breaks, or warping in the pan, it may be time to replace it.

Symptoms of a bad utility drawer pan include:

• Cracks or breaks in the pan
• Warping or misalignment of the pan
• Difficulty in opening or closing the drawer

Replace your damaged or worn-out utility drawer pan with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This bin control lever replaces the small latch that secures a refrigerator door bin so the bin stays in place and releases correctly. Restores proper bin retention for safe, organized storage. What it does:

• Secures the door bin to prevent it from falling or shifting when the door opens
• Engages/disengages the bin latch so the bin can be removed or reinstalled smoothly
• Helps eliminate rattling or loose-feeling door bins
• Common symptom: bin drops, won't lock in place, or feels loose when nudged

• Remove the door bin and inspect mounting area before installing the lever
• Snap or screw the lever into the existing mounting point per OEM alignment—do not force
• Handle glass or plastic bins carefully to avoid damage during reassembly
• Disconnect power only if required for your model; for safety guidance

This shallow freezer door bin mounts on the inner door and restores organized storage for smaller items. Replace a cracked, loose, or missing bin to keep packages secure and easy to access.

• Creates a dedicated shelf on the freezer door for boxed or bagged foods
• Replaces bins with cracked plastic, broken locking tabs, or discoloration
• Helps prevent items from falling when the door opens and closes
• Restores a secure fit if the original bin won't seat or keeps popping off

• Empty and remove the old bin by lifting up to release it, then pulling out
• Align the new bin with the door liner slots and press down until fully seated
• Handle plastic carefully; install at room temperature to reduce risk of cracking
• No tools typically required; match position and orientation to the original bin

This basket front replaces the plastic panel on the front of a freezer wire basket. It restores a solid barrier so food stays contained and helps the basket slide in and out smoothly.

• Attaches to the front of the freezer wire basket to create a secure face
• Helps prevent items from falling out of the basket
• Replaces cracked, warped, or missing fronts
• Can improve basket handling and alignment when opening/closing

• Unplug the refrigerator before servicing
• Remove the basket from the freezer and place on a flat surface
• Release the damaged front and align the new front with the basket wires; press until fully seated
• Reinstall the basket and verify smooth operation

Note: Right Side

Note: Left Side

A replacement ladder shelf support that holds and stabilizes a refrigerator shelf or bin track so stored items stay level and secure. Restores proper shelf alignment and prevents shifting or sagging. What it does:

• Supports and aligns a refrigerator shelf or bin track to keep items stable
• Replaces broken, bent or cracked ladder pieces that cause shelves to tilt
• Helps stop shelves or bins from slipping forward or coming loose
• Compatible with common Whirlpool refrigerator shelf mounting points

• Disconnect power or unplug the appliance before starting any repair.
• Remove shelves or bins as needed to access the ladder; handle glass shelves carefully.
• Use basic hand tools; avoid forcing parts—inspect for damaged mounting clips or guides.

This replacement freezer bin restores a missing, cracked, or worn freezer storage drawer so you can keep frozen foods organized and contained. Fits behind the freezer door and rehabs normal shelf/drawer function. What it does:

• Holds and organizes frozen food items inside the freezer compartment
• Replaces cracked, broken, or warped drawer bins that no longer slide or seal
• Helps prevent items from falling onto lower shelves and improves access
• Compatible with oven/freezer drawer tracks and slides used by the OEM design

• Remove all contents and unplug or switch off the appliance power before service
• Slide out existing bin and lift to disengage; align new bin on tracks and slide into place
• Inspect rails and guides for damage; replace any damaged hardware separately

This front pan is the replacement cabinet front that restores the appliance's exterior fit and finish and helps protect internal components from debris and moisture. It's a direct-fit OEM-design panel for a proper appearance and protection. What it does:

• Replaces a cracked, dented, or rusted front panel to restore the appliance's exterior appearance
• Protects internal components and openings from dust, spills, and physical damage
• Helps maintain proper alignment of the door and control openings
• Prevents drafts and reduces the chance of moisture reaching internal parts

• One front pan

• Disconnect power (and water if applicable) before starting any repair
• Removal typically requires loosening fasteners and gently lifting the old panel out of retaining slots; keep track of screws and clips
• Handle the new panel carefully to avoid scratching or denting during installation

This freezer basket holds and organizes frozen foods inside your refrigerator freezer, keeping items accessible and preventing loose product from shifting. Durable molded construction fits into the freezer compartment for reliable storage. What it does:

• Provides a removable storage bin to organize frozen items and maximize usable freezer space
• Keeps small or loose packages contained so they don't fall behind shelves
• Makes loading and unloading faster by grouping items in one accessible tray
• Visible, open-top design helps you see contents at a glance

• One freezer basket

• Always unplug the appliance or disconnect power before servicing
• Remove all food and empty the freezer compartment before installing
• Slide basket into existing guides or supports until it seats securely; no special tools generally required
• Inspect mounting rails or supports for damage and replace if worn to ensure proper fit

A refrigerator chiller assembly that helps keep the deli or meat drawer colder than the main compartment so foods stay fresher longer. Fits in the freezer-to-fridge airflow path and restores proper low-temperature cooling where designed. What it does:

• Circulates cold air to the chiller/deli compartment to maintain lower temperatures for meats and produce.
• Restores targeted cooling when the original chiller is cracked, clogged, or not directing airflow properly.
• Helps correct uneven temperatures between compartments that can cause premature spoilage.
• Works with the refrigerator's evaporator and air channels to balance compartment cooling.

• One chiller assembly as shown

• Disconnect power before attempting any repair to avoid electrical hazard.
• Access typically requires removing interior panels and may involve disconnecting a few fasteners or vents; handle plastic parts carefully to avoid breakage.
• If the chiller attaches to ducting or the evaporator cover, ensure seals and clips are properly seated to prevent air leaks.