Maytag Parts

This is for the right hand side

This pantry slide assembly restores smooth, secure sliding for a refrigerator pantry shelf so you can access stored items easily and prevent tipping. Direct-replacement part designed to match original fit and function. What it does:

• Replaces a worn or broken pantry slide so the pantry shelf opens and closes smoothly.
• Prevents pantry shelves from binding, sticking, or falling out when pulled.
• Restores proper alignment and stopping action for safer loading and unloading.
• Helps eliminate rattling or uneven movement caused by damaged slide components.

• Disconnect power to the appliance or unplug before beginning any work.
• Installation generally requires removing pantry shelf and snapping or sliding assembly into the existing mounting points; keep original fasteners if present.
• Avoid forcing components; inspect mounting brackets and catches for damage and replace if needed.

This upper basket is the dishwasher rack insert that holds plates, glasses and small items in the top rack so they stay organized and get a proper wash. It replaces damaged or warped upper baskets to restore secure loading and water flow. What it does:

• Provides stable support for glasses, bowls and lightweight dishes in the upper rack
• Keeps items separated to improve cleaning and reduce chipping
• Restores proper alignment and routing of water to top-rack items
• Replaces cracked, bent or missing upper basket sections that allow items to tip or fall

• Disconnect power to the dishwasher before servicing and turn off the water supply if needed
• Remove the upper rack to access and swap the basket; no special tools are normally required
• Inspect rack rollers and tracks while re-installing the rack to ensure smooth operation
• If clips or fasteners are present, reinstall them as shown in the manufacturer's instructions

This upper basket replaces the dishwasher's top dish-holding basket to restore secure loading of glasses, cups and small items. It keeps items positioned for cleaning and prevents contact with the spray arms. What it does:

• Holds and organizes dishes and glassware on the top rack for proper wash coverage
• Keeps items upright to reduce tipping, chipping and blocked spray paths
• Replaces a cracked, bent or missing upper basket that causes dishes to shift or rattle
• Helps maintain proper water and detergent flow to upper-rack items

• Disconnect power and water supply to the appliance before starting any service
• Remove the upper rack from the tracks to access and replace the basket
• Re-seat the basket securely and verify the rack moves freely on its rails without binding
• Use OEM hardware and follow the dishwasher manufacturer's instructions for reassembly

This left-side freezer glide helps the freezer drawer slide smoothly and stay aligned, restoring proper drawer movement and preventing binding or sagging. Fits the freezer drawer track and supports normal opening and closing. What it does:

• Guides and supports the freezer drawer on the left side for smooth travel
• Keeps the drawer aligned to prevent scraping, sticking, or uneven movement
• Reduces chatter and wear on the drawer and track from improper seating
• Common symptom: drawer sticks, drags, or drops on one side when opening

• One left-side freezer glide

• Disconnect power before working on the appliance and remove food from the drawer area
• Remove the freezer drawer per the manual to access and replace the glide
• Use basic hand tools as required; avoid forcing parts to prevent breakage

This replacement freezer basket restores organized frozen storage and keeps items contained for easy access. It fits in the freezer compartment and provides a removable tray for holding packaged foods and loose items. What it does:

• Holds and organizes frozen food so items stay separated and accessible
• Prevents small items from falling into hard-to-reach areas of the freezer
• Replaces a cracked, bent, or missing freezer basket to restore usable storage
• Reduces rattling by keeping loose items grouped together

• Remove food from the area before installing to avoid spills or contamination
• Slide the basket into the freezer rails or ledges until it rests securely; no special tools usually required
• Inspect mounting rails or clips for damage and replace them if the basket does not seat properly
• Clean with mild detergent and dry thoroughly before returning food to the basket

This Support is a replacement mounting bracket that stabilizes and secures appliance components for reliable operation. Restores proper fit and helps prevent movement or misalignment that can cause noise or part wear. What it does:

• Provides a secure mounting point for associated panels or components
• Helps keep moving parts aligned to reduce rubbing, vibration, or rattling
• Restores original fit when a worn or broken support causes looseness
• Suitable when a damaged bracket is visible or when parts shift out of place

• One Support

• Basic hand tools required; disconnect power and water before starting
• Inspect surrounding fasteners and replace any that are stripped or damaged
• Tighten to OEM torque if specified in manufacturer instructions; avoid over-tightening

This pan assembly sits under the appliance tub or base to catch and direct water away from internal components, helping contain leaks and prevent water damage. It replaces a damaged, cracked or warped pan. What it does:

• Collects and channels leaking or overflowing water away from electronics and flooring
• Restores the appliance's original drip containment and sealing surface
• Helps stop visible water pooling beneath the appliance
• Supports proper routing to drain points when used with the factory drain path

• Disconnect power and water supply before starting any repair
• Remove access panels and any components blocking the pan
• Handle carefully; edges may be sharp and gaskets or clips can be brittle with age
• Secure any fasteners, hoses, or seals to prevent new leaks

This support holds and stabilizes an appliance component to keep parts aligned and reduce vibration for reliable operation. It's a simple replacement that restores proper fit and function where a worn or broken support causes issues. What it does:

• Secures and aligns adjacent components or assemblies to prevent shifting during use
• Stabilizes moving parts to reduce vibration, noise, and rubbing
• Helps maintain sealing and clearance to avoid wear or interference
• Commonly replaced when cracked, broken, or missing and causing rattling, misalignment, or instability

• One support as shown

• Inspect surrounding clips and fasteners; replace any that are damaged
• Use correct screws or hardware and tighten to OEM torque where specified
• Disconnect power and follow safety guidelines before working on the appliance

This trim is the finished control-panel surround that restores the appliance's exterior appearance and helps protect internal controls from spills and debris. It fits into the front console area to provide a clean, factory look. What it does:

• Replaces a cracked, scratched, or missing control-panel trim to improve appearance
• Helps shield buttons and display edges from moisture and dirt
• Restores proper alignment and fit of the front console components
• Useful when trim gaps or cosmetic damage expose internal parts

• Disconnect power to the appliance before starting any work to avoid shock or injury.
• Remove adjacent trim or bezels as needed to access mounting screws; keep fasteners for reassembly.
• Handle trim carefully to avoid scratching the finish; align clips/tabs before securing.
• Replace any damaged or missing clips or screws to ensure a secure fit.

This rail secures and guides the washer lid, restoring proper lid alignment and smooth opening/closing. Replaces a worn, cracked, or loose lid rail to reduce rattling and prevent the lid from catching during use. What it does:

• Provides a stable mounting surface for the washer lid so it opens and closes evenly
• Guides lid movement and helps prevent misalignment or binding
• Reduces noise and rattling caused by a loose or damaged rail
• Helps keep the lid seated correctly to prevent accidental gaps or snags

• Typical install requires removing the top or accessing the lid hinge area; retain original fasteners unless replacements are provided
• Disconnect power to the appliance before starting work to avoid injury