Maytag Hose Or Tube

The Drain Tube is an OEM part for Whirlpool-brand French door refrigerator water dispensers and ice makers. It channels excess water away during the icemaking process. 

Causes of a bad drain tube can include mineral buildup clogging the narrow opening over time or cracks developing from rigid ice contact every cycle.

Symptoms of a bad drain tube include:

• Water failing to properly drain away from the ice maker
• Puddles or leaks appearing near the freezer floor   
• Ice production deteriorating due to water backup
• Mineral scale deposits accumulating around connections

Replacing it with this OEM tube restores full water ejection to produce clean ice. Also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators.

The Water Line is an OEM part for Whirlpool refrigerators. As a component of the refrigerator's internal plumbing system, this water line connects the water filter housing to either the ice maker or water dispenser valve. 

Causes of a bad water line can include kinks, cracks or splits developing over time from normal use and vibration inside the refrigerator walls. Mineral deposits may also cause restrictive buildup within the line.  

Symptoms of water line issues include:

• Slow or interrupted water/ice production  
• Water leaks near the connections
• Mineral/foreign debris appearing in ice or dispensed water
• Water filter or valve malfunctions

This OEM replacement line is compatible with many Whirlpool, Kenmore, KitchenAid and other refrigerator brands.

This replacement hose routes water where the appliance needs it, helping restore proper filling and draining to prevent leaks or poor performance. Designed to match the original fitting and flow path for a reliable repair. What it does:

• Directs water between components to enable normal fill and drain cycles
• Prevents leaks when properly connected and clamped
• Restores proper drainage and prevents standing water or slow emptying
• Helps stop symptoms like intermittent filling, error codes related to water flow, or visible leaking

• Disconnect power and shut off the water supply before servicing
• Inspect and replace any worn clamps or fittings for a secure seal
• Route hose as original to avoid kinks and ensure proper flow

This water inlet hose directs incoming water into the appliance for normal operation, providing a reliable pathway that maintains safe, consistent water flow. Use this OEM-fit hose to replace a cracked, leaking, or damaged inlet line. What it does

• Carries incoming water from the home's supply to the appliance's water valve or fill assembly.
• Restores proper filling when an old hose leaks, is split, or becomes deteriorated.
• Helps prevent water damage and maintains normal cycle performance when functioning correctly.
• Compatible with repairs where the original inlet hose is worn, kinked, or blocked.

• One new replacement water inlet hose.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect hose fittings and seals; replace any worn clamps or gaskets for a secure, watertight connection.
• Route the hose without sharp bends or kinks and secure per the appliance's routing clips.

This drain hose routes and removes wastewater from the appliance so it can pump out normally and avoid standing water. It's a direct-fit service part used to restore proper draining. What it does

• Carries wastewater from the appliance pump to the household drain or air gap
• Restores normal draining when original hose is cracked, split, or leaking
• Helps prevent water backing up into the appliance when properly routed and secured
• Can stop intermittent leaks or reduced drain performance caused by hose damage

• One drain hose

• Disconnect power and turn off water supply before starting any repair
• Inspect hose routing and replace with the same path to avoid kinks or high loops that trap water
• Secure hose connections with appropriate clamps; tighten but avoid over-torquing
• After installation, run a short drain cycle and check all connections for leaks

This waterline assembly supplies water from the household line to the refrigerator's ice maker and/or water dispenser, restoring reliable water flow and preventing leaks from damaged tubing. Ideal when the fridge isn't filling or water is leaking. What it does

• Carries water from the home supply to the refrigerator ice maker/water dispenser
• Replaces cracked, pinched, or leaking tubing that causes visible leaks or puddles
• Restores normal fill to the ice maker and consistent water flow to the dispenser
• Helps eliminate slow or intermittent fill issues caused by restricted or damaged lines

• One waterline assembly with attached fittings as shown

• Shut off the home water supply and unplug the refrigerator before starting
• Tighten fittings to manufacturer torque—do not overtighten plastic fittings
• Inspect existing connections and replace any damaged shutoff valves or connectors
• After installation, turn water back on and check all connections for leaks; flush line per manufacturer instructions

This metal tailpipe directs dryer exhaust from the appliance outlet to the vent system, restoring proper airflow and helping prevent exhaust leakage. It's a direct-fit replacement that reinstates safe venting. What it does

• Channels exhaust air from the dryer outlet to the vent duct to maintain proper airflow
• Helps prevent exhaust leakage behind the dryer that can cause odor or moisture issues
• Stops rattling or misalignment at the dryer outlet caused by a damaged or bent tailpipe
• Supports safe venting performance that can affect drying efficiency

• One tailpipe

• Disconnect power; for gas dryers, shut off the gas supply before starting
• Basic tools (screwdriver/socket) typically required; follow OEM installation instructions
• Ensure the tailpipe is seated and secured to the dryer outlet and vent duct with proper clamps or screws
• After installation, check for leaks, proper alignment, and test dryer operation

This drain hose routes wastewater from the appliance to the household drain, helping remove used water after a cycle. It replaces a damaged, kinked or leaking hose to restore proper draining and prevent puddling. What it does:

• Carries discharge water away from the appliance during drain cycles
• Restores proper draining when the original hose is cracked, split or leaking
• Helps prevent backups and standing water inside the appliance
• Works with the appliance's pump and drain system to maintain normal operation

• One replacement drain hose

• Disconnect power and water before starting any work
• Verify hose routing and secure clamps to prevent kinks and leaks
• Inspect and replace any worn clamps or fittings as needed
• After installation, run a short cycle and check for leaks and proper drainage