Maytag Range Parts

Removed back panel and top burner cover to replace thermostat Read more

After looking at several YouTube videos that were only moderately helpful for my particular model, I disconnected the power at the breaker, disconnected the wires below the cooktop to the junction boxed lifted the whole unit out, including the fan assembly. I flipped it upside down and took off the screws holding the unit to the glass top. Although the new fan switch did not look the same as the original switch, the new switch does fit. The new switch did not come with a hex nut. The old hex... Read more

I searched on your website for a replacement stem. Unfortunately the stem is not sold separately. I purchased the entire valve after confirming with your online rep that I was ordering the correct part. I received the valve in 2 days removed the stem and inserted it directly into the existing burner valve. Perfect fit easy installation and burner works as it should. Simply repair and I probably saved $100 by not calling a repair tech to come to my home. Read more

With part ordered from your website. Read more

• Won't start

Replaced burner tubes and installed a new nob on the sparker control. Read more

Replaced all parts and range is working perfectly. Read more

Thanks to you, all went well. No problems. Read more

I looked up the parts on appliancepartspros.com, made the order, and was amazed how fast the parts arrived! I was able to watch their repair video and it showed me how to change it step by step. Read more

I did some research on the internet to find the part I needed. I came upon your web site Applianceparts pros.com and watched you videos. After watching your video on how to replace the broiler element, I ordered the broiler element. It came in a few days. I replaced the broiler element with my 12 year old son's help (always use every opportunity to teach my kids) in 50 minutes. Plugged the oven and turned on the broiler. As my 12 year old said "it works." Thank you for the easy how to... Read more

Ordered the parts from you and it's good now thanks for thinking of future use. Read more

At first, I thought that it was the defrost timer, but when I took apart the freezer, I found that the evaporator fan motor wasn't running, so I replaced it. Read more

I replaced the downdraft fan and fan motor of my 25 year old JennAire C301 cooktop. The issue was getting the fan/motor assembly out in such a tight place. I had to first remove the fan cover, cut the wires, then the assembly came out. Putting back wasn't as tough although getting the cover back on (over the motor) was a bit of a strain. Wired it back, turned it on, and was thrilled. Now I'll replace the knobs and burners and we're back in business. Read more

Replace all 6 covers. Read more