Need Help?
Call or text
Show parts
This part is discontinued by the manufacturer and is no longer available for purchase.
Complete microwave door assembly that installs on the front of your unit. Replace if your door is cracked, broken, damaged, or won't close properly.
Usually ships within 4 - 14 days
Complete microwave door assembly that installs on the front of your unit. Order a replacement if your current door is cracked, damaged, or no longer seals.
Replace your microwave door screen if it's damaged or deteriorating. Maintains proper shielding and visibility. Verify compatibility with your model number.
Replace your microwave's outer door screen glass when cracked or broken. Maintains proper shielding and door function. Verify fit with your model number.
Complete microwave door assembly that replaces cracked, broken, or damaged doors. Includes door frame and glass. Restores proper seal and appearance.
Complete door assembly for your microwave. Replaces cracked, broken, or damaged doors. Includes outer panel and necessary components for installation.
Complete microwave door assembly that installs on the front of your unit. Replace if your door is cracked, broken, damaged, or no longer seals properly.
Replacement spring for microwave control panel keys. Installs behind keypad buttons to provide tactile response. Order if your spring is broken or missing.
Replace your microwave's door hinge pin if the original is broken, bent, or missing. This small rod secures the door hinge assembly for smooth operation.
Replace your microwave's bottom base panel if it's cracked, rusted, or structurally damaged. This cabinet component supports internal parts.
Glass light cover for microwave cooktop lights. Shields and diffuses bulb from heat, grease, and splatter. Replace if cracked, broken, or missing.
Clear glass lens cover for over-the-range microwave cooktop light. Shields bulb from grease and splatters. Replace if cracked, broken, or missing.
Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.
Illuminates your microwave interior for monitoring food during cooking. Replace when bulb burns out or dims. Verify fit with your model number before ordering.
Holds the light bulb securely in your microwave for proper interior illumination. Replace if bulb won't stay in place, socket is burned or cracked.
Secures the stirrer blade in your microwave for even heating. Replace if stirrer rattles or food heats unevenly. Confirm fit with your model number.
The Turntable Coupler is an OEM part for GE microwaves. It connects the microwave's turntable motor to the glass tray, enabling the tray to rotate during cooking. This rotation ensures even heating and cooking of food items placed on the tray.
Causes of a bad turntable coupler can include regular wear and tear, physical damage from heavy or improperly placed items, or overheating due to prolonged use.
Symptoms of a bad turntable coupler include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Supports the removable wire rack inside your microwave cavity. Replace this holder if cracked, broken, or missing to restore stable two-level cooking capability.
Turntable stopped rotating or making grinding noise? Replace the turntable motor to restore smooth tray rotation. DIY repair in under 15 minutes.
Fixes loud grinding or coffee grinder noise from microwave. Simple DIY repair with 2 screws and wire connectors. Located on top, typically takes under 30 minutes.
Flange nut for microwave magnetron mounting. Replace this hex nut if stripped, missing, or damaged during magnetron removal or appliance maintenance.
Replaces cracked, warped, or damaged upper exhaust duct in your microwave. Directs airflow between vent area and exterior exhaust system for proper ventilation.
Replace your microwave's halogen light bulb when interior lighting dims or fails. Restores visibility for monitoring cooking. Verify fit with your model.
Protective cover for your microwave's interior halogen lamp. Replace if cracked, broken, or missing to shield the bulb and maintain safe operation.
Fix sensor cook cycles that won't adjust properly or show sensor errors. This humidity sensor monitors moisture levels for automatic cooking adjustments.
Wire harness for microwaves. Connects electrical components inside the unit. Replace if wires are damaged, frayed, or connections are loose or broken.
Secures the temperature sensor in your microwave. Replace if sensor is loose, misaligned, or causing erratic heating. Confirm fit with your model number.
Microwave not heating but still running? The magnetron converts electricity into microwave energy. DIYers report 1-hour installs with proper safety.
Air guide assembly for microwaves. Directs airflow through the vent system. Replace if cracked, broken, or missing to restore proper ventilation.
Replacement door latch body for microwaves. Secures the door closed during operation. Install when original latch is cracked, broken, or won't hold door.
Replacement door latch lever bracket for microwaves. Installs behind the control panel to hold interlock switches. Needed when bracket is cracked or broken.
Microwave won't stop running or starts when door closes? A faulty door switch is likely the cause. This safety switch is a 45-minute DIY fix.
Microwave won't start or heat but light works and timer counts down? A faulty monitor switch is often the cause. DIY repair typically under 30 minutes.
Fixes microwaves with motors that start slowly or make abnormal noise. This run capacitor stores electrical energy to help motors start and run smoothly.
Fix a microwave that won't heat or hums but doesn't start. This capacitor stores energy for the high-voltage circuit. Moderate DIY repair, 30-60 minutes.
Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.
Rear exhaust duct assembly channels airflow at the back of your microwave. Replace if cracked, rusted, or damaged to restore proper ventilation routing.
Microwave not heating? A failed high voltage transformer prevents the magnetron from producing microwave energy. DIY repair restores heating function.
Base plate for microwave ovens. Mounts inside the unit to provide structural support. Replace if cracked, warped, broken, or missing components.
Fix a microwave with no power or intermittent shutoffs. This thermostat monitors temperature and protects internal components. DIY repair in 20 minutes.
Wire harness for microwaves. Connects electrical components inside the unit. Replace if wires are damaged, frayed, burnt, or connections are loose.
Replace your microwave's power cord assembly if damaged, frayed, or missing. Connects the unit to your wall outlet for safe electrical operation.
Outer case guard for microwaves. Protects internal components and provides structural support. Replace if cracked, damaged, or missing during repairs.
Secures the power cord to your microwave's chassis. Replace this bracket if it's cracked, broken, or missing to properly mount and support the cord.
Secures microwave to wall cabinet mounting bracket. Replace if cracked, stripped, or missing to restore proper cabinet installation and stability.
Upper duct bracket assembly for over-the-range microwaves. Secures ventilation ductwork to the cabinet. Replace if bent, broken, or missing hardware.
Microwave not venting or overheating? This vent fan motor restores proper airflow and exhaust. Moderate difficulty repair requiring basic tools.
Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.
Color: brown. Measures about 9 inches in diameter.
Replacement glass turntable tray for microwaves. Rotates during cooking to heat food evenly. Order a new tray if yours is cracked, chipped, or broken.
Traps grease, smoke, and odors from your microwave's ventilation system. Replace when clogged or damaged. Verify fit with your model number.
Wire rack assembly for microwave ovens. Provides a removable shelf for multi-level cooking. Replace if bent, damaged, or missing to restore proper placement.
Charcoal filter removes grease and cooking odors in over-the-range microwaves. Replace when clogged or after 6 months. Verify fit by model number.
Washered screw secures panels, brackets, and internal microwave components. Replace if screw is missing, stripped, or damaged to restore proper fit.
Complete microwave door assembly with exterior panel, inner liner, and glazing. Replace if your door is cracked, dented, warped, or not sealing properly. Confirm fit with your model number.
This is a replacement microwave oven door assembly that restores a secure, heat-shielding closure and proper door latching for safe cooking. It replaces a damaged, bent, or non-sealing door to help the oven operate normally. What it does:
White outer door assembly for your microwave. Installs on the front panel. Replace if your door is cracked, dented, damaged, or won't close properly.
Flat bolt fastener for securing microwave to cabinets or wall brackets. Replace missing, stripped, or corroded mounting hardware to restore secure installation.
Support plate that mounts and secures the power control module inside your microwave. Replace if cracked, broken, or missing to properly hold the control board.
Lamp bracket for microwave interior lighting assembly. Secures the bulb housing in place. Replace if bracket is cracked, broken, or missing.