Microwave Parts

Microwave not working or no power? The relay board controls power distribution to the magnetron and fan. Requires control panel removal to install.

This heater sheath is the metal protective tube that surrounds and secures a dryer's heating element, helping protect the element from abrasion and keeping heating airflow directed for reliable drying performance. What it does:

• Protects the heating element from contact and physical damage during operation
• Helps maintain proper airflow around the element for consistent heat distribution
• Reduces risk of element grounding or shorting caused by contact with other parts
• Can address symptoms like sputtering or uneven heating, burning/metallic smells, or visible damage to the element area

• 1 heater sheath

• Power off and unplug the appliance before service to avoid shock or injury
• Inspect the heating element and mounting hardware while replacing the sheath; replace any damaged parts
• Handle the sheath and element carefully—sharp edges may be present; wear gloves and eye protection

Under-cabinet mounting kit for microwaves. Provides hardware and brackets to securely install your microwave beneath kitchen cabinets. Replacement kit.

This is an oil-filled high-voltage capacitor used in the microwave's magnetron circuit. It stores and releases electrical energy to help power the magnetron, which generates the microwaves that heat food. Replace this capacitor if the microwave runs but does not heat, hums loudly without heating, or if the capacitor has visibly bulged or leaked oil.

Color: White. Size: 13 oz. Spray paint primer. can.

Replacement trim frame for microwave door and control area. Restores outer appearance when original is cracked, chipped, warped, or bent. Direct-fit part.

This thermostat controls oven/dryer temperature by opening or closing its contacts as the appliance reaches set temperatures, helping maintain safe and consistent operation. Replaces a worn or failed thermostat to restore proper temperature regulation. What it does:

• Senses temperature and interrupts heating when limits are reached to prevent overheating
• Re-establishes heating when temperature falls, maintaining normal cycle performance
• Commonly installed when an appliance won't heat, overheats, or cycles erratically
• Works as a direct replacement for the OEM thermostat designed for compatible LG units

• One thermostat

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Note wire locations or take a photo before removing wiring; reconnect wires to the same terminals
• Use a multimeter to verify thermostat continuity and correct operation before and after replacement

This thermostat controls refrigerator temperature by opening and closing the cooling circuit as needed to maintain set temperatures. Replaces a failed or intermittent temperature control to help restore consistent cooling and food safety. What it does:

• Senses cabinet temperature and signals the cooling system to cycle on or off
• Stops continuous running when thermostat fails closed or restores cooling when stuck open
• Commonly used to address inconsistent temperatures, warm spots, or compressor short-cycling
• Passive electromechanical component—no programming required

• Disconnect power to the appliance before starting any repair
• Handle terminals and sensor capillary carefully to avoid bending or damage
• Confirm wire connections match the old thermostat and secure spade terminals firmly

Protective cover for microwave stirrer assembly. Replaces cracked, damaged, or missing covers that expose internal components. Installs in cavity ceiling.

This replacement drive coupler connects the motor to the washer's drivetrain to restore normal agitation and spinning. Use it when the machine fails to drive or slips during cycles. What it does

• Transfers motor torque to the transmission/drive assembly so the tub can agitate and spin
• Commonly fitted when a worn or broken coupler causes no-spin or no-agitate symptoms
• Replaces a damaged or degraded plastic/rubber coupling that can crack or shear
• Helps stop slipping, unusually loud drive noises, or intermittent drive failures

• Disconnect power and water before any service; follow OEM safety precautions
• Basic hand tools are typically required; your model's service manual for disassembly steps
• Inspect the motor shaft and transmission input for damage when replacing the coupler
• If other drive components are damaged, replace them as recommended by the OEM

This plastic actuator engages the door interlock switches when the microwave door is closed, ensuring the appliance only operates when the door is fully latched. It translates the motion of the door latch into the switch activation needed for safe operation. Replace this part if the microwave won't start, runs with the door open, or the door doesn't latch securely.

Microwave not heating but all other functions work? This magnetron thermostat protects against overheating. Easy DIY repair in under an hour.

Installation hardware kit with mounting screws, brackets, and fasteners to secure your microwave during setup. Replace missing or damaged hardware.

Direct replacement noise filter assembly for microwaves. Reduces electrical interference. Replace if cracked, damaged, or missing to restore clean power.

Fix uneven heating in your microwave with a new stirrer motor. This synchronous motor rotates the stirrer fan to distribute microwaves evenly for cooking.

Microwave not heating? A failed high voltage transformer prevents the magnetron from producing microwave energy. DIY repair restores heating function.