Microwave Parts

A small replacement button plug that fills a control-panel or console opening and restores a finished appearance. Keeps panels sealed and prevents debris from entering unused holes. What it does:

• Covers unused control holes or mounting openings on consoles and panels
• Helps block dust, moisture, and grime from entering appliance internals
• Restores a consistent, finished look to the control surface
• Useful when a damaged or missing plug leaves an exposed opening

• One button plug (black)

• Typically snaps into place from the front of the panel; no special tools usually required
• Ensure the cavity is clean and free of debris before installing for a secure fit
• If the plug sits near electrical components, disconnect power to the appliance before servicing
• Verify fit against the opening before final installation; slight trimming is not recommended unless specified

Secure hex bolt for microwave assembly. Replaces lost, stripped, or damaged mounting bolts. Essential hardware for panel attachment and stability.

Carbon filter for range hoods and over-the-range microwaves. Dimensions: 4" x 6-3/16" x 3/8" (4 x 6.1875 x 0.375). Rectangle shape. Removes cooking odors from cooking air. Replace when clogged, discolored, or every 6-12 months.

Button locking mechanism secures control panel buttons in your microwave. Replace if broken, loose, or missing to restore proper button alignment and feel.

This replacement drive coupler connects the motor to the washer's drivetrain to restore normal agitation and spinning. Use it when the machine fails to drive or slips during cycles. What it does

• Transfers motor torque to the transmission/drive assembly so the tub can agitate and spin
• Commonly fitted when a worn or broken coupler causes no-spin or no-agitate symptoms
• Replaces a damaged or degraded plastic/rubber coupling that can crack or shear
• Helps stop slipping, unusually loud drive noises, or intermittent drive failures

• Disconnect power and water before any service; follow OEM safety precautions
• Basic hand tools are typically required; your model's service manual for disassembly steps
• Inspect the motor shaft and transmission input for damage when replacing the coupler
• If other drive components are damaged, replace them as recommended by the OEM

Protective cover for the stirrer mechanism inside your microwave. Replace if cracked, melted, or missing to shield internal components from debris.

Reduces electrical interference in your microwave. Mounts near the power supply. Replace if cracked, damaged, or causing blown fuses or failed operation.

This is a fixed high limit thermostat that monitors the internal temperature of the microwave and shuts off the unit if it overheats. It acts as a safety device to prevent damage to components and reduce fire risk. Replace this thermostat if the microwave shuts off unexpectedly during use, fails to start, or if continuity testing shows the thermostat is open.

This interlock is the door latch assembly that keeps a dryer door closed and prevents the dryer from running when the door is open. It restores proper door sensing for safe, reliable operation. What it does:

• Secures the dryer door so the machine only runs with the door fully closed
• Activates the door-safety circuit so the dryer stops when the door opens
• Commonly replaced when the door won't latch or the dryer won't start
• Helps eliminate intermittent start/no-start symptoms related to door sensing

• One interlock assembly

• Disconnect power before starting any repair to avoid electrical shock
• Replace only with the exact part number specified for your model
• Basic hand tools are typically required; avoid forcing plastic clips and connectors

This thermistor measures temperature changes inside your microwave to control cooking functions and safety systems. It sends temperature readings to the control board to adjust power levels and cooking times. Replace this part if your microwave doesn't heat properly, overheats, or sensor cooking features don't work correctly.

Fix a microwave that won't heat or heats slowly by replacing the inverter board. This repair requires 1-2 hours and moderate skill to access.

Lower cabinet base for microwaves. Provides structural support and stabilizes the unit. Replace if cracked, damaged, or warped to restore level positioning.

Microwave not heating food? The magnetron generates microwaves for cooking. Moderately difficult repair requiring high-voltage precautions.

Fixes uneven cooking or browning in convection mode. This motor circulates heated air throughout the cavity for consistent baking results.

This humidity sensor detects moisture levels inside the microwave cavity during cooking. It allows the microwave to automatically adjust cooking time and power when using sensor-cook or auto-reheat functions. Replace this sensor if your microwave consistently overcooks or undercooks food on sensor settings, or if you receive error codes related to the humidity sensor.

Metal bracket that mounts and secures the microwave control panel. Replaces cracked, bent, or missing brackets to restore proper panel alignment.