Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Range Heating Element

Best Seller
Bake Element
Genuine Ge part
By: Ge
Part Number: WB44T10031

The Bake Element is an OEM part for GE ranges. This part provides the necessary heat for baking and roasting inside the oven cavity. The bake element is located at the bottom of the oven and generates heat when electrical current passes through it.

Causes of a bad bake element can include general wear and tear from frequent use, damage due to accidental impacts or spills, and electrical issues such as short circuits or power surges.

Symptoms of a bad bake element include:

  • The oven not heating up properly or at all
  • Uneven baking or roasting results
  • Visible damage such as burns, blisters, or breaks in the element
  • The oven tripping circuit breakers or fuses

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You The boil and baking elements   Raymond S. • Dealeton , VA • September 26, 2019

I just took them off and replaced them. Read more

More
$99.95
Compare At:
$117.94
You Save:
$17.99

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Bake Element
Genuine Frigidaire part
By: Frigidaire
Part Number: 316202200

This bake element is the primary heat source for the bake cycle in your range or wall oven. Replacing a failed element helps restore proper preheating and more even results when using the bake setting.

  • Provides direct heat during the bake cycle
  • Works with the control/thermostat to reach and maintain set temperature
  • Common failure symptoms: no heat in bake, very long preheat, won't reach temperature, uneven baking
  • Visual clues: blistering, cracking, breaks, or burnt spots on the element sheath
Includes: 1 bake element Installation notes:
  • Disconnect power at the breaker or unplug the appliance before servicing
  • Access the element from the oven cavity; remove mounting screws/bracket
  • Pull the element forward carefully and move wires one at a time to the new element; do not let wires slip back into the insulation
  • Ensure terminals are fully seated and the mounting plate is secure before restoring power

Do-It-Yourself Stories from Customers like You Baking element broke   Doran C. • Anchorage , AK • April 04, 2014

Unplugged the stove, unscrewed the mounting plates from the back unsnapped the wires then revered the procedure to install new one. Read more

More
$128.49
Compare At:
$166.82
You Save:
$38.33

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Bake Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04100020

The Bake Element is an OEM part for Whirlpool ranges. This heating element is responsible for providing the necessary heat for baking and roasting by distributing heat evenly throughout the oven cavity, ensuring consistent cooking results.

Over time, bake elements can wear out or fail due to regular use, exposure to high temperatures, or accidental damage during cleaning. 

Symptoms of a bad bake element include:

  • Oven not heating to the set temperature
  • Uneven cooking or baking results
  • Visible signs of damage such as burns, blisters, or breaks in the element
  • The element not glowing red when in use

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You Oven on longer working found a hole blown through the ceramic covering in the bake element meaning that the heating wire had burnt off   William N. • Canandaigua , NY • July 19, 2014

Removed 2 sheet metal screw pulled element out about 2 inches. Removed two Spade connections. Removed the element from the oven. Inserted the new element into the over, connected the two spade connector. Reinstalled the two sheet metal screws. Set the oven to bake for testing and tested until the element turned red. Total time less than 5 minutes. Read more

More
$92.95
Compare At:
$110.61
You Save:
$17.66

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Small Surface Element
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823699

The Small Surface Element is an OEM part for Whirlpool electric ranges and cooktops. This heating element is responsible for providing heat to a specific area on the cooktop, typically used for smaller pots and pans. It ensures even and efficient heating, allowing for precise cooking control.

Causes of a bad surface element can include regular wear and tear, overheating, or electrical malfunctions. A malfunctioning surface element can result in uneven heating, longer cooking times, or no heat at all.

Symptoms of a bad small surface element include:

  • The element not heating up
  • Uneven or inconsistent heating
  • Sparks or electrical arcing when the element is turned on
  • Visible damage or discoloration on the element

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Stove Element surface burned out..   Jime V. • Miami , FL • March 14, 2014

Purchased a new Element surface and installed same... All Okay now... Read more

More
$99.42
Compare At:
$118.31
You Save:
$18.89

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Single Radiant Heating Element For Range
Genuine Samsung part
By: Samsung
Part Number: DG47-00060A

The Single Radiant Heating Element for Range is essential for maintaining consistent and efficient heat in your Samsung range. This genuine OEM part is specifically engineered to deliver reliable performance, ensuring your cooking surfaces reach and maintain the desired temperatures effectively. Built with durability in mind, the heater radiant-single provides long-lasting service, reducing the need for frequent replacements and saving you time and money. Compatible with a wide range of Samsung ranges, this heating element guarantees a perfect fit and easy installation, allowing you to quickly restore your appliance's functionality. By choosing the Single Radiant Heating Element for Range, you benefit from improved cooking precision and uniform heat distribution, enhancing your overall kitchen experience. Whether you are repairing a malfunctioning range or upgrading an older model, this genuine OEM part offers a trusted solution to keep your Samsung range operating smoothly. Ensure your appliance performs at its best with this high-quality, reliable heating element.

Do-It-Yourself Stories from Customers like You Burned out element   Michael R. • Jacksonville , FL • October 30, 2015

Removed the top of the range after unplugging it, removed the brace holding the element, replaced the element. Total of 20 minutes spent. Read more

More
$190.47
Compare At:
$224.75
You Save:
$34.28

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Element, Broil
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04000048

The Broil Element is an OEM part for Whirlpool ranges. This part provides the intense, direct heat necessary for broiling. This part is located at the top of the oven cavity and is essential for achieving high temperatures needed for tasks like browning and searing.

Causes of a bad broil element can include electrical issues such as short circuits, damage from spills or food debris, and general wear and tear from repeated use.  

Symptoms of a bad Broil Element include:

  • The oven not reaching broil temperatures
  • Inconsistent or uneven broiling
  • The element not glowing red when in use
  • Visible signs of damage or burning on the element

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms
  • Little to no heat when broiling
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Broil element was burned out   Aybars G. • Ridgewood , NJ • June 17, 2019

Turned off breaker to oven, took pictures of existing broil, supporting bracket and shield attached to oven, removed screws holding element, support piece and shield, removed bracket and shield, pulled out the element, took another close-up picture of the wires connected to element, removed wires, connected new element, turned breaker on to see if connection is correct, turned it off, installed element, shield and support bracket (in this order). Turned breaker on. Hardest part was loosening... Read more

More
$98.54
Compare At:
$117.26
You Save:
$18.72

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Surface Element, 8"
Genuine Ge part
By: Ge
Part Number: WB30X354

2450w, low rise, attached ring

Do-It-Yourself Stories from Customers like You Baking element broke broiler never worked since I moved in 13 years ago and the four burners on the stove top were slowly dying   Marybeth K. • Milltown , NJ • November 13, 2017

With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal... Read more

More
$71.95
Compare At:
$86.99
You Save:
$15.04

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Hidden Bake Element Assembly (Lower)
Genuine Ge part
By: Ge
Part Number: WB44X45499

Restore even, reliable bottom heat with this hidden bake element assembly. Located beneath the oven floor, it delivers the heat needed for consistent preheating and baking when the original element is burned out or damaged.

  • Supplies primary bottom heat during Bake cycles for electric ovens
  • Helps achieve normal preheat times and maintain set temperature
  • Replaces an element that is open/shorted or visibly blistered/broken
  • Symptoms can include no heat in Bake, very long preheat, or uneven baking results
What's included: Hidden bake element assembly. Installation notes:
  • Disconnect power at the breaker before servicing
  • Remove oven racks and oven floor panel to access the hidden element
  • Note wire positions; transfer and reconnect leads one at a time to the new element
  • Inspect wiring and high-heat insulation; repair/replace any damaged connectors before reassembly

Do-It-Yourself Stories from Customers like You Oven slow to heat   Rictor G. • Peoria , AZ • February 23, 2015

I called GE and they sent a tech out. $89 service call. Had I REALLY inspected the oven the hidden element had blown and separated and part of it welded itself to the inside of it's compartment. GE wanted another $350 to come back and fix it. I bought the part here for around $55 and had it running again in about an hour! Read more

More
$48.95
Compare At:
$57.76
You Save:
$8.81

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Bake Element (Lower Heating Element)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP661416

The bake element is the oven's primary lower heat source. Replacing a failed element restores proper preheating and even baking performance when the oven won't heat or struggles to maintain temperature during the bake cycle. What it does

  • Provides the main heat for the bake cycle in electric ovens
  • Common failure symptoms: no heat on bake, very slow preheat, or uneven baking
  • Visible damage such as blistering, cracks, or burn spots on the element indicates replacement is needed
  • Helps the oven reach and hold set temperature when functioning correctly
What's included
  • 1 bake element
Install notes
  • Disconnect power at the breaker before servicing to prevent electrical shock
  • Remove oven racks; access the element mounting screws from inside the oven cavity
  • Carefully pull the element forward, support the wires, and transfer the connectors one at a time to avoid losing them behind the liner
  • Ensure terminals are fully seated; do not overtighten mounting screws, then restore power and test bake

This part fixes the following symptoms
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You Oven would only heat to 200 250 then the f3 lit up on front panel   Marca A. • Hernando , FL • November 14, 2014

Purchased bake and broil elements as well as temp sensor. Oven is 18 years old...wasn't sure which was not functioning properly. Carefully Removed all three components, and then installed new. Oven heats perfectly. Saved buying new wall oven. Installation was very easy. I am a homemaker and mom. We can do all kinds of fix its. These folks are outstanding! !!! Items arrived very fast and packaged well. Read more

More
$84.95
Compare At:
$100.24
You Save:
$15.29

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Surface Coil Element (8-Inch)
Genuine Ge part
By: Ge
Part Number: WB30K10018

Restore reliable heat on your coil-top range with this 8-inch surface coil element assembly. It replaces a burned-out or damaged large burner so pots and pans heat evenly and respond predictably.

  • Provides the electric heating surface for the 8-inch burner position
  • Common fix for a burner that won't heat or heats intermittently
  • Replaces a coil that is broken, blistered, or visibly burned
  • Resolve uneven heating or hot spots on the element
What's included: One 8-inch surface coil element assembly. Install notes:
  • Disconnect power and let the appliance cool completely before servicing.
  • Access and procedure vary by model; your product documentation.
  • Handle the element carefully; avoid bending the coil or terminals.
  • Inspect the burner receptacle and wiring for heat damage; replace if worn or loose.

Do-It-Yourself Stories from Customers like You It smell really bad then i noticed that the terminal block was burning and it cause the surface unit asm bad   Chushan H. • West Valley City , UT • October 21, 2014

I took the old Terminal block out and put the new one back in. it's about 15 minutes job. it was a really simple thing to do. I don't know why it always get the Terminal Block burn in every 3 or 4 months. I have to replace it all the times. I am very disappoint about the Electric Stove. The brand I have, is Hotpoint. I think about changing to Gas Stove instead soon. Read more

More
$83.40
Compare At:
$99.25
You Save:
$15.85

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Radiant Surface Element (Dual)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10275049

This dual radiant surface element restores even, responsive heat to a smooth-top range or cooktop. It replaces a failed burner so the inner and outer rings heat correctly for dependable everyday cooking.

  • Provides heat to a dual-size cooking zone beneath the glass surface
  • Works with the surface control to use the inner ring alone or both inner and outer rings
  • Common symptoms: burner won't heat, only one ring heats, slow or uneven heating, visible scorching or damage on the element
  • Helps restore consistent temperature control and full dual-ring operation
What's included: 1 dual radiant surface element Install notes:
  • Disconnect power at the breaker before servicing; elements carry high current
  • Lift or remove the cooktop to access the element
  • Note wire locations and transfer any mounting brackets/clips from the old element
  • Center the element under the burner outline and secure all connections before restoring power

Do-It-Yourself Stories from Customers like You Whirlpool glass top burner replacement   James F. • Fort Lauderdale , FL • March 21, 2015

It was a simple process to enter the model number of our glass cook top stove; learn the part number required and order. It arrived in 2-days -- least expensive shipping method. The cooktop was removed with a Phillips-head screwdriver by 4 small sheet metal screws on the right and left side of the oven. The oven's power to the cooktop was easily disconnected via two "clips" and one ground. Would have cost way more with an appliance repair shop and it's an easy do-it-yourself repair. Read more

More
$156.95
Compare At:
$185.20
You Save:
$28.25

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Broil Element 240V
Genuine Ge part
By: Ge
Part Number: WB44M5

The Broil Element is an OEM part for GE ranges. This part provides the necessary heat for broiling, located at the top of the oven cavity and designed to deliver even and intense heat for broiling foods.

Causes of a bad broil element can include electrical issues such as short circuits, physical damage from impacts or heavy usage, or wear and tear over time.  

Symptoms of a bad broil element include:

  • The broil element not heating up
  • Uneven or insufficient broiling results
  • Visible damage such as blisters or breaks in the element
  • The oven not reaching the desired broiling temperature

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You Broiler element burnt out in my kenmore wall oven   James O. • Moulton , TX • July 26, 2014

Cut off power ,inside I remove the two back screws, remove the two front screws with hangers. Pull element out, clip wires so they don't fall back in holes with clothes pins. worked good. But wire connection to the broiler was to large, had to replace connectors, wire fell in hole, had to pull wall oven out and remove back panel. I then mounted the new element to oven. Replaced connectors ,connected connectors, closed back panel, put oven in place ,connected power lines. Turned power on. Works... Read more

More
$75.95
Compare At:
$89.62
You Save:
$13.67

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Oven Broil Element
Genuine Ge part
By: Ge
Part Number: WB44X10015

This replacement part is a broil element, and it is intended for use in different types of kitchen appliances. This is a genuine replacement part made by General Electric. The broil element is typically found inside an oven or range and is part of the heating mechanisms that help cook or bake food. The broiler heats from the top, inside area of the appliance and helps with specific things like melting cheese or crisping the tops of dishes.A new broil element might be needed if the current broiler is not heating up at all, or not heating up enough. If the broil element is working properly the user should feel the heat coming from the top area of the range. It is also common to see the broil element turn bright red during use, displaying that there is heat coming off the unit. If the element is attached properly, but still unable to heat, it might be time to replace this part. Be sure that the current element is cooled down before beginning to attempt this repair. This part is sold individually and is sourced directly from the manufacturer. This element is a genuine OEM replacement part.

This part fixes the following symptoms
  • Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You Broiler heating element went out   Mark H. • Water Valley , MS • March 16, 2015

I ordered a broiler element, watched the video and replaced the element when it arrived. I turned off the electrical breaker to the stove/oven. I then removed the oven door from the hinges and removed the 1/4" square head screws that secured the element in place,( the video showed phillip head screws ), removed the element wires from the old element. Replaced the element wires to the new element and reattached the element to the oven with the hex head screws. I then put the oven door back on... Read more

More
$78.66
Compare At:
$93.61
You Save:
$14.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Oven Broil Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10310260

This broil element is the oven's upper heating element. It delivers intense top heat for broiling and finishing, restoring proper broiler performance when the original element is open, warped, or visibly damaged.

  • Provides upper radiant heat during broil and top-browning cycles
  • Typical symptoms: broiler won't heat or glow; food won't brown on top; uneven broiling
  • Replace if the element is cracked, blistered, pitted, or broken
  • Restores consistent top heat and broiler function
Includes 1 broil element.
  • Disconnect power at the breaker before servicing; allow the oven to cool
  • Remove oven racks; take out mounting screws and gently pull the element forward
  • Transfer the two wire leads one at a time; support wires so they don't slip back into the cavity; ensure snug connections
  • Reinstall hardware, restore power, and test the broil cycle

This part fixes the following symptoms
  • Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You Control display was not working   James T. • Calhoun , GA • February 17, 2015

Ordered a new one. Read more

More
$104.24
Compare At:
$125.09
You Save:
$20.85

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Surface Coil Element (6-Inch)
Genuine Ge part
By: Ge
Part Number: WB30X254

Restore reliable heat on your range's small burner with this 6-inch surface coil element. Replacing a worn or burned-out coil brings back consistent temperature response and dependable everyday cooking performance.

  • Supplies direct electric heat to a 6-inch cooktop burner
  • Replaces a coil that is warped, cracked, or has an open/burned-out section
  • Common symptoms include: burner won't heat, heats unevenly, or works intermittently
  • Visible damage, hot spots, or arcing at the terminals can indicate failure
What's included: One 6-inch surface coil element Install notes:
  • Disconnect power by unplugging the range or switching off the circuit breaker
  • Lift the old coil and pull straight out from the receptacle to remove
  • Inspect the element receptacle/terminal block for discoloration or pitting; replace if damaged
  • Align terminals and support, insert fully, and ensure the element sits level in the drip bowl

Do-It-Yourself Stories from Customers like You Needed new heating coils   Judith C. • Stanhope , NJ • February 22, 2016

Ordered new heating coils for stove Read more

More
$56.22
Compare At:
$66.90
You Save:
$10.68

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Oven Broil Element (Upper)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10583047

This ceiling-mounted broil element delivers the intense, top-down radiant heat your oven needs for broiling and finishing. Replacing a failed element restores strong, even broiler performance and consistent browning. What it does:

  • Provides high-temperature, top-down heat for broiling, searing, and finishing foods
  • Common symptoms of failure: broiler won't heat, uneven broiling, or element does not glow
  • Visible cracks, blistering, or breaks on the element indicate it's burned out
  • Restores normal broil operation when the original element is open/failed
What's included:
  • 1 broil element
Install notes:
  • Disconnect power at the breaker and allow the oven to cool completely
  • Remove mounting screws, gently pull the element forward, and disconnect the two wire terminals; support wires so they don't slip back into the cavity
  • Reconnect terminals firmly, secure the element, and ensure it's clear of oven walls
  • Test the broil function before returning the appliance to service

This part fixes the following symptoms
  • Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You The self cleaning feature of my ge double oven hasn't worked in years and recently the upper oven baking element stopped working   Robert A. • Enfield , CT • October 19, 2015

I wanted to get the upper oven baking element replaced; it hasn't been working for a few months. This double oven has had two other issues, there is a fan that comes on to cool the electronics panel, That fan has made excessive noise and it operates for 2-3 hours after the oven turns off. The other problem with the oven is the Self-Cleaning feature runs for about 15-30 minutes and then turns off with an error code. I've had a local appliance repair person in to address the error code and... Read more

More
$81.61
Compare At:
$97.12
You Save:
$15.51

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store