Range Heating Element

The Surface Element is an OEM part for Whirlpool ranges. This part provides heat to the cooking surface, allowing for the preparation of food. 

Common causes of a bad surface element include electrical faults, physical damage from heavy cookware, or degradation from constant heating and cooling cycles.

Symptoms of a bad surface element include:

• Inconsistent or uneven heating
• The element not heating up at all
• Visible damage such as burns or breaks in the coil
• Sparking or unusual noises when the element is turned on

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Range Oven Triple Surface Element is an essential component for maintaining the performance of your range oven. This genuine OEM part ensures reliable and efficient heating, allowing you to cook your meals evenly every time. Designed specifically for Samsung range ovens, it guarantees a perfect fit and seamless integration with your appliance. The triple surface design provides versatile cooking options, whether you're baking, broiling, or roasting, giving you greater control over your culinary creations. Installing this heater radiant-triple is straightforward, helping you restore your ovenGÇÖs functionality quickly without the need for professional assistance. By choosing the Range Oven Triple Surface Element , you invest in durability and consistent performance, ensuring your range oven operates at its best for years to come. Enhance your cooking experience with this high-quality genuine OEM part, tailored to meet the standards of Samsung appliances and deliver exceptional results in your kitchen.

Restore dependable oven heat with this lower bake element. Replacing a burned-out bottom element helps your range preheat properly and bake or roast evenly, eliminating long preheat times and no-heat conditions.

• Supplies the primary heat from the bottom of the oven during Bake
• Typical failure symptoms: no heat in Bake mode, long preheat times, uneven baking, visible cracks or blisters on the element, or tripping the circuit breaker
• Replacing a failed element restores consistent, reliable oven temperatures

• Disconnect power at the breaker and allow the oven to cool completely
• Remove oven racks; take out the element's mounting screws; gently pull the element forward to access wires
• Move one wire at a time to the new element; prevent wires from slipping back into the rear panel
• Re-secure the element, ensure it isn't contacting the cavity, restore power, and test Bake

Female spade connection. For male spade connection use part number WP74003019.

1350w, low rise, attached ring

The Bake Element is an OEM part for Whirlpool ranges. This part provides the necessary heat for baking by generating and distributing even heat throughout the oven cavity. It is located at the bottom of the oven and is essential for achieving consistent baking and roasting results.

Causes of a bad bake element can include regular wear and tear, electrical faults, or damage from spills and residues.  

Symptoms of a bad bake element include:

• The oven not heating up or taking longer to reach the desired temperature
• Uneven baking or roasting results
• Visible damage or burn marks on the element

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a dual radiant surface element for a smoothtop range. It restores reliable heating on one burner position with adjustable small/large cooking zones for better control and even heat on compatible glass cooktops.

• Heats cookware using two selectable zones (small or full) to match pan size
• Replaces a worn or non-heating burner element on the cooktop
• Common symptoms: element won't heat, only one ring heats, uneven heating, or cycling off too soon
• Helps resolve tripped-limiter behavior caused by a failing element assembly

What's included: One dual radiant surface element assembly Install notes:

• Disconnect power before servicing; surface elements are high-voltage components
• Lift or remove the cooktop to access the element
• Transfer any mounting brackets and reconnect wires to the same terminals
• Avoid touching the radiant surface; handle by the frame to prevent damage

The Bake Element is an OEM replacement part for GE electric ranges. It is located at the bottom of the oven cavity.

Causes of a bake element malfunctioning include wear over time, overheating due to blocked airflow, or damage from impact or explosion.

Symptoms of a bad bake element include:

• Long preheat times or oven not reaching temperature
• Baking/cooking results not uniform
• Hot/cold spots inside oven cavity
• Burned or undercooked foods

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Surface Heating Element is an OEM part for Whirlpool cooktops and ranges. It provides the heat necessary for cooking. This element is designed to deliver consistent and even heat distribution, ensuring your cooking results are optimal every time.

Causes of a bad surface heating element can include wear and tear from regular use, damage due to spills or impacts, and electrical issues such as short circuits or burned-out connections.  

Symptoms of a bad surface heating element include:

• The element not heating up or taking longer to heat
• Inconsistent heating or hot spots
• Visible damage or burns on the element
• The element not responding to temperature controls

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Medium Haliant Element is an OEM part for GE cooktops. This radiant heating element is located beneath the ceramic cooktop surface and provides a medium-sized heating area for cooking various dishes. This element measures 6 Inches.

Causes of a bad haliant element can include electrical issues such as short circuits, wear and tear from regular use, or physical damage from impacts or overheating.

Symptoms of a bad medium haliant element include:

• The element not heating up or only heating partially
• Inconsistent or uneven heating
• The cooktop displaying error codes related to the heating element
• Visible damage or discoloration on the element

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Surface Element is an OEM part for GE ranges. This element is responsible for providing the heat needed for cooking on the stove's cooktop. It heats up when the control knob is turned on, allowing you to cook food in pots and pans placed on the cooktop. 8 inch element. For 6 inch element use part number WB30X218

Causes of a bad surface element can include regular wear and tear, damage from excessive heat, or electrical malfunctions. 

Symptoms of a bad surface element include:

• The element not heating up at all
• The element heating unevenly or intermittently
• Visible damage such as burn marks or deformities
• Sparks or electrical shorts when the element is turned on

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Bake Element is an OEM replacement part for GE electric wall ovens and ranges. It is the heating coil responsible for the bake function. The bake element generates precise, consistent heat through an electrical current to provide reliable and efficient baking.

Causes of a bad bake element can include mineral or liquid deposits baked onto the coils over time reducing heating effectiveness, or physical damage such as cracks or breaks in the coils.

Symptoms of a faulty bake element include:

• Inadequate or uneven baking temperatures
• Extended baking times needed to cook foods
• Portions of the oven or bake racks getting hotter than intended areas
• The bake function not working at all or creating only minimal heat

This OEM GE part is also compatible with Hotpoint, Sears Kenmore, and some RCA wall oven models.

The Surface Element is an OEM replacement part for Whirlpool ranges. It is responsible for generating heat on the cooktop, allowing for efficient and even cooking. This component is designed to provide adjustable heat levels to accommodate various cooking needs, from simmering to boiling.

Symptoms of a bad Surface Element include:

• Inconsistent heating or failure to heat up
• Visible damage or wear, such as burns or warping
• Electrical issues, like sparking or short-circuiting

Causes for a malfunctioning Surface Element can be attributed to electrical failures, prolonged use at high temperatures, or physical damage due to spills and overflows.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dual Radiant Heater for Range is a reliable component designed to restore the heating functionality of your range. Operating at AC240V with power ratings of 1900W, this heater is available in both 9-inch and 12-inch sizes to fit various range models. As a genuine OEM part, it ensures seamless compatibility and efficient performance with your Samsung range. The Dual Radiant Heater provides consistent heat distribution, enhancing your cooking experience by maintaining optimal temperatures during use. Its durable construction guarantees long-lasting performance, reducing the need for frequent replacements. Installing this heater is straightforward, allowing you to quickly get your range back to full functionality without the hassle. Whether you need to replace a damaged heater or enhance your applianceGÇÖs performance, the Dual Radiant Heater for Range offers the reliability you expect from a genuine OEM part. Trust this component to deliver the dependable heating needed for all your cooking needs, ensuring your range operates smoothly and efficiently.

The Radiant Surface Element is an OEM part for Frigidaire ranges and cooktops. This part generates heat for cooking and boiling on the cooktop surface.

Causes of a bad Radiant Surface Element can range from electrical issues or loose connections to physical damage from impact or spillovers.  

Symptoms of a faulty Radiant Surface Element include:

• Element not heating up or providing insufficient heat
• Element glowing unevenly or only partially heating
• Cracks or damage visible on the element surface
• Burning smells or discoloration on the cooktop

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This broil element provides the intense top heat your electric oven needs for broiling and finishing dishes. Replacing a failed element restores consistent top browning when the broiler no longer heats or heats unevenly.

• Heats from the top of the oven cavity during broil to sear and brown foods
• Replaces a burned-out, shorted, or physically damaged element
• Symptoms: broiler won't heat, intermittent heating, uneven top browning, or visible blistering/breaks

• Disconnect power at the breaker before servicing; allow the oven to cool completely
• Remove oven racks; support the element while removing mounting screws and gently pull it forward to access terminals
• Transfer wires one at a time to the new element; ensure tight connections and that terminals do not touch metal surfaces; restore power and test broil