Range / Cooktop / Oven Igniter

This replacement spark electrode for gas burners creates the spark at the burner head to ignite the gas. It helps restore quick, reliable lighting when a burner won't ignite or only lights intermittently. What it does:

• Generates a high-voltage spark at the burner to ignite gas
• Replaces cracked, fouled, or shorting electrodes that prevent proper arcing
• Can help resolve a burner that won't light, clicking without ignition, or weak/no spark at one burner
• Supports consistent burner ignition when properly aligned and connected

• 1 ignition spark electrode

• Disconnect power and shut off gas supply before servicing
• Allow the appliance to cool; remove grates/caps and access the electrode at the burner
• Transfer any mounting hardware; seat the electrode securely and avoid stressing the ceramic insulator
• Route the lead away from heat/sharp edges and ensure all connections are fully seated

A surface ignitor that produces the spark needed to light gas burners on compatible ranges and cooktops. Replaces a worn or failed ignitor to restore reliable ignition and consistent burner lighting. What it does

• Creates the spark at the burner to ignite gas when the control is turned on.
• Commonly used when burners click but fail to light or when a specific burner never ignites.
• Works with the cooktop's ignition system to provide consistent, repeatable sparking.
• Fits into the burner assembly and connects to the appliance's existing wiring and mounting.

• One surface ignitor (quantity: 1)

• Disconnect power to the appliance and shut off the gas supply before starting any service.
• Handle the ignitor by the ceramic/insulated areas; avoid touching the tip with bare hands to prevent contamination or damage.
• Confirm correct fit and secure all wiring connections; test ignition on a safe flame setting after reinstalling.

This surface igniter lights gas burners on compatible ranges so burners ignite quickly and reliably. Replaces a cracked, worn or non-sparking igniter to restore normal ignition and help your cooktop operate safely. What it does:

• Sends the spark that ignites the burner when the control knob is turned
• Commonly replaces igniters that click repeatedly, spark without lighting, or don't spark at all
• Works with the burner head and valve to initiate flame during startup
• Helps prevent delayed ignition and assists consistent burner performance

• One surface igniter

• Disconnect power and shut off gas supply before starting any service
• Handle the ceramic igniter element carefully; it is fragile and can crack if dropped or flexed
• Inspect wiring and connector for heat damage; replace connectors or harnesses if corroded

This surface ignitor is the replacement spark electrode that provides the spark to light a gas cooktop or range burner. Replacing a failed ignitor restores reliable ignition and helps get burners lighting again. What it does:

• Produces the high-voltage spark that ignites gas at the surface burner
• Replaces cracked, glazed, or non-sparking electrodes that prevent ignition
• Addresses symptoms such as no spark, weak or intermittent sparking, or burners that won't light
• Works with standard surface burner assemblies to restore normal ignition

• One surface ignitor (spark electrode)

• Disconnect electrical power and shut off the gas supply before starting work
• Handle the ceramic electrode carefully; avoid touching or striking the ceramic tip
• Ensure all wiring connections are secure and routed clear of heat sources
• After installation, test each burner for proper spark and ignition before returning the appliance to regular use

This is the dual surface burner spark electrode for select gas cooktops/ranges. It generates the spark needed to ignite the burner, helping restore reliable lighting when a burner won't start or only lights intermittently.

• Produces the ignition spark at the burner head
• Helps address burners that won't ignite, click without lighting, or light inconsistently
• Can resolve weak or no spark conditions at the affected burner position(s)
• Restores dependable burner ignition when the original electrode is worn, cracked, or fouled

• Disconnect power and shut off gas supply before servicing
• Allow the cooktop/range to cool fully
• Access typically requires removing grates, burner caps, and top panel
• Handle the ceramic insulator carefully; avoid bending the electrode tips

This top burner spark igniter creates the spark that lights gas at the surface burner. Replacing a worn or cracked electrode restores fast, reliable ignition and helps stop burners that click but won't light.

• Generates a high-voltage spark at the burner head to ignite gas
• Common symptoms: surface burner won't light, no visible spark, intermittent ignition, or constant clicking
• Cracked ceramic, contaminated tip, or heat damage can prevent a good spark
• Direct replacement for the failed electrode on a single burner

• Disconnect power and shut off gas; allow the appliance to cool before service
• Note lead routing and bracket orientation; mount using the existing hardware per your model
• Keep the ceramic insulator clean and dry; avoid bending or touching the tip
• After installation, ensure burner base and cap are seated correctly; verify spark and ignition

This replacement top burner ignitor produces the spark needed to light gas on surface cooktops, restoring reliable ignition so burners light consistently. Ideal for repair of a single surface burner assembly. What it does:

• Generates the spark that ignites gas at a surface/top burner
• Replaces a cracked, broken, or non-sparking electrode
• Helps correct symptoms such as continuous clicking with no ignition, burners that won't light, or intermittent sparking
• Works as the electrode/ignition source mounted next to the burner cap

• Always disconnect power to the range and turn off the gas supply before servicing
• Handle the ceramic/porcelain insulator and electrode tip carefully to avoid damage
• Use basic hand tools;

This surface ignitor is the replacement part that creates the spark to light a cooktop burner, restoring reliable ignition for your gas range so burners light when knobs are turned. What it does:

• Generates the spark needed to ignite a surface burner
• Helps when a burner clicks but fails to light or only lights intermittently
• Addresses ignition problems caused by a cracked, worn or non-sparking ignitor
• Can reduce repeated clicking or delayed ignition

• Turn off the appliance power and shut off the gas supply before beginning service
• Handle the ceramic/porcelain ignitor carefully—it is fragile and can break if dropped
• Verify electrical connector is fully seated and free of corrosion before reassembly

The Range Oven Hot Surface Igniter Assembly is an essential component for maintaining the performance of your Samsung range. This genuine OEM part ensures reliable ignition, allowing your oven to heat efficiently and consistently every time you cook. Designed specifically for Samsung range models, it guarantees a perfect fit and seamless integration with your appliance. The hot surface igniter plays a crucial role in igniting the gas, providing steady and controlled heat for baking, roasting, and other cooking needs. Replacing a faulty igniter with this high-quality assembly can restore your ovenGÇÖs functionality, preventing delays and ensuring safe operation. Easy to install, the Range Oven Hot Surface Igniter Assembly offers a durable solution to keep your kitchen running smoothly. Trust in this genuine OEM part to deliver dependable performance and enhance your cooking experience with your Samsung range.

This surface burner igniter is the spark electrode that lights the flame on your gas cooktop or range. Replacing a worn electrode restores reliable ignition at the affected burner for fast, consistent lighting.

• Generates a high-voltage spark at the burner to ignite gas
• Positions and insulates the tip for consistent flame lighting
• Common symptoms: burner won't ignite or no spark at that burner
• Other signs: needs a match to light, intermittent/erratic spark, cracked ceramic

• Disconnect power and shut off gas supply; allow appliance to cool
• Remove burner cap and head to access the electrode; note wire routing and mounting
• Transfer any bracket/clip from the original part if required and set proper gap/position near the burner port
• Restore power and gas, then test ignition at the repaired burner