Range / Cooktop / Oven Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 814323
Replacement foot pad kit for range grates. Installs underneath grate legs to cushion and stabilize. Replace when worn, cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Lost one of the pads for the stove grates on our fridgadaire stove top Roger S. • Broken Arrow , OK • December 24, 2016
Orders set of four pads. Came in the mail about three days later. Replaced lost pad and it fit perfectly.
Read more
More
$13.61
- Compare At:
-
$16.20
- You Save:
-
$2.59
Genuine Lg part
By: Lg
Part Number: MJH64334701
The Oven Selector Knob Supporter is an OEM replacement part for LG ovens. It is a crucial component that provides structural support and ensures proper functioning of the oven selector knob mechanism.
Symptoms of a bad oven selector knob supporter:
- Loose or wobbly oven selector knob
- Difficulty in turning or selecting oven functions
- Knob becoming detached or falling off
- Misalignment or binding of the knob mechanism
Causes of a faulty oven selector knob supporter can include physical damage, wear and tear over time, or manufacturing defects that compromise its structural integrity or alignment.
This OEM LG part is also compatible with Sears/Kenmore ovens.
Do-It-Yourself Stories from Customers like You
Broke lever supporter on LG oven control knob. Mark N. • Downingtown , PA • December 22, 2021
Replaced the cheap plastic lever supporter with another LG OEM cheap plastic lever supporter. I should have bought two as I can see this problem happening again.
Job was a simple fix and only required a Phillips head screwdriver. I did not need to remove any connections as there was enough room and wire to pull out the oven control assembly and make the repair.
One word of caution is to be careful as the sheet metal internal cover and bottom of the control knob panel is razor...
Read more
More
$19.45
- Compare At:
-
$23.34
- You Save:
-
$3.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10162384
Seals oven door to prevent heat loss and improve cooking efficiency. Replace when brittle, frayed, or not sealing properly. Verify fit by model number.
This part fixes the following symptoms
-
Door won't close
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off. Joe D. • New Berlin , WI • March 20, 2019
First of all Appliance Parts Pros is the best!! I would not have had the confidence to make this repair myself without their outstanding videos and Q&A sections on their website. And their prices for parts are very competitive. Like many stories on the website, my oven would heat up beyond the temperature set point. When it reached the target temperature, the lower heating element (I think this is the “bake” element) would shutoff, but the top element (“broil” element I believe) would remain on...
Read more
More
$77.76
- Compare At:
-
$92.53
- You Save:
-
$14.77
Genuine Whirlpool part
By: Whirlpool
Part Number: 814399
Fix a burner that won't heat or has a charred connection. Burner receptacle replacement requires wire cutting, stripping, and splicing—about 30 minutes.
Do-It-Yourself Stories from Customers like You
Stove top burner receptacle needed to be replaced Nolan S. • Glastonbury , CT • April 30, 2014
Followed the instructions that came with the replacement part: made sure stove top was unpowered, unscrewed the old housing from the stove top, cut the wires, stripped some insulation off, attached the new wires with the (accompanying) wire nuts, attached new housing to stove top.
Read more
More
$33.70
- Compare At:
-
$40.10
- You Save:
-
$6.40
Genuine Ge part
By: Ge
Part Number: WB32X10013
Replace cracked, rusted, or stained 8-inch drip pans under coil burners on electric ranges and cooktops. Catches spills and protects cooktop surface.
Do-It-Yourself Stories from Customers like You
Baking element broke broiler never worked since I moved in 13 years ago and the four burners on the stove top were slowly dying Marybeth K. • Milltown , NJ • November 13, 2017
With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal...
Read more
More
$18.66
- Compare At:
-
$22.02
- You Save:
-
$3.36
Genuine Frigidaire part
By: Frigidaire
Part Number: 316545301
The Door Handle is an OEM part for Frigidaire ovens. It is designed to provide a secure grip for opening and closing the oven door. This handle is white in color and 29" in length. Please note, the mounting screws are not included with the handle.
You should replace the door handle if it becomes loose, damaged, or broken. Causes of a bad door handle can include regular wear and tear from frequent use, exposure to high temperatures, or accidental impacts that cause cracks or breaks. Over time, these issues can make the handle less effective or unsafe to use.
Symptoms of a bad door handle include:
- The handle feeling loose or wobbly
- Cracks or visible damage on the handle
- Difficulty in gripping or securely holding the handle
- The handle completely detaching from the door
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Door handle on our Frigidaire stove cracked and the screw opening was stripped Lillian W. • Cleveland , OH • September 08, 2019
We ordered a new handle and two screws. The part was very easy to find and was in stock. Shipped out in 2 days and delivered by fed -ex. My teenage son put the handle on in less than 5 minutes. very easy.
So happy we can finally use the oven again.
Read more
More
$91.53
- Compare At:
-
$109.84
- You Save:
-
$18.31
Genuine Whirlpool part
By: Whirlpool
Part Number: W11567368
The Control Assembly is an OEM part for Whirlpool ranges. This electronic control panel manages the various functions of the range, including oven temperature settings, cooking modes, and timer operations. It ensures precise control and operation of both the oven and stovetop elements.
Over time, the control assembly can fail due to electrical issues, power surges, or regular wear and tear. When the control assembly malfunctions, it can disrupt the range's functionality, making it difficult to cook or bake effectively.
Symptoms of a bad range control assembly include:
- The oven or burners not heating correctly
- Display errors or unresponsive control panel
- Inaccurate temperature settings
- The oven or range failing to turn on
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Mother board David C. • Hilo , HI • October 03, 2021
Exchange one MB with another MB. Just had to plug colored wires into the proper color code.
Read more
More
$200.18
- Compare At:
-
$220.20
- You Save:
-
$20.02
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823692
The Large Surface Element is an OEM component for Whirlpool ranges. As a key heat source, it withstands significant thermal stresses each use for cooking tasks. This surface element measures approximately 10” in diameter.
Over time, microfractures may accumulate in the ceramic glass from repetitive heating/cooling cycles. Mineral deposits also build up on the surface, reducing heat transfer effectiveness.
Symptoms involve:
- Inconsistent or diminished heat from the designated zone
- Noticeable cracks, clouding or chips in the glass material
- Safety hazards if integrity is lost, exposing electrical/gas
The element is compatible also for select KitchenAid and Maytag appliances.
Do-It-Yourself Stories from Customers like You
Element would stay on high even at lower settings why it would fail in the "high" mode is not a good design David M. • Suffield , CT • February 04, 2015
Replaced the Infinite Switch and that solved the problem. Did not need to replace the Surface Element
Read more
More
$142.41
- Compare At:
-
$169.47
- You Save:
-
$27.06
Genuine Ge part
By: Ge
Part Number: WB16K10055
The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.
Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.
Symptoms of a malfunctioning Medium Surface Burner include:
- Inconsistent flame size or failure to ignite
- Uneven heating or hot spots on the cookware
- Visible damage or corrosion on the burner itself
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Needed to replace ordered parts Craig J. • Liverpool , NY • July 24, 2015
Took off old, replaced with new. Cross reference worked well, all GE parts. Saved a lot of money compared to local supplier.
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Ge part
By: Ge
Part Number: WB31X5014
The 8 Inch Trim Ring is an OEM part for GE ranges and cooktops. It fits around the 8-inch burner elements, providing a clean, finished look while also helping to contain spills and crumbs on the stovetop.
Symptoms of a bad 8 Inch Trim Ring include:
- Misalignment or improper fit around the burner, which can affect cooking performance and cleaning.
- Visible rusting, warping, or deterioration, which can detract from the appearance of the cooktop.
- Loose fitting that may cause the ring to move or rattle during use.
Causes of a bad trim ring can include frequent exposure to high temperatures, spills of acidic or sugary substances that cause corrosion or damage, and general wear and tear from cleaning and use.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
If you’re looking to replace all of the trim rings and drip pans:
Do-It-Yourself Stories from Customers like You
Discolored burner rings and missing oven timer/clock knobs on 30 year old ge electric stove Edward S. • Marietta , OH • December 05, 2015
Replaced above parts, easy to do, looks like a new stove. Needed to pry open knob stem slot segments very slightly to remove broken plastic from previous knobs. Spreading stem slot metal sides too much and they will break. With slots cleaned out, pinch stem sides almost together for new knobs to slide on. Customer service rep was helpful and parts delivery was next day as promised. Before contacting Appliance Parts Pros, I found their on-line customer reviews were much better than their...
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7432P136-60
If your oven won't heat or igniter glows but gas won't light, the igniter is likely weak. This is a common DIY repair taking 15-30 minutes.
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Bake feature would not work but broil would operate Robert D. • Jefferson , WI • December 06, 2014
The bake (bottom burner) worked after replacing the ignitor. Becareful and do not drop the ignitor or the element will break. I found out the hard way. I bought the first ignitor at a local appliance store. After breaking that one, I found another at appliancepartspros.com for $20 cheaper. Thanks appliancepartspros!!!
Read more
More
$63.65
- Compare At:
-
$75.74
- You Save:
-
$12.09
Genuine Ge part
By: Ge
Part Number: WB02X24790
Protective bumper that cushions the burner grate and prevents scratching or denting the cooktop surface. Replace if cracked, worn, or missing.
Do-It-Yourself Stories from Customers like You
Burner bumpers missing Ralph H. • Healdsburg , CA • June 11, 2017
Bought and installed bumpers
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Genuine Ge part
By: Ge
Part Number: WB20K10015
Oven not reaching or maintaining temperature? A faulty temperature sensor often causes inaccurate heating. Moderate DIY repair with video guidance.
Do-It-Yourself Stories from Customers like You
F2 error code Guido P. • Cheyenne , WY • August 30, 2014
The actual replacement part number for my oven was WB21X5301, which costs $84.26, but this part actually fits perfectly (same hole sizes and position, same probe length, same resistance), and is less than 1/4 the price. Just removed the old probed and installed the new one.
Read more
More
$47.32
- Compare At:
-
$56.31
- You Save:
-
$8.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 318578506
Oven won't heat after self-cleaning? This high-limit thermostat cuts power when temperatures get too high. Moderately easy DIY repair fix.
Do-It-Yourself Stories from Customers like You
After self clean cycle oven heated very slowly and never got to temp Beth C. • Atkinson , NH • March 27, 2018
Online chat here said that the oven sensor should be replaced. I got the feeling that was a bit off, so I went with my gut and ordered the thermostat as well. Replaced the sensor and that didn't fix it. Replaced the thermostat and it worked like a charm! Disappointed that they were overconfident in their answer and it would have taken me more days to fix - but, the products came in quickly (basically, next day) and were correct. Online video for my particular oven was incorrect - but it's...
Read more
More
$53.21
- Compare At:
-
$63.85
- You Save:
-
$10.64
Genuine Ge part
By: Ge
Part Number: WB2X9719
The Support Bracket is an OEM part for GE ovens, designed to provide stability and support for the broiling element. This bracket is essential for ensuring the broiling element is securely positioned at the top of the oven, allowing for even heat distribution and optimal cooking performance when broiling foods.
Causes of damage to the support bracket often involve high heat exposure, accidental impacts during cleaning or cooking, or general wear and tear over time.
Symptoms of a bad Support Bracket include:
- The broiling element hanging lower than usual or touching the oven cavity, which can affect cooking performance and potentially damage the oven's interior.
- Unstable or loose broiling element, leading to uneven cooking or broiling.
- Visible signs of wear, damage, or corrosion on the bracket itself, indicating it may no longer provide adequate support.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014
Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds.
Read more
More
$8.69
- Compare At:
-
$10.43
- You Save:
-
$1.74
Genuine Ge part
By: Ge
Part Number: WB16X28654
Burner cap covers the burner head and distributes flame evenly on gas ranges and cooktops. Replace if cracked, warped, or missing for proper cooking.
Do-It-Yourself Stories from Customers like You
The knobs were missing Brendan O. • Charlotte , NC • March 25, 2022
I found the model and serial #'s. Looked them up on your website. You provided a diagram with part numbers. I ordered the parts. Your website made it extremely easy. Thank you.
Read more
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51