Range / Cooktop / Oven Touch Pad

This black clock overlay is the front label for the electronic oven control. Replacing a worn or peeling overlay restores clear button markings and a clean, factory look, making the control panel easy to read and use.

• Attaches to the electronic oven control (EOC) and labels the clock/timer and oven function keys
• Restores legibility when graphics are faded, cracked, bubbled, or peeling
• Refreshes the finished appearance of the control panel
• Works with the existing electronic control; cosmetic/labeling component

• Disconnect power at the breaker before servicing
• Remove the control panel/EOC as needed to access and remove the old overlay
• Clean and dry the mounting surface; align carefully and press evenly to apply
• Reassemble and restore power; keys correspond to the correct labels

This factory-specified parts assembly replaces a damaged or missing original assembly in your appliance. Restoring the correct fit and function of the affected components helps the unit operate as designed after wear, damage, or prior service.

• Direct replacement for the assembly identified in your model's parts diagram
• Can help resolve loose or misaligned components, vibration/rattling, or incomplete installation
• Matches original design for consistent fit and performance
• Useful when original pieces are lost or damaged during service

• Disconnect power before service; shut off gas or water if applicable
• Allow the appliance to cool; wear cut-resistant gloves for sharp edges
• Use your model's service manual/parts diagram to take reference photos
• Reassemble panels and test operation after installation

This control panel is the front user-interface assembly for your range/oven. It restores a clean, readable console so you can see the display and reliably select settings after the original panel is damaged or unresponsive.

• Provides the front control surface for selecting cooking modes, temperatures, and timers
• Supports and aligns the user interface components and display behind the console
• Replaces cracked, warped, or discolored panels to restore appearance and usability
• Typical symptoms include unresponsive or intermittent keys, blank/dim display, and worn or broken fascia

• Disconnect power at the breaker before servicing; for gas ranges, also shut off the gas supply per the manufacturer's instructions
• Remove console/backguard fasteners and carefully release any ribbon cables and harnesses
• Transfer any reusable items (overlay/keypad, lens, brackets, screws) from the old panel if required by your model
• Use ESD protection when handling electronics and ensure all connectors are fully seated before restoring power

This control panel houses the touchpad and display used to select settings and start cycles. It restores responsive controls and a readable display so you can operate and monitor your appliance's basic functions. What it does:

• Provides the user interface (buttons/touchpad) and display for selecting cycles and options.
• Sends user commands to the appliance's main control so selected functions start and run.
• Common symptoms it can fix: unresponsive or intermittent buttons, blank/flickering/displayed characters missing, or erratic control behavior.
• Designed as a direct-replacement panel to restore normal control and display operation.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Handle the panel and its electronic components carefully to avoid damage from impact or static discharge.
• Ensure wire harness connectors are fully seated and routed clear of heat or moving parts during reassembly.

This part is a replacement control panel assembly. This part can be used to replace a broken or defective control panel in a variety of oven models. The control panel ensures the user can properly and safely adjust and maintain the oven temperature and settings. The appliance may not work properly, if at all, if this part is broken in any way. Thus, it will need to be immediately replaced. Always disconnect power from the appliance before starting any work or repairs. It is recommended that work gloves are worn to protect the hands.This is a genuine OEM part made by GE and has been sourced directly from the manufacturer. As an authentic replacement part, this control panel assembly is suitable for use on ovens that have been manufactured by General Electric, Hotpoint, and some other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This replacement control panel restores a clean, finished look to your appliance's console area and provides a sturdy mounting surface for the user interface. It helps protect internal components and keeps controls properly positioned. What it does:

• Forms the exterior face and mounting surface for the console/backguard area
• Shields internal wiring and components from heat, spills, and impacts
• Keeps buttons, knobs, and display openings aligned and secure
• Common symptoms: dents, cracks, broken mounting points, loose or warped panel, controls not sitting flush

• 1 control panel

• Disconnect electrical power at the breaker or unplug the appliance; shut off gas supply if applicable
• Wear cut-resistant gloves—panel edges can be sharp
• Remove console/backguard screws, then transfer any brackets or clips from the old panel to the new one
• Tighten mounting screws evenly and confirm control alignment before restoring power

Color: White

Replacement faceplate graphics assembly restores clear, readable labels and markings on your appliance control panel so you can select settings and understand controls easily. Ideal when printed icons or text are faded, scratched, or peeling. What it does:

• Replaces worn or illegible control panel markings so button and dial functions are easier to read
• Restores the original look of the control console by replacing scratched or discolored graphics
• Keeps settings and cycle labels visible to reduce user error
• Helps maintain resale appearance by repairing cosmetic damage

• Disconnect power to the appliance before beginning any work
• Removal of the control console or front panel may be required; keep fasteners and small parts organized
• Handle the graphic surface carefully to avoid scratches or fingerprints during installation

Replace a damaged or worn console with this control panel assembly. It restores a clean, secure mounting surface for the user controls and helps protect internal components so your appliance looks right and operates as intended.

• Houses and supports the user interface components (buttons/knobs/keypad and display bezel)
• Keeps controls aligned and securely mounted for proper operation
• Shields internal wiring and control electronics from incidental contact
• Helps resolve issues like loose controls, cracked or warped console fascia, and heavy cosmetic wear

• Disconnect power at the breaker or unplug the appliance before starting; shut off gas supply if applicable
• Remove any knobs/trim and the screws securing the old panel; support the panel while detaching
• Transfer required hardware, bezels, and brackets from the original panel to the new one
• Reassemble carefully and verify controls move freely before restoring power

This glass/touch board assembly replaces a cracked or unresponsive front glass control panel and touch controls, restoring a clean surface and reliable input for affected GE appliances. What it does:

• Replaces the front glass and integrated touch/control interface used to select functions and settings.
• Restores responsive touch input when the original glass or touch surface is cracked, chipped, or unresponsive.
• Resolves common symptoms like unregistered touches, intermittent control response, or visible glass damage.
• Works with the existing connector and mounting points to integrate with the appliance's control electronics.

• Disconnect power at the breaker or unplug the appliance before beginning any work.
• Handle the glass carefully to avoid cuts and prevent damage to the new assembly.
• Inspect and reconnect wiring harnesses and grounding per the service manual; ensure connectors are fully seated.

This control panel overlay restores the labeled clock/timer area and button markings on your oven or range so the display and controls are easy to read and use. It replaces a cracked, faded or worn clock overlay for a cleaner finish. What it does:

• Replaces the worn or damaged clock/timer graphic area on the control panel
• Restores button labels and display visibility for accurate clock and timer operation
• Improves appliance appearance by covering scratches, discoloration, or peeling
• Helps prevent dirt and moisture from contacting the printed control area

• Designed to fit the original location; inspect mating surface and alignment before final placement
• Remove power to the appliance before starting any work to avoid electrical shock
• May require removal of the control panel or trim pieces; keep screws and fasteners organized
• If adhesive is used, ensure the surface is clean and dry for proper adhesion

This is a range control panel insert. This part fits over the top of the control panel and marks the burner control settings. Over time, the control setting markers on this part could wear off so that they can no longer be seen. If this is the case, the control panel insert can be replaced so that the correct settings can be used. If this part becomes discolored or otherwise worn in any way, the appliance owner may wish to replace it for cosmetic reasons. Unplug the oven unit from its power source prior to attempting to replace this part. The person performing the replacement may wish to wear gloves to protect the hands during this process.This part is compatible with electric ranges that are manufactured by the GE brand. It is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually.

This control panel console assembly houses the user interface and display for the range, restoring reliable button/touch input and clear visual feedback so you can set cooktop and oven functions with confidence. What it does

• Provides the keypad/touch controls and display used to set temperatures, timers, and cooking modes.
• Replaces a cracked, faded, or damaged console that impairs operation or visibility.
• Use when buttons or touch controls are unresponsive, the display is blank or dim, or inputs register intermittently.
• Helps correct erratic or inconsistent control behavior caused by a damaged panel assembly.

• Disconnect power (unplug or turn off the breaker) before beginning any service.
• Follow model-specific disassembly steps to remove the backguard/console; handle glass and overlays carefully to avoid damage.
• Ensure all wire harness connectors are fully seated and routed without pinching; do not force connectors.

This stainless steel control panel assembly is the user interface for your appliance. Replacing a worn panel restores a clean look and reliable button operation when the original is cracked, dented, or the keys stop responding.

• Provides the buttons and labels used to select settings and cycles
• Sends keypad selections to the appliance's control
• Secures the user-interface components at the front of the unit
• Typical symptoms: unresponsive or intermittent buttons, stuck keys, cracked/dented console, worn or illegible labels, loose panel

• Disconnect power at the breaker before servicing
• Support the panel as you remove screws to avoid straining wiring
• Carefully release and reconnect any ribbon/plug connectors; keep contacts clean and unbent
• Reuse mounting hardware and transfer any trim or brackets from the original panel; test all buttons after reassembly

This overlay is the exterior cover for the appliance's control panel, providing the labeled surface and cosmetic finish that users interact with. It restores readable button markings and protects the underlying controls from wear. What it does:

• Replaces faded, scratched, or peeled control-panel graphics so buttons and labels are visible.
• Covers and protects the underlying switch/keypad area from spills and everyday wear.
• Helps resolve user issues caused by missing or unreadable button markings.
• Restores the appliance's finished appearance when the original overlay is damaged.

• Disconnect power to the appliance before starting any work to avoid shock or injury.
• Remove any surrounding trim or bezel to access and replace the overlay.
• Handle the overlay carefully to avoid scratching the printed surface; align precisely before seating or adhering.
• If adhesive or clips are used, follow OEM instructions.

This bisque clock overlay restores the finished look of the range control panel and provides a clean face for the clock and control indicators. It replaces a cracked, faded, or missing overlay to improve appearance and readability. What it does:

• Covers and protects the clock/display area on the control panel
• Restores printed markings and a uniform finish for easier time reading
• Helps prevent dirt and debris from collecting on the clock face
• Useful when the existing overlay is cracked, discolored, or peeling

• One bisque clock overlay

• Disconnect power to the appliance before beginning any work
• Removal may require accessing or removing the control panel; follow model-specific service instructions
• Handle carefully to avoid scratching or bending the overlay during installation
• Use only manufacturer-recommended fasteners or adhesive as applicable for your model