Range Hood Parts

A lampholder bucket that secures the oven/stove lamp socket and positions the bulb for proper illumination. Replaces damaged or melted lamp housings to restore the light assembly and protect wiring from heat. What it does:

• Holds and aligns the oven/stove lamp socket and bulb in the cavity
• Shields the socket and wiring from oven heat and grease
• Helps ensure stable electrical contact for consistent illumination
• Prevents the bulb from shifting or contacting other components

• Disconnect power to the appliance before servicing to avoid shock
• Replace with the exact OEM bucket to ensure correct fit and heat resistance
• Inspect the lamp socket and wiring; replace any damaged components
• Use basic hand tools; refer to the appliance service manual for disassembly steps

This is a threaded machine screw used to fasten appliance panels and components. It restores secure attachment points so panels, brackets, and assemblies stay firmly mounted and reduce rattling or misalignment. What it does

• Secures panels, brackets, or small components to the appliance chassis
• Restores loose or missing fasteners that cause vibration, rattling, or unsecured parts
• Provides the correct thread engagement to prevent stripped holes when installed properly
• Works wherever an 8-18 threaded screw is specified by the manufacturer

• Disconnect power to the appliance before beginning any repair.
• Use the correct screwdriver or nutdriver to avoid stripping the head.
• Do not overtighten; snug until secure to prevent damage to threads or panels.
• Follow manufacturer service instructions for safe disassembly.

Note: This filter is approximately 12" x 14". (Qty of one)

This Grease Filter is an OEM part for GE range hoods. As a key filtration component, this rectangular filter works to capture cooking emissions like grease, smoke and odors above the cooktop. It prevents these contaminants from recirculating back into the kitchen or home.

Causes of a bad filter can include excessive use over time, washing with improper cleaning solutions, or damage during removal/installation.

Symptoms of a bad filter include:

• Reduced airflow and suction from the range hood
• Grease or smoke escaping from the hood despite ventilation usage
• Unpleasant cooking smells lingering in the kitchen

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

Includes 1 filter

This slide switch is the user control that changes settings by sliding a selector—commonly used on appliance control panels to select cycles or options. It restores reliable tactile control and clear position feedback. What it does:

• Acts as the sliding selector on the appliance control panel to change settings or modes
• Completes or interrupts the control circuit when moved to different positions
• Commonly replaces a worn, sticky, or non-responsive selector that fails to change settings
• Helps eliminate intermittent or no-response symptoms caused by a damaged slide actuator

• One slide switch

• Disconnect power before attempting replacement to avoid shock or injury
• Access may require removing the control panel or console—keep fasteners organized
• Verify switch orientation and wiring before disconnecting; note wire locations or take a photo
• No calibration is typically required after replacement; test functions before full reassembly

This replacement blade-fan moves air inside the appliance to help maintain proper temperature and prevent ice buildup. It restores airflow so the appliance can cool and cycle as designed. What it does

• Circulates air over coils and compartments to support even cooling
• Helps prevent frost accumulation and hot spots caused by poor airflow
• Commonly replaced when airflow is weak or the fan is noisy or damaged
• Works with the original fan motor hub to spin smoothly and efficiently

• One blade-fan

• Disconnect power before beginning any repair to avoid electrical shock
• Handle the fan blades carefully to avoid bending; a warped blade can vibrate or rub
• Inspect the fan hub and motor before installation; replace damaged mounting hardware as needed

Color: Black

24 inch, 20 watts, 4100k, 1200 lumens, T12.

This rocker switch replaces a worn or failed control switch to restore reliable user control of the appliance. It fits the original switch location and provides a simple, replaceable interface for operating the circuit. What it does

• Acts as the user-facing rocker control to open and close the electrical circuit for the function it controls.
• Replaces intermittent or non-responsive rocker behavior so buttons toggle correctly.
• Common symptoms it addresses: switch doesn't actuate, feels loose, or the controlled function won't turn on/off.
• Works as a direct replacement for the original rocker control found behind the panel.

• One rocker switch

• Disconnect power (unplug appliance or shut off breaker) before starting any repair.
• Remove necessary access panels and use basic hand tools to replace the switch; handle wiring and terminals carefully.
• Verify correct switch operation before reassembling trim and panels.

This ring nut is a small threaded securing nut used to fasten and stabilize appliance fittings and components. It helps keep connections tight and parts properly seated for reliable operation. What it does:

• Secures threaded fittings or assemblies to prevent loosening during use
• Holds components in place on burners, valves, or other hardware where a retaining nut is required
• Worn or stripped ring nuts can cause loose components, rattling, or leaks at connections
• Replacing a damaged ring nut restores proper mechanical retention and alignment

• One ring nut

• Disconnect power and shut off water/gas before starting any repair
• Use the correct-size wrench or socket; start threads by hand to avoid cross-threading
• Tighten snugly but avoid over-torquing, which can strip threads or damage fittings
• Inspect mating threads and any seals or gaskets; replace if damaged

This is a replacement grease trough that collects and channels grease and food soil away from the wash area, helping keep the dishwasher base cleaner and preventing buildup around components. Fits the 16.75-inch trough opening. What it does:

• Captures and directs grease and runoff toward the drain area to reduce pooling under the tub
• Helps prevent grease buildup on lower components and sensors that can affect performance
• Restores proper flow path when a cracked or warped trough causes leaks or overflow
• Maintains a cleaner interior environment, reducing odors linked to trapped grease

• One grease trough (16.75 in.)

• Designed as a direct-replacement part; inspect surrounding seals and fasteners while installing
• Disconnect power and water to the appliance before beginning any service
• Handle edges carefully and use recommended tools; replace any damaged clips or seals for a secure fit
• If you see persistent leaks after replacement, recheck alignment and mounting hardware before returning the appliance to service

This chimney is the exterior cover that finishes and protects the range hood's vertical duct area, restoring a clean, finished look and proper airflow path for vented hoods. It replaces damaged or missing hood chimneys. What it does

• Covers and conceals the hood's ductwork for a finished appearance
• Helps direct exhaust from the hood up into the household ducting
• Replaces bent, dented or missing chimney panels that expose ducts
• Restores proper fitment and alignment of the hood's upper section

• Disconnect power to the hood before servicing electrical or internal components
• May require two people to hold and align the chimney during installation
• Use original mounting hardware when possible; inspect screws/brackets and replace if damaged
• Check for proper sealing to the duct and adjust alignment for a snug fit