Need Help?
Call
The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.
Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.
Symptoms of a malfunctioning Medium Surface Burner include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Took off old, replaced with new. Cross reference worked well, all GE parts. Saved a lot of money compared to local supplier. Read more
This metal bracket provides structural support for range components like burner assemblies or control panels. It securely holds parts in their proper position during normal cooking operations. Replace when range components become loose, sag, or don't align properly.
Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds. Read more
The Tri-Ring Burner Assembly is an OEM part for GE gas cooktops and ranges. It contains the three front right burners, grates, and supporting brackets. Causes of a bad burner assembly can include cracked or warped burner heads from prolonged heat exposure. Deterioration of internal gas pipes and orifices may also diminish flame and heating performance. Symptoms of a bad Tri-Ring Assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore branded appliances.
Flame was irregular so i noticed it was bent. Perhaps it was from cold / hot washing but that aluminum alloy is tough stuff. Just out of warranty so I replaced burner and all is well. Read more
Replace cracked, rusted, or stained 8-inch drip pans under coil burners on electric ranges and cooktops. Catches spills and protects cooktop surface.
With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal... Read more
Oven door window pack assembly includes glass pane and frame for viewing food while cooking. Replace if cracked, shattered, or broken from heat damage.
Ordered part using phone support to confirm correct part. Came fast. Used video on YouTube (not exactly the same but close enough) to help. Need Torx #15, 20 but no other special tools. Straight forward job. Be careful handling the broken glass! Read more
Oven won't heat or light? This gas range igniter glowbar ignites the burner for proper heating. Moderate DIY repair, 20-30 minutes typical install.
From YouTube videos I was sure the issue was a blown igniter. There were numerous examples of how to replace the igniter on YouTube and the repair was pretty easy. Getting at the igniter was a bit awkward and I had to disconnect gas to get access to back of oven but the whole process only took 20-25 minutes. Read more
Converts your gas range from natural gas to liquid propane fuel. Includes all orifices and instructions. Needed when switching fuel types or missing parts.
Replace a non-heating or weak 8-inch surface burner with this radiant element. Requires lifting the cooktop and Torx screwdriver. Moderate DIY repair.
I ordered the 8 inch Haliant Element from Appliance Parts Pro with overnight shipping (I needed to have it working for Easter weekend!) and it arrived when promised and in perfect condition! To replace, you need a couple of boards longer than the stove is wide to hold the stove above the counter. You will also need a T15 Torx head on a handle or socket wrench. It also helps to have some pliers, and a second person to slip the boards under and out from the stove when you lift it. First, shut... Read more
The Door Handle is an OEM part for Frigidaire ovens. It is designed to provide a secure grip for opening and closing the oven door. This handle is white in color and 29" in length. Please note, the mounting screws are not included with the handle.
You should replace the door handle if it becomes loose, damaged, or broken. Causes of a bad door handle can include regular wear and tear from frequent use, exposure to high temperatures, or accidental impacts that cause cracks or breaks. Over time, these issues can make the handle less effective or unsafe to use.
Symptoms of a bad door handle include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
We ordered a new handle and two screws. The part was very easy to find and was in stock. Shipped out in 2 days and delivered by fed -ex. My teenage son put the handle on in less than 5 minutes. very easy. So happy we can finally use the oven again. Read more
Burner won't ignite or sparks intermittently? This spark ignition switch and harness assembly restores reliable ignition. Moderate DIY repair.
After watching Simon's helpful and well-presented video, I fixed this with my son. Everything went smoothly! We really loved Simon's, "Ok, time to cook now. No more excuses!" Read more
Oven won't heat or light? This igniter powers both bake and broil burners. Most DIYers replace it in 10-25 minutes with basic hand tools.
The oven would not heat up but the broiler and stove top burners all worked so I replaced the igniter. The part arrived quicker than I expected - one day with regular shipping - and the repair also went much quicker than expected. After accessing the igniter I was able to unplug the plastic modular connection. Instead of pulling the oven out from the wall - which would have been a huge pain - I was able to reach the plug by removing the bottom storage drawer under the oven. From there it was... Read more
Oven not heating or baking unevenly? The bake element provides bottom heat for baking. Easy DIY fix—just 2 screws and wire connectors. Takes 15 minutes.
1) ordered new boiler element after searching for oven/stove model # online 2) unplugged oven 3) removed 2 screws holding element in place 4) pulled out the element and a length of wires attached to the element (enough that the wires wouldn't pull back into the hole after detached) 5) used needle-nosed pliers to detach wire clamps, noting which wire attached to which side of the old element 6) removed old element and its pieces from the bottom of oven 7) attached wires to new element,... Read more
Replacement control knob for cooktop burners. Installs on control panel stem. Replace worn, cracked, broken, or missing knobs for proper appearance.
Contacted you they correctly identified right part needed. Item was received within 48 hours of ordering. Very pleased with service and delivery time. Read more
Burner not heating? This 5.5" radiant element fits beneath glass cooktops. Common fix for non-working burners. Moderate DIY, 20-30 minutes to replace.
Raised ceramic top, removed old element, installed the new one. Read more
Replace your range oven door seal when heat escapes or it's cracked. Seals oven perimeter for proper temperature control. Confirm fit with model number.
First i called sears parts direct to order this part, because that is where i purchased my electric range. they had an outrageous price of $98. unbelievable to think that such a small piece of rubber could cost that much. i also called a few other parts dealers on other websites. they also had high prices. when i called appliance parts pros they cut the cost by 50%. i am not sure if i could have found a better price because i stopped there. it is exhausting and time consuming to have to compare... Read more
Burner won't light or spark? This top burner igniter creates the spark to ignite gas on your stovetop. Easy DIY repair in under 5 minutes with a screwdriver.
After many years of excellent service the burner I use most often on the top of my JenAir range rusted through. After trying to remove the burner, which was firmly rusted into place, I decided to replace the cooktop pan, both burners and igniters. It was an easy repair to swap out the new parts for the old, and the only tool necessary was a #2 phillips screw driver. The only difficulty was that although the cooktop pan appears symmetrical, the screw hole pattern on each side is different. I did... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.