Refrigerator Cap Or Cover

This thermistor cover shields and positions the refrigerator's temperature sensor so it reads cabinet air accurately. Replacing a cracked or missing cover helps restore stable temperatures and normal cooling performance.

• Holds the thermistor in place and shields it from direct airflow for accurate temperature sensing
• Helps prevent erratic temperatures, overcooling/undercooling, or long run times caused by an exposed sensor
• Commonly replaced when the original cover is cracked, loose, or missing
• Supports consistent temperature control by ensuring proper sensor placement

• Disconnect power before servicing
• Remove shelves/bins as needed to access the sensor location
• Align the thermistor and seat the cover fully; engage tabs or reuse existing hardware per model
• Avoid pinching the sensor or wiring and verify the cover is snug

This evaporator fan cover protects and directs airflow around the evaporator fan to help maintain proper cooling and reduce fan noise. Replacing a damaged cover restores airflow and helps prevent fan interference from ice or debris. What it does:

• Channels cold air from the evaporator across the compartments for more even cooling.
• Shields the evaporator fan from ice buildup, frost, and loose insulation that can block airflow.
• Prevents fan blade contact with debris or wiring that can cause scraping, rattling, or excessive noise.
• Common symptoms: poor or uneven cooling, loud/scraping fan noise, visible cracks or broken mounts on the cover.

• Disconnect power to the appliance before starting any repair.
• Remove the freezer/refrigerator access panel and any shelves; handle sharp sheet metal carefully.
• Inspect the fan blade and motor while the cover is off; clear any ice or debris and ensure the fan turns freely before reassembly.
• Ensure the replacement cover seats securely and any mounting tabs align to restore proper airflow direction.

This upper hinge cover fits the left-hand side and snaps over the top door hinge in a gray finish. It protects the hinge hardware and restores a clean, finished look when the original cover is cracked or missing.

• Conceals upper hinge hardware on the left side for a clean appearance
• Shields the hinge area from dust and minor spills
• Helps prevent snagging or damage to wires routed through the hinge area on some models
• Typical symptoms: broken, loose, or missing hinge cover

• Disconnect power to the appliance before servicing
• Remove any retaining screw(s) or release tabs from the old cover; keep original fasteners for reuse
• Align the new cover over the hinge and snap or secure into place
• Support the door before loosening fasteners

This cover replaces a cracked, warped, or missing cover on your appliance. It protects internal components and restores the correct fit and finish so parts stay secured and the unit operates as designed.

• Shields internal components from debris and moisture
• Helps maintain proper airflow, water path, or guarding as designed
• Restores fit/finish and keeps parts secured
• Common signs of failure: cracks, broken tabs, discoloration, or a cover that won't stay in place

• Disconnect power and shut off water/gas before servicing
• Note the original orientation and transfer any screws/clips from the old part
• Align tabs and fasteners; avoid overtightening to prevent damage
• After installation, test operation and ensure no interference or leaks

This is an evaporator cover and fan assembly that is used for the fresh food sections on refrigerators. This component makes up the back wall of the fresh food compartment and circulates the air over the evaporator to keep the food longer. If food is not staying as fresh for as long, it's a good idea to check this part for any damage and to ensure that it is working properly. The motor makes noise, such as a high pitched sound, if the evaporator fan motor is going bad. If that's the case, the entire evaporate and fan assembly will need to be replaced. Disconnect the refrigerator from its power source before replacing this part. Wear work gloves to protect the hands during this process.This evaporator cover and fan assembly is sold individually. It's a genuine OEM part that comes straight from the manufacturer. This part is compatible with refrigerators that are manufactured by GE.

This water filter cover encloses the refrigerator's filter housing for a clean look and protection. Replace a cracked, loose, or missing cover to restore a secure, smooth-opening access door for routine filter changes.

• Covers and protects the water filter in the fresh food compartment
• Opens to provide access when replacing the filter
• Helps prevent items from catching on the filter or housing
• Replace if the cover is cracked, the hinge or latch is broken, it won't stay closed, or it's missing

• Disconnect power and shut off the water supply before servicing
• Open the filter area and release the retaining tabs or hinge pins to remove the old cover
• Transfer any screws or hinge pieces from the original part if required
• Align and snap or secure the new cover; verify smooth opening and closing

The Refrigerator Drain Cap Assembly is an essential component for maintaining the efficient operation of your Samsung refrigerator. This genuine OEM part ensures a precise fit, promoting optimal drainage and preventing potential leaks or clogs. Designed specifically for Samsung refrigerator models, the drain cap assembly helps manage excess moisture, keeping the interior of your fridge dry and hygienic. Its durable construction guarantees long-lasting performance, reducing the need for frequent replacements and ensuring your appliance runs smoothly. Installing the Refrigerator Drain Cap Assembly is straightforward, allowing you to restore your refrigerator's functionality with ease. By choosing this genuine OEM part, you benefit from reliable quality and compatibility, ensuring that your refrigerator continues to operate at its best. Whether you're addressing a current issue or performing routine maintenance, the Refrigerator Drain Cap Assembly provides a dependable solution to keep your Samsung refrigerator functioning efficiently and effectively.

This refrigerator housing is the molded support used to mount and protect its associated components inside the appliance. Replacing a damaged housing restores a secure fit and proper alignment so parts stay in place and function correctly.

• Provides structural support and mounting points for the related controls/components
• Helps route air and/or wiring as designed by the manufacturer
• Restores proper alignment to reduce rattles, rubbing, or interference
• Symptoms can include cracked plastic, broken tabs, loose or sagging assemblies, or components that won't stay secured

• Disconnect power before servicing; shut off water as needed if working near dispenser/ice components
• Transfer sensors, wiring, controls, and hardware from the original housing unless new parts are supplied
• Reuse original screws/clips; avoid overtightening to prevent cracking
• Verify harness connections and clearances before restoring power and water

The Refrigerator Cover Relay is an essential component for maintaining the optimal performance of your refrigerator. This genuine OEM part ensures reliable electrical connections, which are crucial for the smooth operation of your appliance. By replacing a worn or faulty cover relay with the Refrigerator Cover Relay , you can prevent common issues such as power interruptions and inefficient cooling, thereby extending the lifespan of your refrigerator. Designed to fit a variety of Samsung refrigerator models, this cover relay offers a secure and precise fit, making installation straightforward and hassle-free. Using a genuine OEM part guarantees that you receive a product that meets the highest quality standards, ensuring consistent and effective performance. Whether you're addressing electrical problems or performing routine maintenance, the Refrigerator Cover Relay provides a dependable solution that enhances the functionality and reliability of your Samsung refrigerator. Trust in this genuine OEM part to keep your refrigerator running smoothly and efficiently, providing you with peace of mind and a better overall cooling experience.

The Cap Filter is an OEM component for Whirlpool refrigerators. Located inside the back of the fresh food compartment, it helps maintain optimal indoor air quality by capturing household odors and gases.  

The precision-woven filter media effectively removes ethylene and other contaminants from circulating air without slowing airflow. Its secure mounting design installs and removes easily without tools for periodic replacement.

Causes of a faulty cap filter include clogging from accumulated particles or moisture remaining trapped over time, which reduces effectiveness.

Symptoms of a bad cap filter can include: 

• Lingering odors inside the refrigerator  
• Fresher items absorb smells faster than usual
• Decreased airflow causing warmer temperatures
• Small pieces of filter shedding inside

Replace yours today with this genuine Whirlpool filter to restore maximum odor protection. Compatible with many Kenmore, Maytag, Jenn-Air, and KitchenAid models.

Color: White

Black

This evap coil cover protects the evaporator and helps direct airflow for more consistent cooling. It replaces damaged or missing covers to reduce frost buildup, keep debris away from the coil, and help prevent interior leaks. What it does:

• Shields the evaporator coil from ice, debris and accidental contact to protect coil fins.
• Helps channel airflow across the coil for improved cooling performance.
• Can reduce frost accumulation and related moisture or dripping symptoms.
• When cracked or missing, you may notice increased frost, water in the cabinet, or reduced cooling.

• Always disconnect power to the appliance before servicing.
• Remove interior liners or access panels to reach the evaporator; handle coil fins and insulation carefully.
• Reinstall any mounting clips, grommets, or insulation exactly as removed to maintain fit and sealing.

This replacement cover hinge secures and pivots the appliance cover so the lid or top opens and closes smoothly. Restores proper alignment and support for safe, reliable operation. What it does:

• Provides a durable pivot point for the appliance cover or lid
• Replaces worn, cracked, or broken hinge that causes sagging or misalignment
• Helps eliminate rubbing, catching, or noisy operation when opening/closing
• Restores proper fit to prevent gaps and improve safety when the cover is closed

• One cover hinge

• Disconnect power before servicing
• Support the cover or lid while removing fasteners to prevent it from falling
• Use appropriate hand tools; retain original fasteners unless replacement hardware is supplied
• After installation, verify smooth operation and secure mounting before returning appliance to service

This tower bottom for the freezer compartment mounts beneath the evaporator/tower assembly and directs cold air while protecting internal components. It helps maintain proper airflow and supports the evaporator area for reliable cooling performance. What it does

• Supports and secures the lower portion of the freezer tower/evaporator assembly
• Channels cold air from the evaporator into the freezer compartment for even circulation
• Shields wiring and small components from ice buildup and physical damage
• Can reduce rattling or loose panel noise when the original part is cracked or broken
• Commonly replaced when the tower is cracked, warped, or missing mounting tabs

• One tower bottom (freezer) piece

• Disconnect power to the refrigerator before starting any repair to avoid shock or injury
• Removal typically requires taking out interior liners or trim panels; keep fasteners organized
• Handle plastic parts carefully to avoid breaking tabs; use appropriate tools to pry or lift panels