Refrigerator Control Board

This electronic control board is the appliance's main logic module, managing cycles, timing and the user interface to restore responsive controls and proper operation. Ideal when pushbuttons, displays or automatic functions fail. What it does:

• Controls cycle selection, timing and program sequences for the appliance's functions.
• Sends signals to motors, valves and heaters so components run at the correct times.
• Interfaces with the user controls and display; helps interpret button presses and touch inputs.
• Common symptoms this part can cause: unresponsive controls or display, stuck or non-advancing cycles, random errors or failure to start.

• One electronic control board

• Disconnect power before beginning work to avoid electric shock.
• Handle the board by the edges and avoid touching components; use an anti-static strap if available.
• Compare the replacement board to the original to ensure matching connectors and mounting points.
• Reassemble panels and verify operation.

This electronic main control board coordinates your refrigerator's cooling system and user interface. Replacing a failed board can restore stable temperatures, proper defrosting, and responsive controls across the refrigerator and freezer compartments. What it does:

• Regulates compressor and fan operation using sensor feedback to maintain set temperatures
• Controls automatic defrost cycles to prevent frost buildup
• Interfaces with the human-machine interface (HMI) for button/display functions
• Common failure symptoms: fridge/freezer too warm, compressor or fans not running, unresponsive or erratic controls, or repeated relay clicking

• 1 main electronic control board assembly

• Disconnect power before servicing; use ESD protection when handling electronics
• Photograph wiring and move connectors to the new board one at a time; transfer any jumpers or mounting parts from the original
• Ensure all connectors are fully seated and covers reinstalled before restoring power
• After installation, set temperatures and allow up to 24 hours for cooling to stabilize

This compressor board kit replaces the compressor's control board to restore reliable compressor start and run behavior. It helps address compressor start failures and intermittent cooling so the appliance can return to normal operation. What it does:

• Replaces the compressor control/relay board that manages compressor startup and operation.
• Can stop or reduce symptoms such as the compressor not starting, repeated clicking/humming, or intermittent cooling.
• Provides the electrical interface between the compressor and the appliance power/control circuits.
• Helps isolate electronic control failures from mechanical/sealed-system issues.

• Disconnect power to the appliance before beginning any service.
• Handle the circuit board by its edges and avoid static discharge; use basic hand tools.
• Verify harness and connector compatibility with the appliance before installing.

This power control board assembly regulates power and control signals for the appliance, restoring reliable electronic control and normal operation when the original board fails. It replaces a faulty main control to stop intermittent power or unresponsive controls. What it does:

• Supplies and distributes power to the appliance's control circuits
• Controls user interface and command processing for cycles and functions
• Can cause no-power, intermittent power, or failure to respond when faulty
• May trigger control-related error codes or unexpected shutdowns

• Disconnect all power before starting—risk of electric shock
• Handle the board by edges and avoid static discharge; use ESD protection
• Transfer connectors and any attached harnesses exactly as removed
• Test appliance operation and all functions after installation;

This user interface assembly restores the front control panel and touch/display functions, so you can reliably set oven modes, temperatures, and timers. Fits dovetail-style front consoles in compatible ranges. What it does:

• Replaces the console's touch/display module that controls oven functions and shows settings
• Restores response to button presses and visible status indicators when the original is unresponsive
• Interfaces with the oven's control electronics to send user commands to the main control board

• Disconnect power to the appliance (unplug or switch off circuit breaker) before attempting any service
• Handle the display and ribbon cable carefully; avoid touching contacts or bending connectors

This adaptive defrost control module manages a refrigerator's defrost cycles to reduce unnecessary defrosting and help maintain proper cooling performance. It replaces the original control board that times and initiates defrost events. What it does:

• Monitors fridge activity and initiates defrost cycles based on usage patterns to avoid excess frost buildup
• Controls the defrost heater and terminates defrost when appropriate to protect the evaporator
• Can prevent frequent or missed defrosts that lead to frost-covered evaporator coils
• Commonly replaced when the freezer or refrigerator shows repeated frosting, long run-times, or inconsistent cooling

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Replace the module in the control housing; handle the board carefully to avoid static damage
• Verify wiring matches the original and secure all connectors; note orientation before removal
• Restore power and observe a few cycles to confirm the unit is initiating/terminating defrosts correctly

This control assembly is the console electronics that manage the oven/range user interface, display and temperature control. Replacing a faulty control restores responsive keys, accurate displays and reliable oven operation. What it does:

• Regulates oven temperature and cooking cycles via the console electronics.
• Provides the front display, clock and touch/keypad input processing.
• Can resolve symptoms like unresponsive buttons, blank or erratic display, or oven not starting.
• Works with the range/oven's wiring harness and sensors to execute user commands.

• Disconnect power at the breaker or unplug the appliance before beginning work.
• Protect the PCB from static: handle by edges and avoid touching circuitry.
• Verify wire connections match the original harness before powering on.

3-cycle mechanical timer that controls the sequence and timing of wash cycles, restoring proper cycle advancement and operation for washers that won't advance or complete cycles. Fits in the original timer location to re-establish cycle control. What it does:

• Rotates the cam to advance cycle stages and routes power to the motor, pump and valves.
• Restores cycle sequencing when a machine stops mid-cycle or won't advance to the next step.
• Replaces worn or non-indexing timers that cause intermittent or no cycle movement.
• Transfers timed electrical signals to start/stop agitation, spin and drain functions.

• Disconnect power to the appliance before starting — risk of electrical shock.
• Document or photograph all wire locations before disconnecting to ensure correct reconnection.
• Install in the original orientation; secure mounting hardware and avoid forcing gears or tabs.
• After installation, run a complete cycle to ensure proper operation.

The Svc Pcb Assembly is an OEM part for LG refrigerators. As the service printed circuit board assembly, it controls refrigeration components responsible for cooling and temperature regulation. Proper functioning of the svc pcb assembly is crucial to overall refrigerator performance.

Causes of a bad svc pcb assembly can involve failure of electronic components due to extended use. Exposure to moisture ingress or temperature fluctuations may also potentially damage circuitry over time.

Symptoms of a bad svc pcb assembly include:

• Erratic internal temperatures
• Issues with ice production or freezing features
• Lights or error codes displaying appliance faults
• Inability to properly maintain set temperatures

This OEM LG part is also compatible with some Kenmore models.

This is the main PCB control board that manages the appliance's electronic functions and user interface, restoring control when the original board has failed. Replaces a damaged or unresponsive main control module to return normal operation. What it does:

• Receives input from buttons/sensors and directs power to motors, valves, heaters, and displays
• Helps regulate cycle selection, timing, and safety interlocks
• Common symptom: appliance is unresponsive or won't start
• Common symptom: erratic behavior, incorrect cycles, or display errors
• Common symptom: intermittent power or control lockups

• One main PCB assembly

• Disconnect power and water before starting any repair
• Handle board by edges and avoid static discharge; use ESD protection if available
• Verify all connectors are fully seated and routed the same as original before powering up

This is a control board for refrigerator units. This part controls all of the functions of the refrigerator. These functions include cooling, defrost times, alarms, lights, and more.If the buttons do not allow the user to change any of the controls or functions, it is likely that this part will need to be replaced. Some users report the refrigerator being stuck in a certain setting for an extended period of time. This is a high-quality replacement part. Be sure to disconnect the refrigerator from its power source prior to attempting to repair or replace this part. Wear gloves during the process for safety.This specific control board is compatible with refrigerators that are manufactured by the GE brand. It is sold individually and comes directly from the manufacturer.

This infinite switch controls the heat level of a stove's electric surface element, letting you adjust burner power from low to high for cooking precision and stable element operation. What it does:

• Regulates voltage to a surface heating element so the burner heats at the selected setting
• Allows smooth adjustment across low-to-high heat settings
• Commonly replaces a switch when a burner won't heat, only heats on certain settings, or won't turn off properly
• Works with standard knob control interfaces to change element output

• 1 infinite switch for a single surface element

• Disconnect power to the range at the breaker before servicing
• Use insulated tools and avoid contact with terminal ends; verify power is off with a meter
• Keep track of removed hardware and wire locations; take a photo before disassembly for reference

This main PCB power control board assembly replaces the appliance's primary electronic control module to restore power distribution and control functions. It's used when the unit has control or power issues that point to a failed main board. What it does:

• Manages power distribution to the appliance's motors, valves, and sensors
• Interprets control commands and runs electronic cycles for normal operation
• Can cause unresponsive controls, no power, or erratic behavior when faulty
• May trigger control-panel error codes or intermittent starting/stopping

• Disconnect power before servicing to avoid shock; follow all safety procedures
• Handle the board by its edges and use ESD protection to avoid component damage
• Reuse existing mounting hardware and connectors unless otherwise specified by the OEM

This main control board is the appliance's central electronics that manages cycles, timing and sensor inputs so the unit operates correctly. Replace a failed board to restore control and normal electronic function. What it does:

• Interprets user commands and runs selected cycles
• Controls motors, valves, heaters, and sensors through relay/output signals
• Processes sensor feedback to regulate timing and operation
• Can cause no-start, unresponsive controls, error codes, or erratic behavior when faulty

• Disconnect power before starting; risk of shock or further damage if energized
• Handle by the edges and avoid static discharge—use an anti-static wrist strap if available
• Compare part numbers and connector layout to the old board before installing
• After install, restore power and run a diagnostic or short cycle to verify operation

Defrost timer that advances the refrigerator's defrost cycle at roughly six-hour intervals to help prevent excessive frost buildup and keep cooling consistent. Replaces a failed timer to restore regular defrost scheduling. What it does:

• Advances the defrost cycle so the heater can melt frost from the evaporator on a timed schedule.
• Helps prevent heavy ice buildup that can reduce airflow and cooling performance.
• Common symptoms of a failing timer: excessive frost or ice accumulation, compressor running constantly, or inconsistent temperatures.
• Works with mechanical defrost systems to alternate between cooling and defrost intervals.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Handle connectors and wiring carefully; ensure all terminals are fully seated.
• Mounting hardware and connector types can vary by model—retain original fasteners and note wiring positions before removal.

This temperature control board assembly manages refrigerator temperature settings and signals to the cooling system for reliable, consistent operation. Replaces a failed control board to restore temperature regulation and user interface response. What it does:

• Regulates temperature setpoints and sends signals to the compressor, fans and defrost system
• Restores responsive front-panel controls and temperature display behavior
• Works as the central electronic controller coordinating cooling cycles

• Disconnect power before starting; risk of electric shock if not de-energized
• Handle the board by the edges and avoid static discharge (use ESD protection if available)
• Verify connector fit and orientation before fastening; do not force connectors