Refrigerator Control Board

This temperature control board assembly manages and regulates refrigerator temperature settings so your appliance maintains consistent cooling. It replaces a faulty control board to restore temperature control and proper cooling operation. What it does:

• Reads temperature sensors and sends control signals to compressor, fans, and defrost systems
• Regulates cooling cycles to help maintain set temperatures
• Can stop or erratically change cooling when failing or damaged
• Common symptoms: inconsistent temperatures, refrigerator running too long or not cooling, or control-related error codes

• Disconnect power to the appliance before starting any work
• Handle the board carefully; avoid electrostatic discharge and damaged connectors
• Verify connector locations and mounting match the original before final installation

This PCB power control board is the main electronic control that manages appliance functions and power distribution. Replacing a failed board restores proper control and helps resolve electronic and power-related faults. What it does

• Controls and coordinates appliance functions by processing user inputs and sending signals to motors, valves, heaters, and displays
• Manages power distribution to subsystems and protects against erratic electrical behavior
• Common symptoms of a failing board: appliance won't start, intermittent operation, unresponsive controls, or error codes tied to electronic control
• Replacing the board often resolves communication faults and loss-of-function related to the main control electronics

• One PCB power control board assembly (as shown)

• Disconnect power before starting; risk of electric shock if power is not isolated
• Handle the board by its edges and avoid touching components or connector pins to prevent static damage
• Verify connector alignment and seating; do not force connectors—confirm match to the wiring harness

This is the main power control board assembly that manages appliance electronics and user functions, restoring proper control and responsiveness when a failed board causes power or control issues. It replaces the factory control module to regain normal operation. What it does:

• Regulates power distribution to motors, valves, and display components
• Processes user commands and runs the appliance's control logic
• Can resolve symptoms such as no power to controls, unresponsive buttons, or intermittent operation
• Helps stop erratic cycles caused by a damaged or burned control board

• Disconnect power before removing the old board to prevent shock or damage
• Handle the board by edges and avoid touching components or connector pins
• Verify connector orientation and seating during reassembly; replace any damaged wiring or connectors

This inverter is the compressor control module that converts incoming power and regulates motor speed for variable-speed compressors, helping the fridge maintain consistent temperatures and energy-efficient cooling. What it does:

• Supplies and converts power to the compressor motor so the compressor runs at variable speeds
• Regulates compressor speed to maintain steady cooling and reduce temperature swings
• Can cause the compressor not to run or intermittent cooling when faulty
• Fault symptoms may include error codes, fridge not cooling, or unusual compressor behavior/noise

• One inverter (compressor control) module

• Disconnect power to the appliance before starting to avoid shock
• Handle the board carefully and avoid static discharge; use ESD protection if available
• Verify the replacement PN and wiring match the original before connecting

This is a refrigerator control board. The function of the control board is to effectively control all of the refrigerator's functions. These functions could include cooling the fridge, defrosting, dispensing, and even lighting.In the event that any of the functions of the refrigerator stop working correctly, the control board could be the culprit. If the buttons on the unit are pressed and nothing happens, it's likely that the control board is faulty. For example, the refrigerator may not be cooling, defrosting, the lights might not work, or the ice and water will not dispense. If this is the case, this is a high-quality replacement part. Make sure to unplug the refrigerator from the electrical outlet before replacing this part. This specific control board is compatible with refrigerators that are manufactured by the Frigidaire and Crosley brands. It is sold individually and sourced straight from the manufacturer.

This switch control board replaces the oven/range user control module that routes user inputs and power to heating and accessory circuits, restoring normal control response and selector function. Ideal when buttons or settings fail to respond. What it does:

• Receives user inputs from the console and sends control signals to heating elements and components
• Routes power through selector switches to select temperature, mode, or burner settings
• Commonly used when controls are unresponsive, intermittent, or produce incorrect settings
• Helps stop erratic element behavior caused by a faulty switch/control board

• Disconnect power at the breaker or unplug the appliance before inspecting or replacing the board
• Handle the board by its edges and avoid static discharge; use anti-static precautions if available
• Verify correct replacement by matching part numbers and connector locations before installation

This board-switch is an electronic control component that operates user-selected functions and sends signals to the appliance's control system. Replacing a faulty switch restores reliable input response and control of affected cycles or settings. What it does:

• Acts as the user-input switch assembly that tells the control board which functions or cycles to start
• Commonly linked to unresponsive buttons, no-start conditions, or intermittent control behavior
• Helps restore accurate command signaling when worn or damaged contacts fail to register presses
• Works as part of the appliance's front control/interface; does not include main control board unless specified

• One board-switch assembly as shown

• Disconnect power to the appliance before attempting any service to avoid shock or injury
• Handle the board and connector pins carefully; avoid touching contacts or static-sensitive components
• Minor disassembly of the console or control panel is typically required; keep fasteners and hardware organized

Instructions are no longer included with this part. See Resource Team for instructions.

This fountain switch controls the refrigerator dispenser's user-activated circuit so the dispenser responds when the lever or pad is pressed. Replaces a worn or failed dispenser switch to restore normal dispenser control. What it does:

• Acts as the user-activated switch for the water/ice dispenser circuit
• Allows the dispenser to energize the valve or auger motor when pressed
• Commonly replaced when dispenser fails to respond or is intermittent
• Helps stop unexpected dispenser activation due to a stuck switch

• One fountain switch

• Disconnect power to the appliance before beginning any repair
• Access may require removing the dispenser/control panel; handle plastic trim carefully
• Avoid pulling on wires; disconnect connectors by their housings, not the wires

This is a frost kit for a bottom mount refrigerator. For a side by side refrigerator use part number 12002756.

This electronic console control replaces a failed or unresponsive control module so your appliance can send and receive commands reliably. It restores user input and cycle control for normal operation. What it does:

• Serves as the main control interface to manage cycles, timing, and functions
• Interprets button/knob inputs and sends signals to motors, valves, and heaters
• Prevents erratic behavior caused by failed or damaged control electronics
• Commonly used when displays, lights, or cycle selection stop responding

• One electronic console control module

• Disconnect power before attempting replacement to avoid shock or damage
• Handle the board by edges; avoid touching electronic components or solder joints
• Check connectors for proper seating and secure mounting per service manual

This control/switch board receives user input and routes electrical signals to the appliance, restoring responsive controls and allowing circuits to operate as intended. Replace a failed switch board to regain reliable control panel function. What it does:

• Routes user button/knob inputs to the appliance control circuitry
• Sends power/control signals to switches, relays, or heating elements
• Works with the appliance's wiring harness and mounting points to fit into the control area

• Disconnect power at the breaker or unplug the appliance before starting
• Handle the board carefully and avoid touching contacts; observe basic ESD precautions
• Verify connector orientation and secure all wiring; do not force connectors

This main control board manages the appliance's power distribution and electronic controls so the unit runs its cycles and responds to user inputs. Replacing a failed board restores normal control and electrical operation. What it does

• Regulates power to motors, valves, sensors and user interface components.
• Processes user commands and cycle selection from the control panel.
• Communicates status and error signals to displays and other modules.
• Common symptoms of failure: no power or blank display, unresponsive controls, intermittent operation, or error codes related to control electronics.

• One main control board (power control board assembly) as shown.

• Disconnect all power before starting work to avoid shock or damage.
• Handle the board by the edges and avoid touching components; use ESD precautions if available.
• Verify the part number on the replacement board matches the original before installation.

This main PCB is the control board that manages your appliance's functions and user interface, restoring reliable cycle selection, timing, and display feedback when the original board fails. What it does:

• Interprets user commands and runs wash/dry cycles, timers, and program logic
• Powers and communicates with the control panel/display and sensors
• Regulates valve, motor, heater, and other component signals
• Resolve symptoms like no power to controls, unresponsive panel, error codes, or erratic operation

• Disconnect power and follow lockout/tagout before starting work
• Handle the board carefully; avoid electrostatic discharge and touching components
• Installation typically requires removing the control panel and connectors; keep track of fasteners and wire locations
• Verify model compatibility and wiring harness orientation before powering on; refer to the service manual